4-689-392-12 (1) GB Multi Camera Live Producer Operating Instructions MCX-500 Ver. 2.
0002 Table of Contents Important Notes.................................................................. 3 Chapter 1: Introduction Features and Capabilities.................................................... 4 Parts Identification.............................................................. 7 Basics of Video Switching.................................................16 BKGD Mode and EFFECT Mode.........................................17 Chapter 2: Preparation Connecting Devices..........................
0003 Important Notes Important Notes Copyrights Using the unit for video and/or audio switching, distribution over the Internet, or similar purposes may require the permission of the copyright holder of the video or audio in some cases. To protect copyright, observe the following points carefully when using the unit. ˎˎWhen connecting a recording device to the unit and recording video or audio, carefully observe laws relating to copyright.
0004 Chapter 1: Introduction Features and Capabilities The MCX-500 Multi Camera Live Producer is a compact switcher that allows video switching and audio mixing via simple operations without expert knowledge. Live controls via a computer is also possible using the unit's live Internet distribution function. The unit can be used in a wide variety of venues for events, seminars, etc. Live video switching The unit allows switching between up to four cameras.
0005 Chapter 1: Introduction: Features and Capabilities Variety of transition and composite patterns LOGO function The unit is equipped with PinP, chroma key, and luminance key video composite functions. Multiple composite patterns are available for PinP and chroma key compositing. Wipe, mix, and cut transition functions are also available. PinP You can composite 320×320-sized still images onto videos as logos.
0006 Chapter 1: Introduction: Features and Capabilities Use at Lectures and Seminars Use at Live Musical Performances You can switch between or composite video inputs from cameras and a computer used for presentations and lectures, and stream the video or record it onto a memory card. By linking with a Remote Commander, you can simultaneously control recording start/stop operations on the cameras via recording start/stop controls performed on the unit.
0007 Chapter 1: Introduction Parts Identification When an audio input is being used for PGM output, the corresponding button lights. Control Panel Video switching, audio mixing, and other live controls are performed via the control panel. 1 2 3 4 5 (Unlit): Not being used as PGM output. 6 (Lit): Output as PGM in progress. 9 INPUT TERMINALS VIDEO SDI VIDEO SDI HDMI SDI HDMI SDI TITLE TALLY MULTI VIEWER PGM LINE OUTPUT INPUT 5.
0008 Chapter 1: Introduction: Parts Identification 6. UTILITY button Allows you to adjust the headphone volume, brightness of the menu panel and control buttons, etc. Pressing the button displays the [UTILITY] menu in the menu panel. For details, see “Useful Functions (Utilities)” (page 56). 7. Video selection block (VIDEO INPUT SELECT) Allows you to select videos (materials). You can view the images available for selection and the selection results on the multi-viewer.
0009 Chapter 1: Introduction: Parts Identification (Lit): Enabled (i.e., displayed). Front For details, see “Adjustments for Inserting Text onto Videos” (page 47). TRANSITION RATE buttons 1 to 3 ˎ Allows you to select from three presets for the PGM video transition rate by pressing the respective button. You can change the transition rate presets assigned to buttons 1 to 3. 1 2 3 1. (power) indicator Indicates the unit's power status.
000 10 Chapter 1: Introduction: Parts Identification Rear 1 7 2 3 8 For details on connections, see “Connecting Devices” (page 18). 4 9 Connect a Remote Commander here when using one to control cameras. For details on connections for editing recorded data, see “Using Recorded Files” (page 65). [Tips] When performing system updates, both the USB port on the rear and the USB port on the right side of the unit are used. 3.
000 11 Chapter 1: Introduction: Parts Identification HDMI input connectors 3 and 4 (Type A) ˎ Input HDMI signals. When displaying data from a computer during a presentation, for example, connect to the computer via this connector. In addition, when compositing text using an HDMI signal, connect to the computer via this connector. [Notes] Proper operation may not be possible on some connected devices (e.g., video or audio is not output).
000 12 Chapter 1: Introduction: Parts Identification 1. [NEXT] viewer Multi-Viewer The following items appear on the external monitor (i.e., the multi-viewer) connected to the MULTI VIEWER connector on the rear of the unit. The multi-viewer allows you to monitor the input materials, PGM output video, video selected as the NEXT output, key compositions, unit status, and other information. INT material is not displayed. Displays the video selected from among the row B buttons as the NEXT output.
