User Guide

Audio Filter Improves the sound for individual channels in the case of distortion

in mono broadcasts. Sometimes a non-standard broadcast signal

can cause sound distortion or intermittent sound muting when

watching mono programmes.

1 Press M/m to select “Low” or “High”, then press OK.

If you do not experience any sound distortion, we recommend

that you leave this option set to the factory setting “Off”.

2 Press OK to select “Confirm”, then press OK.

Note

• You cannot receive stereo or dual sound when “Low” or “High”

is selected.

• Not available when “System” is set to “L”.

Skip Skips unused channels when you press PROG +/- to select

channels. (You can still select a skipped channel using the number

buttons.)

1 Press M/m to select “Yes”, then press OK.

2 Press OK to select “Confirm”, then press OK.

To restore a skipped channel, select “No” in step 1.

Decoder Records the scrambled channel selected when using a decoder

connected to the scart connector / 2 either directly or via a

VCR.

Note

Depending on the country/region selected for “Country” (page 26), this

option may not be available.

1 Press M/m to select “On”, then press OK.

2 Press OK to select “Confirm”, then press OK.

To cancel this function afterwards, select “Off” in step 1.

Option Description

Continued