Operation Manual

Set Up menu

Starts the “first time operation menu” to tune in all the available channels. Usually you do

not need to do this operation because the channels are already tuned when the TV was first

installed (page 13). However, this option allows you to repeat the process (e.g., to retune the

TV after moving house, or to search for new channels that have been launched by

broadcasters).

1 Press OK to select “Auto Start Up”.

2 Press M/m/</, to select the language, then press OK.

3 Press M/m to select the country/region in which you will operate the TV,

then press OK.

4 Press OK to select “Yes.”

The auto-tune display appears on the screen.

5 Follow steps 1 to 4 of “Auto-tuning the TV” (page 13).

Selects the language in which the menus are displayed.

1 Press OK to select “Language”.

2 Press M/m/</, to select the language, then press OK.

All menus will appear in the selected language.

Selects the country/region where you operate the TV.

1 Press OK to select “Country”.

2 Press M/m to select the country/region in which you will operate the TV,

then press OK.

If the country/region in which you want to use the TV does not appear in the list, select

“-” instead of a country/region.

You can select the options listed below on the Set Up

menu. To select options, see “Navigating through

menus” (page 16).

Auto Start Up

Language

Country

Select: Set: Back:

End:

Auto Start Up

Language

Country

Auto Tuning

Programme Sorting

Programme Labels

AV Preset

Manual Programme Preset

Set Up

English

Continued