000 13 Chapter 1: Introduction: Parts Identification assigned to the respective input number. For details on naming input materials, see “[Input] Screen” (page 69) in the “Configuring the System Settings” section. Input image ˎ Displays inputs 1 to 4 and the TITLE material input signal. Remote camera setting ˎ When using a Remote Commander to control cameras, this displays a camera's assignment setting. Tally indicator ˎ Displays a tally for the input material based on its status.
000 14 Chapter 1: Introduction: Parts Identification 2. [Setup] tab Displays the [Setup] screen for configuring settings necessary for live control and other system settings for the unit. PC UI Preparations, such as unit setting configurations and composite adjustments, are performed using the PC UI. The PC UI also allows you to perform operations identical to those of the control panel from a remote location.
000 15 Chapter 1: Introduction: Parts Identification 3. [Pattern] tab Displays the [Pattern] screen for performing the following configurations and adjustments. ˎˎReplacing the eight pattern icons used in BKGD mode and EFFECT mode ˎˎSelecting the pattern (PinP, chroma key, luminance key) ˎˎChroma key adjustment ˎˎLuminance key adjustment ˎˎEnabling/disabling borders 4. Communication status Indicates the status of communication between the unit and the computer. : Communication with the unit is enabled.
000 16 Chapter 1: Introduction Basics of Video Switching “Video switching” refers to the process of switching between video images. You can use the unit to switch between and mix videos (input signals) from multiple cameras, VTRs, and a computer. By applying video effects, inserting text, and compositing images, you can create diverse and dynamic program outputs.
000 17 Chapter 1: Introduction BKGD Mode and EFFECT Mode Transitions are separated into two categories on the unit, BKGD mode and EFFECT mode. EFFECT mode BKGD mode Use this mode to insert image B onto image A (i.e., for compositing). Use this mode to switch completely from image A to image B (i.e., for complete replacement). Composite A Complete replacement A B B A B A B The following composite patterns are available in EFFECT mode.
000 18 Chapter 2: Preparation Connecting Devices Connect each device to the unit. If you have already connected the devices, proceed to “Chapter 3: Basic Operations” (page 29). When linking with a Remote Commander Use the OPTION cable supplied with the unit to connect the Remote Commander to the unit. Connect the cameras to the Remote Commander and the unit as follows.
000 19 Chapter 2: Preparation: Connecting Devices Connecting headphones Connecting the Video and Audio Output Devices Connect projectors, large displays, and other video output devices to the video output connectors on the rear of the unit, and connect PA systems and other audio output devices to the LINE output connectors. Connect headphones for audio monitoring to the headphones jack on the front of the unit.
000 20 Chapter 2: Preparation: Connecting Devices Connecting to a Network Connecting the Power Supply Use the PC UI network connector on the rear of the unit to connect the PC UI computer. Connect the DC output plug of the supplied AC adapter to the DC IN 12V connector on the rear of the unit, and connect the AC adapter to a power supply. For details on connections, see “Connecting a Computer for Settings Configuration” (page 22).
000 21 Chapter 2: Preparation Startup and Shutdown Configuring the Initial Settings (FirstTime Startup) 2 Configure the initial settings. Select the time zone, and tap [DONE]. Configure the current time, and tap [DONE]. Tap [] or [] to display the current hour and minute. When turning on the unit for the first time, follow the instructions on the screen to configure the initial settings. 1 Press the power switch on the front of the unit. Tap [] or [] to display your region.
000 22 Chapter 2: Preparation Connecting a Computer for Settings Configuration This section describes how to connect the unit to a PC UI computer that can perform settings configurations and composite adjustments, and how to access the unit from a web browser to display the PC UI. [Tips] The PC UI computer should not be the same as the computers used for video inputs and streaming. Recommended Computer Use a computer that meets the following system requirements.
000 23 Chapter 2: Preparation: Connecting a Computer for Settings Configuration Connecting in direct mode 1 4 Accessing the Unit from a Web Browser Tap [NETWORK]. Use a LAN cable to connect to the computer via the PC UI network connector on the rear of the unit. An authentication password is required to access the PC UI. When accessing the PC UI for the first time, you will be prompted to configure the authentication password first. 1 The [NETWORK (PC UI)] menu appears.
000 24 Chapter 2: Preparation: Connecting a Computer for Settings Configuration Improving Security 6 Use HTTPS connections with encrypted communications to improve security. After accessing the unit, download the CA certificate, and install it on your web browser. 7 1 Start your computer's web browser, and enter "http:///RootCA.crt" in the address bar. When connection is successful, the "CA certificate for the switcher" appears.
000 25 Chapter 2: Preparation Assigning Inputs To switch videos and mix audio, the signals from the devices connected to the input connectors on the rear of the unit must be assigned to inputs 1 to 4. Under default conditions, the signals are assigned as follows.
