Operating Instructions
10
US
D:\SONY TV\SY16_QW_LA1_IM_E31\4584794E31\050PAC.fm masterpage: Left
KDL-48W650D / 40W650D / 32W600D
4-584-794-E3(1)
TV
(Power) / + / –
Short press to turn the TV on.
Long press until the TV turn off.
When the TV is on,
Volume
Press + or – button to increase/decrease
the volume.
You can also press until
notification is displayed. Increases/
decreases the volume by pressing the +
or – button.
Input
Press until notification is
displayed.
Moves the selected input source by
pressing + (up) or – (down) button.
Channel
Press until CH notification is
displayed.
Select the channel by pressing + (next)
or – (previous) button.
(Sensors/LED indicator)
• Receives signals from the remote
control.
Do not put anything over the sensor.
Doing so may affect its function.
• Lights up in amber when the [Sleep
Timer] or [On Timer] is set (page 28),
or the TV is in Photo Frame Mode
(page 20).
• Lights up in green when [Power
Saving] is set to [Picture Off]
(page 30).
• Lights up in green when the TV is
turned on.
• Does not light up when the TV is in
standby mode.
• Flashes while the remote control is
being operated.
Note
• Make sure that the TV is completely turned off
before unplugging the AC power cord.
• To disconnect the TV from the AC power
completely, pull the plug from the AC power
outlet.
• Please wait for a while when perform input
selection to change to other input.
Parts and Controls
2
1