To prevent fire or shock hazard, do not expose the unit to rain or moisture. CAUTION: TO REDUCE THE RISK OF ELECTRIC SHOCK, DO NOT REMOVE COVER (OR BACK). NO USER-SERVICEABLE PARTS INSIDE. REFER SERVICING TO QUALIFIED SERVICE PERSONNEL.
Precaution ‘This unit is a compact disc deck receiver which consists of an amplifier, tuner, stern cassette deck and S-compact disc player. Before operating this unit, be careful about the followings. On safety « Operate the unit only on 120 Should any solid object or liquid fall into the unit, unplug it and have it checked by qualified personnel before operating it any farther. + Unplug the unit from the wall outlet if it is not to be used for an extended period of time.
Table of Contents Plaything desired order and time. Designating the total playing ime Preparations Remote Commander You can control the system (except the cassette deck) with the supplied remote commander. Insert two R6 (size AA) batteries with the correct polarity. 1 Slide the cover in the direction of the arrow to remove it.
Connections Turn all the power of before making any connections, The diagram below tows the system connections, The letters in the diagram correspond to those in the text. How to attach & wire to the terminal p— 1 Press down on the knob. Notes on Connection . Connect the AC power cord last. Cord plugs and jacks are color coded. Red plugs and jacks are for the right channel (R) and white ones are for the left channel {L). .
Connections AM Antenna Connection Connect the supplied loop antenna to the AM and b terminals. You can attach the Loop antenna on the wall using commercially available screws. For better reception In addition to the loop antenna, connect an insulated wire feet (6 to 15 meters) to the AM terminal (the lower terminal). Be sure not to disconnect the poof antenna. Connecting a video equipment {for LB T-G2000) You can connect a video equipment to the VIDEO IN jacks only for the audio input signal.
Adjusting the Sound The following operations apply only to reproduced sound. ‘The letters in the illustration below correspond to those in the text. Adjusting the Volume To increase the volunteer, turn the VOLUME control Clockwise. To decrease it, turn the control counterclockwise. + Turn down the volume before switching on the unit to prevent possible damage to the speakers. Adjusting the Sound Quality LB T-G2000 Adjust the following & BAND GRAPHIC EQUALIZER controls. 100 Hx: Boosts or cuts heavy bass.
Receiving Broadcast You can listen stations. moms T CIC) R Tt 1 Press the TUNER button. 2 Cross the TUNING/PRESET button to enter the tuning mode, “PRESET” and the preset code disappear. :HN 963 = 3 Press the BAND button repeatedly until the desired band appears. () 8880. Each time you press the BAND button, the received ‘band changes as folios: FM stet AM 4 Keep the DUAL MODE TUNING + or button passed for over 2 seconds so that AUTO" Appears.
You can store station frequencies in the unit's memory for quick recall later frequencies in any band can be stored by specifying a code for each frequency. The code is a combination of a letter A, Bor C~ and a number 0109 A-0, B-1, Press the DUAL MODE TUNING + or button to select a number (0 9). Knopf Press tha MEMORY button.
Playing Back Tapes You can use tapes of type Land I for playback. Playing Deck Press the TAPE button. 2 Press the M/ & button. 3 Insert a recorded tape. 4 Cross the TAPE SELECT button to select tape type. 5 brass the > button. Playback starts, 10 When the tape is played to the end, the deck stops. To stop during playback, press the M / & button. To fast forward or rewind, press the P or <« button. To pause, press the 1) PAUSE button, To resume, press the 18 PAUSE button again.
Recording on Tapes ‘You can use tape typ: | and I for recording. Recording a Tape 1 Select a source {except TAPE) with the function selectors. You can also select the audio sources of equipment connected to ihe VIDEO IN jacks. 2 insert a blank tape into deck B, 3 Crass the TAPE SELECT button to select tape type.
1 Crass the TAPE button, 2 Insert a recorded tape into deck A and a blank tape into deck 8. Playing Compact Discs You can enjoy various play modes provided with the CD player. Playing the Entire Disc — Continuous Play 1 Crass the CD button. 2 Press the & OPEN/CLOSE button, 3 Press the TAPE SELECT button to defect tape type. Besu;ewuxtapesoflhesamecypefordubbing. as the switch setting is effective on both decks. 4 sate ct dubbing speed (NORMAL or HIGH) with the DUBBING SPEED button (L BY-G2000 only).
