D:\LIFA\@ Jobs\SY16_QW_PAD_IM_141\Full-set Data\010COV.
D:\LIFA\@ Jobs\SY16_QW_PAD_IM_141\Full-set Data\010COVTOC.fm masterpage: Left Table of Contents Safety Information . . . . . . . . . . . . . . . . . . . . . 3 Precautions . . . . . . . . . . . . . . . . . . . . . . . . . . . 5 Parts and Controls TV. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7 Remote Control . . . . . . . . . . . . . . . . . . . . . 8 Connecting TV to the Internet Setting up the Internet Connection . . . .
D:\LIFA\@ Jobs\SY16_QW_PAD_IM_141\Full-set Data\020REG.fm masterpage: Right Introduction Installation Thank you for choosing this Sony product. Before operating the TV, please read this manual thoroughly and retain it for future reference. • The TV set should be installed near an easily accessible AC power outlet (mains socket). • Place the TV set on a stable, level surface to prevent it from falling over and causing personal injury or property damage.
D:\LIFA\@ Jobs\SY16_QW_PAD_IM_141\Full-set Data\020REG.fm masterpage: Left Insert the plug fully into the AC power outlet (mains socket). Operate the TV set on a 100 V - 240 V AC supply only. When wiring cables, be sure to unplug the AC power cord (mains lead) for your safety and take care not to catch your feet on the cables. Disconnect the AC power cord (mains lead) from the AC power outlet (mains socket) before working on or moving the TV set.
D:\LIFA\@ Jobs\SY16_QW_PAD_IM_141\Full-set Data\020REG.fm masterpage: Right Environment: About LCD TV Temperature • Places that are hot, humid, or excessively dusty; where insects may enter; where it might be exposed to mechanical vibration, near flammable objects (candles, etc.). The TV set shall not be exposed to dripping or splashing and no objects filled with liquids, such as vases, shall be placed on the TV.
D:\LIFA\@ Jobs\SY16_QW_PAD_IM_141\Full-set Data\020REG.fm masterpage: Left • Dispose of batteries in an environmentally friendly way. Certain regions may regulate the disposal of batteries. Please consult your local authority. • Handle the remote control with care. Do not drop or step on it, or spill liquid of any kind onto it. • Do not place the remote control in a location near a heat source, a place subject to direct sunlight, or a damp room.
D:\LIFA\@ Jobs\SY16_QW_PAD_IM_141\Full-set Data\030PAR.fm masterpage: Right (Sensors/LED indicator) TV Note 1 • Make sure that the TV is completely turned off before unplugging the AC power cord (mains lead). • To disconnect the TV from the AC power completely, pull the plug from the mains socket. • Please wait for a while when perform input selection to change to other input. 2 (Power) / + / – Short press to turn the TV on. Long press until the TV turn off.
D:\LIFA\@ Jobs\SY16_QW_PAD_IM_141\Full-set Data\030PAR.fm masterpage: Left Number buttons Remote Control The remote control shape, location, availability and function of remote control button may vary depending on your region/country/TV model. • Select channels. For channel numbers 10 and above, enter the next digit quickly. • In text mode, enter the three digit page number to select the page. EXIT Return to the previous screen or exit from the menu.
D:\LIFA\@ Jobs\SY16_QW_PAD_IM_141\Full-set Data\030PAR.fm AUDIO (Text) Select the sound of multilingual source or dual sound for the programme current being viewed (Depend on programme source). In text mode, displays Text broadcast. Each time you press , the display changes cyclically as follows: Text Text over the TV picture (mix mode) No Text (exit the Text service) (Subtitle) Changes the subtitle setting (page 21). • Record the current programme with the USB HDD recording function.
D:\LIFA\@ Jobs\SY16_QW_PAD_IM_141\Full-set Data\040CTI.fm Connecting TV to the Internet Setting up the Internet Connection To use the network features of your TV it needs to be connected to the Internet. The set-up procedure differs depending on the type of network and LAN router. Before setting up the Internet connection, be sure to set up a LAN router. Check your wireless LAN environment using the following chart.
D:\LIFA\@ Jobs\SY16_QW_PAD_IM_141\Full-set Data\040CTI.fm Type 2: Secured network without Wi-Fi Protected Setup™ (WPS) To set up a wireless LAN, SSID (wireless network name) and security key (WEP or WPA key) will be required. If you do not know them, consult the instruction manual of your router. 1 2 Press HOME, then select [Settings] [System Settings] [Set-up] [Network] [Network Set-up].