000 26 Chapter 2: Preparation: Assigning Inputs 2 Press and light the ASSIGN button. 4 Tap and select (light) the target connector. When a connector is selected (lit), it is immediately assigned and its video input appears in the multi-viewer. The selectable connectors differ depending on the input number. For INT Tap and select (light) [BLACK] or [COLOR BAR]. Button Option 1 and 2 SDI Select an option. VIDEO For inputs 1 and 2 Tap and select (light) [SDI] or [VIDEO].
000 27 Chapter 2: Preparation: Assigning Inputs 5 6 After finishing configurations, press and unlight the ASSIGN button. The [INPUT] menu disappears. Determining whether to use each channel Pre-Adjustments and Settings for Audio Inputs Determine whether to use each channel, adjust input levels, and configure settings for the audio inputs. Check the assigned video input in the multiviewer. Select the target audio input button. Adjust or configure settings for each input here.
000 28 Chapter 2: Preparation: Assigning Inputs Adjusting the audio level of each channel Linking embedded audio to its video Adjust the audio level of each channel while viewing the audio level meters in the multi-viewer. Perform the adjustments while considering the overall balance. To automatically enable or disable embedded audio in response to PGM output, link the embedded audio to its video.
000 29 Chapter 3: Basic Operations Switching Videos 1 This section describes how to switch PGM output videos using simple operations. Check the assigned videos in the [INPUT] viewer of the multi-viewer. Switching via Cuts (Basic Switching) First, let's try switching videos without applying any effects. For details on changing the assigned videos, see “Assigning Inputs” (page 25). 2 Switching videos using only the row A buttons This is the simplest switching method.
000 30 Chapter 3: Basic Operations: Switching Videos 2 Previewing videos before switching Press the button for the video you want to output next as the PGM output. Preview the video to be output next as the PGM output in the multi-viewer before switching to it. Use the buttons in rows A and B. The buttons in row B are used to select the video to output next as the PGM output.
000 31 Chapter 3: Basic Operations: Switching Videos Use the buttons in rows A and B. The buttons in row B are used to select the video to output next as the PGM output. Applying Transition Effects Now, let's try switching using patterns that slowly transition the current PGM video into the next video. Select the transition pattern here. Mix Dissolve from one video into the next.
000 32 Chapter 3: Basic Operations: Switching Videos 2 Press the BKGD button to enable BKGD mode. The pattern icons selectable in BKGD mode are displayed in the menu panel. 4 Tap and select a pattern icon. Mix For details on the modes, see “BKGD Mode and EFFECT Mode” (page 17). 3 Wipe Press the button for the video you want to output next as the PGM output. [Tips] 20 wipe patterns are available on the unit.
000 33 Chapter 3: Basic Operations: Switching Videos BKGD mode The transition starts, and the videos switch. A A/B B A/B The top of the fader corresponds to the post-transition state. When a link is configured between the video and its embedded audio, the enabling and disabling of the embedded audio is determined by whether the video is being output as the PGM video. For details on settings, see “Linking embedded audio to its video” (page 28).
000 34 Chapter 3: Basic Operations Compositing Videos Switch to EFFECT mode when you want to use the picture-in-picture (PinP) function, insert a person onto a background, or otherwise use composite effects on videos. The selected video appears in the [NEXT] viewer of the multi-viewer. 6 Press the AUTO TRANS button. Use the buttons in rows A and B. Select the video to be inserted with the row B buttons. Select the composite pattern. Select the video switching rate.
000 35 Chapter 3: Basic Operations Inserting Text onto Videos The procedure will differ depending on the format of the text signal being input from the computer. 2 Select (light) the TITLE button. Perform the following to use EFFECT mode to overlay the text (signal) that is input from a computer connected to an HDMI input connector on the rear of the unit. This method cannot be used in conjunction with other video effects.
000 36 Chapter 3: Basic Operations: Inserting Text onto Videos 2 Press the EFFECT button to enable EFFECT mode. 4 Tap and select a luminance key pattern icon. Lit The pattern icons selectable in EFFECT mode are displayed in the menu panel. 3 Luminance key Press the row B button for the text video you want to insert. Current PGM output video 5 Select a transition rate with the TRANSITION RATE buttons.
000 37 Chapter 3: Basic Operations Inserting Logos onto Videos Perform the following to composite still images that have been registered to the unit beforehand onto a video as a logo. The LOGO function can be used in both the BKGD and EFFECT modes, and can be used in conjunction with other video effects. 2 Tap [LOGO SOURCE]. The logo is composited onto the video via a cut. LIVE Logo Pre-adjustment is necessary when inserting logos onto videos.
