Operating Instructions

Using the Menus

• Favorite channel list will be cleared each time you run the Initial Setup.

• You can assign following labels for each input (except TV):

–, Cable, Satellite, VCR, DVD/BD, Home Theater, Game, Camcorder, Digital Camera, PC,

Edit

•“–” indicates that no labels are assigned.

• If you select Edit, you can edit video labels. Follow the same steps for Edit Channel Labels on

page 56.

Option Description

Info Banner Select Small to display minimal channel and program title or select Large to

display detailed channel and program information along with the TV icon if you

are viewing the TV. Select Hidden to hide information about the TV channel or

program. This information will appear if it is available from the broadcaster.

Info Banner appears on the screen each time the channel and external inputs

are changed or when DISPLAY on the remote control is pressed.

Clock/Timers Sleep Timer Set the time in minutes (Off, 15, 30, 45, 60, 90, or 120) that you

would like the TV to remain on before shutting off automatically.

On Timer Turns on the TV from standby mode at a time you set, and tuned

to a channel or input of your preference or photo frame mode.

Before setting this function, make sure you set the correct

current Time.

Current Time Set the current time manually. This can be set from Initial Setup

or Clock/Timers. Adjust the Current Time for Daylight Saving

Time.

• This TV does not have a battery powered backup for the

clock. Therefore, if there is a power failure or if you disconnect

the power cord, be sure to reset the current date and time.

Initial Setup If you miss the Initial Setup when you first connected the TV or if you want to

scan all receivable channels, select Initial Setup. Follow the instructions on the

screen. Some settings such as Picture, Sound, and Parental Lock will not be

affected by this Initial Setup. If you wish to return your TV to factory settings,

please see the Troubleshooting section on page 74.

Language Select to display all on-screen settings in your language of choice: English,

Español, Français.

Startup Logo Select On to display the logo when the TV is turned on. Select Off to disable it.

AV Setup Manage Inputs Assigns name to external equipment.

Select Auto to display names when the equipment is connected

and/or the signal of the equipment is ready to be shown, or

Always to display regardless of connection status or Off to

disable input (only for TV).

Video/

Component

Selection

Select Auto to have the TV detect and switch between the

Video or Component when Video or Component is connected.

(Continued)