D:\LIFA\@ Jobs\SY16_QW_PAD_IM_141\Full-set Data\040CTI.fm 3 Follow the instructions on the set-up screen. [Network Set-up] can also be set from [Auto Start-up] menu. Note • Allows automatic configuration of your wired/ wireless network. When connecting with LAN cable: Wired When connecting with built-in Wireless LAN: Wireless When connecting with both of the cables: Wired • Set to [Easy], sets the IP address automatically. For proxy server is not use.
D:\LIFA\@ Jobs\SY16_QW_PAD_IM_141\Full-set Data\050WAT.fm Watching TV 1 Press on the TV or / on the remote control to turn on the TV. 2 Press DIGITAL/ANALOG to switch between digital and analogue modes. 3 Press the number buttons or PROG +/– to select a TV channel. 4 Press +/– to adjust the volume. masterpage: Right Changing the Viewing Style Changing the Wide Mode 1 Press mode.
D:\LIFA\@ Jobs\SY16_QW_PAD_IM_141\Full-set Data\060NHM.fm Navigating through Home Menu masterpage: Left Photo Sharing Plus Connect, view and save favourite photos on TV using your devices (eg. smartphones or tablets). The HOME button allows you to access a variety of TV settings and features. HOME [All Apps] [Photo Sharing Plus] Note All Apps Internet Contents delivers a variety of ondemand entertainment straight to your TV.
D:\LIFA\@ Jobs\SY16_QW_PAD_IM_141\Full-set Data\060NHM.fm Using the TV as a Photo Frame Mode masterpage: Right Listening to FM Radio Photo Frame Mode displays the clock and calendar at the same time as displaying a photo, and listening to music or FM radio. HOME [All Apps] [FM Radio] HOME [All Apps] [Photo Frame Mode] • Press PROG +/– to select an FM radio station. Press RETURN to exit FM Radio mode.
D:\LIFA\@ Jobs\SY16_QW_PAD_IM_141\Full-set Data\060NHM.fm Digital Programme List 1 Press HOME in digital mode. 2 Press / then to select [Digital Programme List]. masterpage: Left Recordings (Australia and New Zealand model only) 1 2 Press HOME in digital mode. 3 Press / then to select [Title List], [Timer List], [Error List] or [Manual timer REC]. Press / then [Recordings].
D:\LIFA\@ Jobs\SY16_QW_PAD_IM_141\Full-set Data\060NHM.fm To adjust the picture and sound quality of USB media Press OPTIONS during media playback then select [Picture] or [Sound]. Note • Press /// then to select and adjust an item. To play a photo as a slideshow (Photo) 1 masterpage: Right • MKV (.mkv) Video Codec: WMV v9, MPEG4, H.
D:\LIFA\@ Jobs\SY16_QW_PAD_IM_141\Full-set Data\060NHM.fm Home Network Connecting to a Home Network You can enjoy various content (e.g. photo/ music/video files) stored on DLNA Certified™ media servers. The home network feature allows you to enjoy network content in other rooms. Playing Photo/Music/Video 1 Press HOME, then select [Media] [Photo], [Music] or [Video] the desired media server. 2 Select files or folders to play from the list.
D:\LIFA\@ Jobs\SY16_QW_PAD_IM_141\Full-set Data\060NHM.fm Settings System Settings Note • The options you can adjust vary depending on the situation. Unavailable options are greyed out or not displayed. Picture masterpage: Right MPEG Noise Reduction Reduces the picture noise in MPEGcompressed video. Cinema Drive Provides improved picture movement when playing BD (Blu-ray Disc), DVD or VCR images taken on film. Select [Auto] to represent original film-based content as it is. Note Sets a picture mode.
D:\LIFA\@ Jobs\SY16_QW_PAD_IM_141\Full-set Data\060NHM.fm Sound Sound Mode Select according to content you want to enjoy. Reset Reset [Equaliser], [Clear Voice], [Intelligent Volume], [Balance] and [Volume Offset] settings. Equaliser Adjusts sound frequency settings. Clear Voice Makes voices sound clearer. Intelligent Volume Minimizes the difference in volume level between all programmes and adverts.