000 38 Chapter 3: Basic Operations Live Adjustments Switching between Two Devices Connected to a Single Input You can connect two video input devices each for inputs 1 to 4 and switch input assignments. Press the ASSIGN button, press the row B button number for which you want to switch the input, and then tap the connector to which you want to switch in the [INPUT] menu.
000 39 Chapter 3: Basic Operations: Live Adjustments Listening to the Current Audio Input By tapping and holding [PFL], you can listen to and monitor only the currently selected audio via headphones. The button remains lit while it is held, and the current audio can be monitored by itself, regardless of slider adjustments. [Tips] When [CH ON] is deselected, slider adjustments can be performed, but audio cannot be monitored. For details on headphone volume, see “Adjusting the Headphone Volume” (page 38).
000 40 Chapter 4: Advanced Operations Customizing the Pattern Icons Up to eight transition pattern or composite pattern icons can be displayed in the [BKGD] and [EFFECT] menus of the menu panel. Under default conditions, the following pattern icons are displayed. BKGD mode Replacing the Pattern Icons in the [BKGD] Menu Select the transition patterns you want to display from among the templates. EFFECT mode 1 Mix PinP 2 Display the [Pattern] screen of the PC UI in BKGD mode.
000 41 Chapter 4: Advanced Operations: Customizing the Pattern Icons Select the composite pattern icon you Replacing the Pattern Icons in the [EFFECT] Menu want to replace. Removing Pattern Icons Select [Template] in the [Property] area Select the composite patterns you want to display from among the PinP, chroma key, and luminance key templates. Adjustment values for key compositing can also be configured for chroma key and luminance key pattern icons.
000 42 Chapter 4: Advanced Operations: Customizing the Pattern Icons Rearranging Pattern Icons 1 3 Enable [Move] mode, and then drag and drop the pattern icon to the desired position. After finishing configurations, select [Done]. 2 The pattern icons displayed in the menu are changed. [Tips] ˎˎ The [Empty] icon will not appear on menu panel of the unit and the PC UI's [Live] screen. ˎˎ Performing controls on the unit exits [Move] mode. After finishing configurations, select [Done].
000 43 Chapter 4: Advanced Operations Selecting Picture-in-Picture (PinP) Patterns This section describes preparations for video composites that use PinP. PinP is a composite effect that inserts an overlay video (B) onto a background video (A). A (background video) B (overlay video) Overlay video selected in row B Background video selected in row A Background video selected in row A Overlay video selected in row B A B 60 PinP patterns are available on the unit.
000 44 Chapter 4: Advanced Operations: Selecting Picture-in-Picture (PinP) Patterns Select the PinP pattern icon. There are three pages of PinP pattern icons. Selecting [Next] displays the next page, while selecting [Prev] returns to the previous page. 4 Select [Border], and select whether to include a border around the overlay video. Useful tip Useful tip When switching from BKGD mode to EFFECT mode, a composite image using the pattern that was last used in EFFECT mode may be output.
000 45 Chapter 4: Advanced Operations Adjustments for Inserting People onto Backgrounds (Chroma Key) This section describes preparations for video composites that use chroma keying. Chroma keying is a compositing technique that involves removing a specified color in the overlay video (green in the following example) and overlaying the remaining parts of the video (a person in the following example) onto the background video.
000 46 Chapter 4: Advanced Operations: Adjustments for Inserting People onto Backgrounds (Chroma Key) Select the chroma key pattern icon. [Tips] If the background video selected in row A has a 4:3 aspect ratio, select a 4:3 template. 5 Move the sample mark to select the color that will be removed for the composite. View the composition in the [PGM] viewer of the multi-viewer, and perform the following if further adjustments are necessary.
000 47 Chapter 4: Advanced Operations Adjustments for Inserting Text onto Videos Two methods are available for inserting text onto videos. ˎˎUsing RGB input signals to insert text (TITLE function) You can overlay the text (signal) that is input from a computer connected to the TITLE (RGB) input connector on the rear of the unit. This feature is called the TITLE function. The TITLE function can be used in both the BKGD and EFFECT modes, and can be used in conjunction with other video effects.
000 48 Chapter 4: Advanced Operations: Adjustments for Inserting Text onto Videos 3 Select [Title] in the [Setup] screen of the PC UI, and adjust the text composition. Perform adjustments while viewing the PGM output video in the multi-viewer. [Key Adjust] Using HDMI Input Signals to Insert Text (EFFECT Mode) Luminance key patterns are used when inserting text with EFFECT mode.
