User's Manual

Connecting an Indoor Aerial

(only for KV-14LT1U)

Connecting an Outdoor Aerial and VCR

Installation

Connecting cables are not supplied

For a better reception we recommend you connect an external

aerial. However, where an external aerial is not available and

your local UHF signal is strong you can connect the supplied

loop aerial as follows:

1 Insert the loop aerial into the opening on top of the set until

it clicks.

2 Connect the aerial connector to the aerial socket on the rear

of the set.

3 After turning on the TV, adjust the aerial for optimum

reception.

For more details of VCR connection, please refer

to the section “Connecting Optional

Equipment” of this instruction manual.

VCR

Scart lead is optional.

OUT IN

03KV-21LT1UGB.fm Page 7 Friday, May 11, 2001 4:55 PM