Operating Instructions Compact Hi-Fi Stereo System LBT-XB44K, LBT-XB50, LBT-XB60, LBT-XB66, LBT-XB66K, LBT-XB660, LBT-D390, LBT-D790, LBT-G5500, LBT-XB33, LBT-XB33K, LBT-XB44
14
n
nn
Listening to the
radio
— Preset Tuning
2 Press TUNING MODE repeatedly
until “PRESET” appears in the
display.
MANUAL n AUTO n PRESET
3 Press TUNING +/– (or PRESET +/–
on the remote) to tune in the desired
preset station.
To Do this
Turn off the radio Press 1/u.
Adjust the volume Turn VOLUME (or press
VOLUME +/– on the
remote).
To listen to non-preset radio
stations
Press TUNING MODE repeatedly in step 2
until “MANUAL” appears, then press
TUNING +/– to tune in the desired station.
Tips
• Pressing TUNER/BAND while the system power
is off automatically turns on the system and tunes
to the last received station (One Touch Play).
• You can switch from another source to the radio
just by pressing TUNER/BAND (Automatic
Source Selection).
• If an FM program is noisy, press STEREO/
MONO so “MONO” appears in the display. There
will be no stereo effect, but the reception will
improve. Press this button again to restore the
stereo effect.
• To improve broadcast reception, move the
supplied antennas.
Frequency
Preset number
LBT-D390/D790/G5500/XB33/XB33K/XB44/
XB44K/XB50/XB60
LBT-XB66/XB66K/XB660
Preset number
Frequency
DISCALL
DOLBY NR
OFF
PRESET
TUNED
STEREO
MHz
S
DOLBY NR
OFF
TUNED
STEREO
PRESET
ALL DISC S
MHz
Before using this function, preset radio
stations in the tuner’s memory (see “Step
3: Presetting radio stations”).
1 Press TUNER/BAND repeatedly
until the band you want appears in
the display.
Each time you press this button, the
band changes as follows:
2 band model:
FM ˜ AM
3 band model:
FM n MW n LW
4 band model:
FM n MW n LW n UKV*
* When you select this band, “STEREO
Plus” appears in the display.
123
PRESET +/–
TUNER/BAND
STEREO/MONO
VOLUME
VOLUME +/–
1/u
(Power)