000 49 Chapter 4: Advanced Operations: Adjustments for Inserting Text onto Videos Key video selected in row B Video selected in row A Select the luminance key pattern icon. Press the CUT or AUTO TRANS button. The transition starts, and the videos are composited. Video selected in row A 3 Key video selected in row B Select [Key Adjust]. Drag each slider to adjust the level of key Select the luminance key pattern icon, and adjust the level of key removal. removal.
000 50 Chapter 4: Advanced Operations Adjustments for Inserting Logos onto Videos Example: White logo on a black background You can insert 320×320-sized still images onto videos as logos. We recommend using images that include an alpha channel for logos. However, composite adjustment can be performed without images that include an alpha channel.
000 51 Chapter 4: Advanced Operations: Adjustments for Inserting Logos onto Videos 5 Tap and select (light) the logo button that corresponds to the logo file you want to import, and then tap [IMPORT]. ˎˎLogo files larger than 320×320 The logo will be positioned at the top left while any part of the logo that exceeds the 320×320 space is deleted. Deleting logo files When import of the logo file is complete, a message prompting you to restart the unit appears.
000 52 Chapter 4: Advanced Operations: Adjustments for Inserting Logos onto Videos Specify whether to invert the key signal. Logo [Off]: Does not invert the signal. [On]: Inverts the signal. Specify the position of the inserted logo via the sliders. Specify the position using the top left of the logo file as the base point. LIVE [H]: Adjusts the horizontal position as a value between 0 to 1919 pixels. [V]: Adjusts the vertical position as a value between 0 to 1079 pixels.
000 53 Chapter 4: Advanced Operations Changing the Transition Rates Under default conditions, transition rates of 0.5, 1.0, and 1.5 seconds are assigned to TRANSITION RATE buttons 1 to 3, but you can change the rates if necessary. 1 Select [Transition Rate] in the [Setup] screen of the PC UI. [Setup] tab Change the transition rates assigned to these buttons.
000 54 Chapter 4: Advanced Operations Linking to Cameras You can perform the following via the unit by linking to cameras. ˎˎLinking with the Remote Commander Simultaneous recording control and lighting PGM/NEXT tallies Configuring the link settings Up to three cameras can be connected via linking with the Remote Commander. Select [Camera Remote] in the [Setup] screen of the PC UI, and configure the settings for linking with the Remote Commander.
000 55 Chapter 4: Advanced Operations: Linking to Cameras Assigning cameras To perform simultaneous recording controls and light PGM/NEXT tallies by linking with the Remote Commander, the cameras to be linked must be assigned. When a camera is assigned and either [Multi Cam Recording] or [Tally Control] is set to [On], camera number indicators (R1 to R3) appear in the [Input] viewer of the multi-viewer. Timecode settings must be configured to perform simultaneous recording controls.
000 56 Chapter 4: Advanced Operations Useful Functions (Utilities) 2 The unit's [UTILITY] menu allows you to adjust the unit's settings, format memory cards, and perform other operations. Formatting Memory Cards Displaying the [UTILITY] Menu Format the memory card that will be used for recording the PGM output. Display the [UTILITY 2/3] menu, and tap [FORMAT MEDIA]. [Notes] Press the UTILITY button on the control panel to display the [UTILITY] menu in the menu panel.
000 57 Chapter 4: Advanced Operations: Useful Functions (Utilities) For details on initial settings, see “Configuring the Initial Settings (First-Time Startup)” (page 21). Restoring Factory Default Conditions Restore the unit to factory default conditions and reset the authentication password for the PC UI with [INITIALIZE]. Restoring factory default conditions 1 Display the [UTILITY 2/3] menu, and tap [INITIALIZE].
000 58 Chapter 5: Streaming Streaming You can stream PGM videos using various streaming services. Limitations and restrictions for streaming videos also apply on the side of the streaming service. For details, refer to the streaming service’s website. The unit can connect to the following streaming servers. Connection to the following servers has been verified as of October 2017. ˎˎStreaming services –– Ustream –– YouTube –– Facebook –– Mudu.
000 59 Chapter 5: Streaming : Streaming but you can check it with [Account Check]. [Tips] If a message indicating that the root certificate has expired appears when you select [Account Check], update the root certificate. For details on the update procedure, see “Updating the Root Certificate” (page 57). Preparations when Using YouTube Configuring the basic information on the unit Use the PC UI to configure the basic information necessary for streaming transmissions via the unit.
