Operation Manual

Do the following options.

1 Press OK to select “AV Preset”.

2 Press M/m to select the desired input source, then press OK.

3 Press OK. Then press M/m to select the desired option below, then

press OK.

1 Press OK to select “Manual Programme Preset”.

Before selecting “Label”/“AFT”/“Audio Filter”/“Skip”/“Decoder”, press PROG +/- to

select the programme number with the channel. You cannot select a programme number

that is set to skip (page 30).

2 Press M/m to select one of the following options, then press OK.

AV Preset

Option Description

Label Assigns a name to any equipment connected to the side and rear

sockets. The name will be displayed briefly on the screen when the

equipment is selected.

Press M/m to select one of the following, then press OK.

AV1 (or AV2/AV3/AV4/PC/HDMI) VIDEO/DVD/CABLE/

GAME/CAM/SAT: Uses one of these preset labels.

Edit: Creates your own label. Follow steps 3 through 5 of

Programme Labels (page 27).

Skip:

Skips an input source that is not connected to any equipment when

you press M/m to select the input source.

After selecting this option, press OK.

Sound Offset:

Sets an independent volume level to each equipment connected to

the TV.

Press

, to select “Sound Offset”, then press OK. Press M/m to

select the desired volume level.

Manual Programme Preset

Continued