Operating Instructions Projector KP-XA43

13
-EN
Getting Started
You can preset TV channels easily by storing all the
receivable channels automatically. You can also preset
channels manually or disable program positions (see
page 15 ).
Presetting channels automatically
You can preset up to 100 TV channels in numerical
sequence from the program position 1. You can preset
channels automatically using the button on the TV or
the menu.
1 Press U to turn on the TV.
2 Press .
The TV starts scanning and presetting channels
automatically. When all of the receivable channels
are stored, the AUTO PROGRAM menu
disappears.
MENU
ENTER
PRESET
SKIP: PR02 OFF
TV SYS: B /G
COL SYS : AUTO
ENGL I SH
AUTO PROGRAM
MANUA L PROGRAM
LANGUAGE/
:
ENTER ENTER
Presetting channels
TV SYS:B/G
AUTO PROGRAM
VHF LO
W
PR: 01
A / V CONTROL
DYNAM I C
SOFT
STANDARD
PERSONAL
V I DEO ADJUST
AUD I O ADJUST
MENU
To preset channels automatically using
the menu
1 Press MENU.
2 Press V or v to move the cursor (z) to the
PRESET menu ( ), and press ENTER.
3 Press V or v to move the cursor (z) to AUTO
PROGRAM, and press ENTER.
Presetting channels manually
To change the program position for a channel or to
receive a channel with a weak signal which you cannot
receive by automatic presetting, preset the channel
manually.
1 Press MENU.
2 Press V or v to move the cursor (z) to the
PRESET menu ( ), and press ENTER.
3 Select your local TV system.
(1) Press V or v to move the cursor (z) to TV SYS, and
press ENTER.
(2) Press V/b/v/B until your local TV system appears
on the menu, and press ENTER.
ENTER