000 60 Chapter 5: Streaming : Streaming Preparations when Using Facebook Configuring the basic information on the unit Preparations when Using Mudu.tv Use the PC UI to configure the basic information necessary for streaming transmissions via the unit. Creating a live stream 1 2 3 Log into Facebook via a computer, and select [Live Video].
000 61 Chapter 5: Streaming : Streaming Configuring the basic information on the unit Preparations when Using Media Servers Use the PC UI to configure the basic information necessary for streaming transmissions via the unit. 1 Select [Streaming] in the [Setup] screen of the PC UI, select the tab in which you want to configure Mudu.tv ([Profile 1] to [Profile 3]), and configure each item.
000 62 Chapter 5: Streaming : Streaming ˎˎ[Low Bandwidth]: Low bandwidth settings Select [Set]. A message indicating that configuration is complete appears. Starting and Stopping Streaming Transmissions When connection to the streaming server is established, standby mode is entered and appears in the multi-viewer. For [Profile 1] to [Profile 3] The URL and settings configured via the PC UI are displayed. When connecting to YouTube, Facebook, Mudu.tv, or media servers, proceed to step 4.
000 63 Chapter 6: Recording Recording the PGM Output You can record PGM outputs to memory cards. By linking with a Remote Commander, you can have recording start/stop controls on cameras coincide with recording start/stop controls performed on the unit. For details on the format in which the files are recorded on the unit, see “File Formats” (page 88).
000 64 Chapter 6: Recording: Recording the PGM Output You can select from the following formats depending on the system format. Estimated video recording times When the system format is 1080/50i AVCHD File format AVCHD (fixed) Recording format 1080/50i FX 1080/50i FH 1080/50i HQ Bit rate Up to 24 Mbps Approx. 17 Mbps (average) Approx. 9 Mbps (average) Picture size 1920×1080 1920×1080 1440×1080 Bit rate Up to 24 Mbps Approx. 17 Mbps (average) Approx.
000 65 Chapter 6: Recording: Recording the PGM Output [Tips] The [REC RUN] / [FREE RUN] settings for [TC RUN] apply to the timecodes on recorded files. The timecode embedded in SDI outputs runs in free run mode. Tap [Done]. The previous screen appears again. Starting and Stopping Recording Stopping recording Using Recorded Files Tap [STOP ]. Sony PlayMemories Home is required to play back or edit files recorded with the unit.
000 66 Chapter 6: Recording: Recording the PGM Output Using files in USB connection mode When the connection is established, the following message appears in the menu panel and USB connection mode is enabled. Operation of the memory card inserted in the unit as a drive is now possible. Connect the unit to the computer via a USB connection, and operate the memory card inserted in the unit as a drive on the computer. 1 Use the supplied USB cable to connect the unit to the computer.
000 67 Chapter 7: Settings Configuring the Network Settings Configuring the Network Settings for Streaming Transmission To perform streaming transmissions, configure the settings for connecting the unit to the external network. When Connecting to a Network via DHCP 4 Select [OK]. Resetting Network Settings and Streaming Settings You can reset the network and streaming settings by selecting [Network Reset] in the [Setup] screen, and then selecting [Reset]. DHCP is configured by default.
000 68 Chapter 7: Settings: Configuring the Network Settings Changing the Unit’s IP Address 6 You can change the IP address used for connecting to the PC UI from a computer from its default (192.168.0.1) to a different static address. When doing so, first connect the unit to the computer in direct mode, change the unit’s IP address via the PC UI, and then change the computer’s IP address. 1 Tap [CONNECT] in the unit’s [NETWORK (PC UI)] menu again. If [DIRECT] is disabled, tap it to enable it.
000 69 Chapter 7: Settings Configuring the System Settings You can view input settings, configure output settings, and configure the unit's system settings in the [Setup] screen of the PC UI. [Tips] This screen is used only for viewing. Material assignment changes are performed in the [Live] screen or the unit's [ASSIGN] menu. [Input] Screen [Output] Screen The [Input] screen allows you to view information on the video inputs assigned to inputs 1 to 4.
000 70 Chapter 8: Appendix Transition and Composite Patterns List Transition patterns (BKGD mode) Composite patterns (EFFECT mode) Mix Wipe PinP 1 pattern 20 patterns 0 1 60 patterns Page 1/5 4 7 10 2 5 8 11 3 Page 2/5 1 2 3 4 16 * 17 * 18 * 19 * 5 6 7 8 20 * 21 * 22 * 23 * 9 10 11 12 24 * 25 * 13 14 15 90 6 9 * 12 13 14 15 16 17 18 19 20 * When switching from BKGD mode to EFFECT mode, video B will be composited automatically with these pa
000 71 Chapter 8: Appendix: Transition and Composite Patterns List Composite patterns (EFFECT mode) Page 5/5 Page 3/5 26 28 27 74 29 * 75 * 76 * 77 * Chroma key 5 patterns 52 51 31 30 33 32 78 * 79 * 80 * 91 * 54 92 Page 4/5 64 66 65 72 * 69 * * 73 * 70 93 * 94 * 95 * 71 * * 67 Luminance key 96 68 * * 97 * 98 * * * When switching from BKGD mode to EFFECT mode, video B will be composited automatically with these patterns.
