CRT Television User Manual

14
Connecting the Aerial and VCR
Stabilizing the TV set
After setting up, secure the TV set to a wall, pillar, etc, using the supplied anchor attachments, for safety
purposes.
1 Remove the two screws attached to the upper rear side
of the TV set.
2 Replace the two screws with the two supplied anchor
attachments.
3 Secure a wall anchor bracket (not supplied) to a solid wall or
pillar.
4 Pass a strong cord or chain through both holes of the anchor
attachments and then secure to a wall or pillar, etc.
• Use the supplied mains lead (Type C-4, Type BF or Type C-5, see page 9).
• Use the supplied coaxial cable for aerial connection.
or
For more details regarding VCR connection, refer to
“Connecting Optional Equipment to the TV” on
page 38.
OUT IN
VCR
Overview & Installation