User Guide

No colour on programmes

• Select “Reset” in the “Picture Adjustment” menu to return to the factory

settings (page 19).

No colour or irregular colour

when viewing a signal from the

Y, PB/CB, PR/CR jacks of

• Check the connection of the Y, PB/CB, PR/CR jacks of 3.

• Make sure that the Y, P

B/CB, PR/CR jacks of 3 are firmly seated in their

respective sockets.

Sound

Problem Cause/Remedy

No sound, but good picture

•Press 2 +/– or % (Mute).

• Check that “TV Speakers” is set to “on” in the “Features” menu (page 24).

Noisy sound

• See the “Picture noise” causes/remedies on page 36.

General

Problem Cause/Remedy

The TV turns off automatically

(the TV enters standby mode)

• If no signal is received or no operation is performed in the TV mode for 10

minutes, the TV automatically switches to standby mode.

Some input sources cannot be

selected

• Select “AV Preset” in the “Set Up” menu and cancel “Skip” of the input

source (page 28).

The remote does not function

• Replace the batteries.

Wrong characters appear

when viewing the menu/Text

• Select “Language” and “Country” in the “Set Up” menu and set the

language and country/region in which Text is provided (page 26). For

Cyrillic languages, we recommended that you select Russia if your own

country/region does not appear in the list.

Problem Cause/Remedy

Continued

Additional Information