D:\LIFA\@ Jobs\SY16_QW_PAD_IM_141\Full-set Data\060NHM.fm PC Settings Adjust the picture size, see page 13. Channel Set-up masterpage: Right Programme Sorting: Changes the order in which the channels are stored on the TV. Digital Set-up Digital Tuning: Analogue Set-up Analogue Auto Tuning: Tunes in all the available analogue channels. Usually you do not need to do this operation because the channels are already tuned when the TV was first installed.
D:\LIFA\@ Jobs\SY16_QW_PAD_IM_141\Full-set Data\060NHM.fm Audio Set-up: Audio type (Audio description) Normal Provide normal audio type. Audio Description Provides audio description (narration) of visual information if TV channels broadcast such information. For Hard Of Hearing Switches to broadcast for the hearing impaired when [For Hard Of Hearing] is selected. Spoken subtitle Switches to broadcast for the spoken subtitle audio if TV channels broadcast such information.
D:\LIFA\@ Jobs\SY16_QW_PAD_IM_141\Full-set Data\060NHM.fm Parental Lock PIN Code Sets a PIN code. Use 0-9 on the remote control to enter a four-digit PIN code. Change PIN Code Select to change your PIN code. Parental Rating Except Australia, New Zealand, Singapore and South Africa model: Sets an age restriction to viewing. To view any programme rated for ages above the age you specify, enter the correct PIN code.
D:\LIFA\@ Jobs\SY16_QW_PAD_IM_141\Full-set Data\060NHM.fm External Input Lock Locks an external input from being watched. To view a blocked external input, select [Unblocked]. Note • Entering the correct PIN code for blocked channel or external input will temporarily deactivates the [Parental Lock] feature. To reactivate the [Parental Lock] settings, turn off and on the TV. Hint • If you lost your PIN code, see page 36. Internet Lock Locks internet contents from being watched.
D:\LIFA\@ Jobs\SY16_QW_PAD_IM_141\Full-set Data\060NHM.fm Photo Frame Settings Display Mode: Allows you to select the display mode. See page 15. Clock Display: Allows you to select the clock display. Note • This option is available when [Display Mode] is set to [Image and Clock] or [Full Screen Clock]. Audio Application: Sets [FM Radio], [Music] or [Off] as audio application. Image Selection: Select image. Music Selection: Select music.
D:\LIFA\@ Jobs\SY16_QW_PAD_IM_141\Full-set Data\060NHM.fm AV Set-up Video Labels: Assigns name to external equipment input. Enable: Select [Auto] to display names only when the equipment is connected, or [Always] to display regardless of connection status. Label Inputs: Uses one of the preset labels to assign a name to connected equipment. Select [Edit] to creates your own label. Colour System: Selects the colour system according to the composite video signal from the input source.
D:\LIFA\@ Jobs\SY16_QW_PAD_IM_141\Full-set Data\060NHM.fm Device Control Keys: Select button functions of the TV’s remote control to operate the connected equipment. None Deactivates the control by the TV’s remote control. Normal For basic operations, such as navigation buttons (up, down, left or right, etc). Tuning Keys For basic operations and operation of channel-related buttons, such as PROG +/– or (0-9), etc. Useful when you control a tuner or set-top box, etc; via the remote control.
D:\LIFA\@ Jobs\SY16_QW_PAD_IM_141\Full-set Data\070OPT.fm masterpage: Left Viewing Pictures from Connected Equipment Connection Diagram You can connect a wide range of optional equipment to your TV. Note • Depending on TV model, connecting a large USB device may interfere with other connected devices beside it. • When connecting a large USB device, connect only 1 USB jack.
D:\LIFA\@ Jobs\SY16_QW_PAD_IM_141\Full-set Data\070OPT.fm Using Audio and Video Equipment 1 Turn on the connected equipment. 2 Press to display the input source. 3 Press / then to select the desired Using Screen mirroring Screen mirroring displays the screen of a compatible device (e.g. smartphones) on your large TV screen by Miracast technology. No wireless router (or access point) is required to use this feature. 1 Press the / button, then select [Screen mirroring] using / buttons.
D:\LIFA\@ Jobs\SY16_QW_PAD_IM_141\Full-set Data\080ADD.fm masterpage: Left Additional Information Installing the TV to the Wall This TV’s instruction manual only shows the steps on preparing the installation of the TV before installing to the wall. To Customers: For product protection and safety reasons, Sony strongly recommends that installation of your TV be performed by Sony dealers or licensed contractors. Do not attempt to install it yourself.