000 72 Chapter 8: Appendix Menus and Default Settings The factory default setting values are indicated in bold (example: AVCHD).
000 73 Chapter 8: Appendix: Menus and Default Settings Button Menu Screen Setting item Setting values ASSIGN [1] INPUT [1] Enable / disable ENABLE, DISABLE Connector SDI, VIDEO ASSIGN [2] INPUT [2] Enable / disable ENABLE, DISABLE Connector SDI, VIDEO ASSIGN [3] INPUT [3] Enable / disable ENABLE, DISABLE Connector SDI, HDMI ASSIGN [4] INPUT [4] Enable / disable ENABLE, DISABLE Connector SDI, HDMI ASSIGN [INT] INPUT [INT] Enable / disable ENABLE, DISABLE Internal signal sele
000 74 Chapter 8: Appendix: Menus and Default Settings PC UI Tab Setup > Input Setup > Output Menu Submenu 1 Screen Setting item Video Input Information Connector Output Settings Setting values [1] SDI, VIDEO [2] SDI, VIDEO [3] SDI, HDMI [4] SDI, HDMI Video Format [1] to [4] Supported Video Format [1] to [4] Source Name [1] SDI SDI [2] SDI SDI [3] SDI SDI [4] SDI SDI [1] VIDEO VIDEO [2] VIDEO VIDEO [3] HDMI HDMI [4] HDMI HDMI HDMI 1080/50p, 1080/50i, 720/50p, 576/50p
000 75 Chapter 8: Appendix: Menus and Default Settings Tab Setup > Network Menu Submenu 1 Submenu 2 Screen Setting item Setting values Screen Setting item Setting values Network Settings Streaming Selected Streaming Mode DHCP, Manual IPv4 Address Subnet Mask Default Gateway DNS Server Preferred DNS server Alternate DNS server PC UI Not selected PC UI DIRECT IPv4 Address Subnet Mask Default Gateway Setup > Streaming Streaming Settings Profile 1 Selected Profile 1 Label Profile
000 76 Chapter 8: Appendix: Menus and Default Settings Tab Setup > Title Menu Submenu 1 Screen Setting item Title Settings Key Adjust Setting values Clip 0 to 100 (10) Gain -100 to 100 Density Position Setup > Logo Logo Settings Logo Source Key Adjust H -120 to 1079 (-60) Logo 1 Imported, No File Logo 2 Imported, No File Clip 0 to 100 (10) Gain -100 to 100 Density Logo Output H Setup > Network Reset Network Reset Assign 0 to 1919 (Logo 1: 96; Logo 2: 1503) V 0 to 1079 (54)
000 77 Chapter 8: Appendix: Menus and Default Settings Tab Pattern Menu Submenu 1 Screen Setting item Setting values BKGD Pattern Icon 0, 1, 6, 5, 3, 2, 7, 8 Move Property EFFECT Template Template Key Adjust Crop Border Selected Not selected Not selected Not selected Video selection buttons (row A) 1 to 4, INT Video selection buttons (row B) 1 to 4, INT Mode selection buttons BKGD, EFFECT CUT AUTO TRANS Setting values Move Pattern Icon 0, 1, 6, 5, 3, 2, 7, 8 Move Pattern Ic
000 78 Chapter 8: Appendix Troubleshooting Message Displays Problems and Solutions If a problem occurs during operation of the unit, a message will appear in the menu panel and the PC UI. Check the content of the message and respond accordingly. If the problem persists, write down the displayed ID number, and contact your local Sony representative. Check the following before requesting repairs. If the problem persists, contact your local Sony representative.
000 79 Chapter 8: Appendix: Troubleshooting Symptom Possible cause Solution Symptom Possible cause Solution Text created on a computer is not inserted properly. Adjustments have not been performed properly. When inserting text using an RGB input, perform adjustments in the [Title] screen of the PC UI. When inserting text using luminance keying in EFFECT mode, perform adjustments in the [Pattern] screen of the PC UI. Audio is not output from the headphones or speakers.