To play an 3-inch (8-em) CD Place it on the inner circle of the tray. If the disc is provided with an adapter, first remove it. Do not put a 5-inch (12-cm) CD upon an 3-inch CD. I you press the TUNER button play The disc play stops and all buttons on the CD player other than the & OPEN/CLOSE button cannot be operated.
Playing the Beginning of Each Selection You can check the selections by scanning the beginning of each selection on the disc, You can use this function in any play mode. While “ALL DISCS” is selected in continuous mode, the first selection of each disc will be scanned. M (IR FILLY 1 Place a disc on the tray and close it with the & OPEN/CLOSE button. 2 Press the MUSIC SCAN button. Each selection will be played for 10 seconds and then fade out for 2 seconds.
n a Random ST e shuffle Play Select the desired discs during stop mode (ALL DISCS SHUFFLE mode). To select the desired discs Press the DISC SELECT 1-5 buttons. A circle will appear around the selected dies number. To choose another disc, press the desired disc number button. Press the B» button ta start select shuffle play. To delete a disc which you have selected Press the DISC SELECT 1-5 button for that disc.
Playing in a Desired Order and Time ‘Out can make a program by designating up to 24 selections in the order you want them to be played. The unit will play the disc according to your program. 1 Place a disc on the tray and close it with the & OPEN/CLOSE button. 2 Cross the PROGRAM button. “PROGRAM" appears in the display. 3"A Yo program discs in the order you want to play Press the DISC SELECT 1.5 button in the order you want to program. V— ‘985240AL 5528 "AL" appears in the display.
Changing Your Program ‘You can make the following changes before starting play. Yo erase the last selection, press the CLEAR button during stop mode, Each time you press the CLEAR button, the last selection in the program will be erased. Yo delete a selection, press the CHECK button repeatedly until the undesired selection is displayed. Then press the CLEAR button.
Designating the Total Playing Time 4 Crass the EDIT button. The selections for side A are determined automatically. Then the display shows the last selection to be recorded total playing time and the selections to be recorded Tactic' o g Maintenance Keep your system in good condition to obtain the best sound. Cleaning Heads and Tape Path Clean after every 10 hours of use and before recording. 1 Press the M/ 2 button to open the cassette holder.
Specifications Compact disc deck receiver AUDIO POWER SPECIFICATIONS POWER OUTPUT AND TOTAL HARMONIC DISTORTION: With 6-ohm loads, both channels driven, from 70 15,000 Hz; rated 10 watts per channel minimum RMS power, with less than 10% total harmonic distortion from 250 milliliters to rated output.
Troubleshooting Guide operating procedures, Should any problem persist after you have made these checks, consult your nearest Sony Symptom Cause Remedy No power. AC power cord is not connected Connect the AC power cord securely. securely. No sound. Volume is not turned up. Turn up the volume, ‘Wrong connection, Connect the speaker cords correctly. Loose connections, Make connections securely, Reversed left and right sound. ‘Wrong connection. Connect the speaker cords correctly. Severe hum or noise.
Symptom Cause Remedy ‘The disc tray does noi: close. The disc is not placed correctly, Play does not start. Dirty disc. Clean the disc. The disc is inserted upside down. #¥is engaged. Press the # or 1§ button again to release it. Moisture condensation. Leave the unit turned on for approximately one hour. Play does not begin from the first mmunltisinmepmgmmorshume Press the CONTINUE button.
Location of Controls Refer to the pages indicated in parentheses for details.
Remote commander RM-5221 CD function button DISC SKIP button CD operation buttons 44 7 W1 (ADAMS) buttons, B (play) button, 1§ PAUSE button, 8 (stop) button TUNER function button [8] Tuner operation buttons SHIFT button PRESET These buttons are used to select the preset station number, TAPE function button (7} PHONON function button (operative with LB T-D250 only) [B] VIDEO function button (operative with LB T-G2000 only) |91 VOL (volume) buttons [t This button is inoperative with this unit, * AMS is the ab