D:\LIFA\@ Jobs\SY16_QW_PAD_IM_141\Full-set Data\080ADD.fm 1 masterpage: Right Attach Wall-Mount Attachment VS (supplied with the TV) to the rear of the TV (to make it parallel with the wall). 1.5 N·m {15 kgf·cm} VS Soft cloth Note 2 Make sure that the wall has enough space for the TV and is capable of supporting a weight of at least four times that of the TV. Refer to the following table on installing the TV to the wall. See page 37-38 (Specifications) for the TV’s weight.
D:\LIFA\@ Jobs\SY16_QW_PAD_IM_141\Full-set Data\080ADD.fm masterpage: Left Note • Figures in the table may differ slightly depending on the installation. • When your TV is installed on the wall, the upper side of the TV slightly leans forward. 3 Attach the Attachment parts for Wall-Mount Bracket. Check the Attachment parts by referring to “1” of the Wall-Mount Bracket Installation Guide. Note • If using an electric screwdriver, set the torque at approximately 1.5 N·m {15 kgf·cm}.
D:\LIFA\@ Jobs\SY16_QW_PAD_IM_141\Full-set Data\080ADD.fm masterpage: Right Screw (+PSW 6 x 20) Screw (+PSW 6 x 20) Pulley VS (supplied with the TV) Spacer (20 mm) Soft cloth Belt 4 Connect necessary cables to the TV. Note • You cannot access to any terminal after installing the TV to the wall. 5 GB Model Name KDL- Hook location 48W650D 40W650D Additional Information Install the TV to the Base.
D:\LIFA\@ Jobs\SY16_QW_PAD_IM_141\Full-set Data\080ADD.fm masterpage: Left Keep the antenna cable away from other Troubleshooting When the LED indicator is flashing red, count how many times it flashes (interval time is three seconds). If the LED indicator flashes red, reset the TV by disconnecting the AC power cord (mains lead) from the TV for two minutes, then turn on the TV.
D:\LIFA\@ Jobs\SY16_QW_PAD_IM_141\Full-set Data\080ADD.fm Channels The desired channel cannot be selected Switch between digital and analogue mode and select the desired digital/analogue channel. Some channels are blank The channel is for scrambled/subscription service only. Subscribe to a pay TV service. Channel is used only for data (no picture or sound). Contact the broadcaster for transmission details.
D:\LIFA\@ Jobs\SY16_QW_PAD_IM_141\Full-set Data\080ADD.fm Reconfigure your network settings. If the LAN cable is connected to an active server and the TV has acquired an IP address, check your DLNA Certified™ media server’s connections and configurations. Note Your IP address configuration can be viewed by selecting the [View Network setting and status] option.
D:\LIFA\@ Jobs\SY16_QW_PAD_IM_141\Full-set Data\080ADD.fm The , +, and – buttons cannot be located on the TV. See below illustration for location of the buttons on the TV. Front of TV masterpage: Right Specifications System Panel system LCD (Liquid Crystal Display) Panel, LED backlight TV system Depend on your country/area selection Analogue: B/G, I, D/K, M Digital: DVB-T/DVB-T2 Colour/video system Analogue: PAL, SECAM, NTSC3.58, NTSC4.43 Digital: MPEG-2 MP@ML/HL, H.264/MPEG-4 AVC MP/HP@L4, H.
D:\LIFA\@ Jobs\SY16_QW_PAD_IM_141\Full-set Data\080ADD.fm For KDL-32W600D 640 × 480, 31.5 kHz, 60 Hz 800 × 600, 37.9 kHz, 60 Hz 1,024 × 768, 48.4 kHz, 60 Hz 1,280 × 768, 47.4 kHz, 60 Hz 1,280 × 768, 47.8 kHz, 60 Hz 1,360 × 768, 47.7 kHz, 60 Hz Audio: Two channel linear PCM: 32, 44.
D:\LIFA\@ Jobs\SY16_QW_PAD_IM_141\Full-set Data\080ADD.fm Notes on Digital TV function • Any functions related to Digital TV ( ) will only work in countries or areas where DVB-T/DVB-T2 (MPEG-2 and H.264/MPEG4 AVC) digital terrestrial signals are broadcast. Please confirm with your local dealer if you can receive a DVB-T/DVB-T2 signal where you live. • This TV set complies with DVB-T/DVB-T2 specifications, but compatibility with future DVB-T/DVB-T2 digital terrestrial broadcasts are not guaranteed.
D:\LIFA\@ Jobs\SY16_QW_PAD_IM_141\Full-set Data\090BCO.
