Operating Instructions

32
x Notes when playing back files
• While the TV is accessing the data on
the USB device, observe the following:
– Do not turn off the TV or connect USB
device.
– Do not disconnect the USB cable.
– Do not remove the USB device.
The data on the USB device may be
damaged.
• Sony will not be held liable for any
damage to, or loss of, data on the
recording media due to a malfunction of
any connected devices or the TV.
• Playback does not start automatically if
the TV is turned on after connecting the
digital still camera or other device to the
USB port.
• The USB device supports FAT16, FAT32
and NTFS. Maximum USB Mass Storage
(USB HDD) is 2TB.
• Photo Playback Auto Start works only for
photo files in the newest digital still
camera folder (DCF-compliant, highest-
numbered “DCIM” folder).
• Playback may not start automatically
when some digital still cameras (such as
cameras with internal memory) are
connected.
• The file name and folder name support
only English.
• When you connect a Sony digital still
camera, it is recommended to set the
camera’s USB connection mode to
“Auto” or “Mass Storage.” For more
information about USB connection
mode, refer to the instructions supplied
with your digital camera.
• Use a USB storage device that is
compliant with USB Mass Storage Class
standards.
• If a selected file has incorrect container
information, or is incomplete, it cannot
be played back.
x To watch 3D video in a USB device
(except KDL-70/60R520A)
You can watch 3D content by connecting
the USB device to the TV (page 14). The
file format must be supported by this TV.
For details about format, see page 37.