User guide

Using Optional Equipment

1 Connect your equipment to the designated TV socket, as indicated in the previous page.

2 Switch on the connected equipment.

3 To watch the picture of the connected equipment, press the button repeatedly until the

correct input symbol appears on the screen.

Symbol Input Signals

1•Audio / video input signal through the Scart connector C.

• RGB input signal through the Scart connector C. This symbol appears only

if a RGB source has been connected.

2 • Audio / video input signal through the Scart connector D.

2•S Video input signal through the Scart connector D.

3•Video input signal through the phono socket A and Audio input signal

through B.

4 Press button on the remote control to return to the normal TV picture.

For Mono Equipment

Connect the phono plug to the L/G/S/I socket on the front of the TV and select 3 input

signal using the instructions above. Finally, refer to the “Sound Adjustment” section of this

manual and select “Dual Sound” “A” on the sound menu screen (see page 11).

Additional Information

01GBKV29CL10K.fm Page 19 Tuesday, March 11, 2003 5:50 PM