000 80 Chapter 8: Appendix Message List ID Message Meaning Solution 0005 The main CPU is overheating. Perform shutdown immediately. The main CPU is overheating. Perform shutdown immediately. Check that the ventilation holes are not obstructed, and check the operating environment. If the message persists after restarting the unit, contact your local Sony representative. 0006 Cannot record. Movie scene number is full. Cannot record. Movie scene number is full.
000 81 Chapter 8: Appendix: Message List ID Message Meaning Solution 0044 Memory card write incomplete. Recover data? The data written on the memory card is incomplete. Do you want to recover the data? If the data is not recovered, recording on the unit or playback in Sony PlayMemories Home may not be possible. [Notes] The recovery process does not guarantee complete recovery. For XAVC S data, you will be able to resume recording after recovery, but playback on a computer will not be possible.
000 82 Chapter 8: Appendix: Message List ID Message Meaning Solution 0107 Failed to connect to the Ustream server. Check the "Date Time". Connection to the Ustream server failed. Check the "Date Time" settings. The Ustream function is referencing the unit's date and time information. Configure the correct date and time. 0112 The URL or Stream Name is invalid. The URL or stream name is invalid. Check the URL and stream name via the PC UI. 0115 certification.pem could not be found.
000 83 Chapter 8: Appendix Maintenance and Usage Precautions Maintenance Vent care Remove dust from the ventilation holes once per month or whenever necessary. Touch panel care The surface of the LCD has a coating that can peel off when scratched or damaged. Beware of the following during handling or cleaning. ˎˎHandling with excessive hand oil, hand cream, or other oils on your hands can make it easier for the coating to peel off, so be sure to wipe them off the surface as soon as possible.
000 84 Chapter 8: Appendix: Maintenance and Usage Precautions Precautions on the Touch Panel (LCD) [Notes] ˎˎDo not press the touch panel with excessive force. Failure to obey may result in distorted image display and damage to the touch panel. ˎˎA trailing effect may appear in the image when operating in cold environments. However, this is not a malfunction. ˎˎThe area around the touch panel may heat up during use. However, this is not a malfunction.
000 85 Chapter 8: Appendix Specifications Main Unit General Power requirements 12 V DC Power consumption Approx. 23 W Dimensions Approx. 362 × 43.5 × 206 mm (14 3/8 × 1 3/4 × 8 1/8 in.) (W×H×D) Mass Approx. 2.1 kg (4 lb. 10 oz.) System Video format 1080/59.94p Hz (60p) 1080/59.94i Hz (60i) 1080/50p Hz (50p) 1080/50i Hz (50i) Streaming Video codec H.
000 86 Chapter 8: Appendix: Specifications HDMI input connectors 3 and 4 Supported Input Formats Video SDI input connectors 1 to 4 Video HD/SD HD SD Resolution Frequency / ip When the system format is 1080 50p or 1080 50i: 1920×1080 50p 1920×1080 50i When the system format is 1080 60p or 1080 60i: 1920×1080 59.94p 1920×1080 59.94i When the system format is 1080 50p or 1080 50i: 720×576 (D1 625) 50i When the system format is 1080 60p or 1080 60i: 720×480 (D1 525) 59.
000 87 Chapter 8: Appendix: Specifications Supported Output Formats Resolution 1920×1080 (HD) When the system format is 1080 60p or 1080 60i: 720×4801) 1280×720 (HD) 1920×1080 (HD) 1920×1080 (HD) PGM SDI output connector Video HD Resolution When the system format is 1080 50p: 1920×1080 When the system format is 1080 50i: 1920×1080 When the system format is 1080 60p: 1920×1080 When the system format is 1080 60i: 1920×1080 Frequency / ip 50p 59.94p 59.94p 59.94i 59.
000 88 Chapter 8: Appendix: Specifications File Formats Streaming Function Recording function Video Frame rate Recorded video format Bit rate Determined by the [FILE FORMAT] setting in the [RECORDING] menu.
000 89 Chapter 8: Appendix: Specifications Directory Structure on Memory Cards Pin Assignments The unit uses the following directory structure for files and folders on memory cards. Generally, you do not need to be concerned with this when recording with the unit. TALLY connector 1) 1 2 34 5 2) 6 7 89 1) 2) Pin No. 1) Memory Stick PRO Duo 2) SD memory card, SDHC memory card, SDXC memory card Image management files Deleting these files may prevent proper recording and playback of images.
000 90 Chapter 8: Appendix Notes on the Licenses THIS PRODUCT IS LICENSED UNDER THE AVC PATENT PORTFOLIO LICENSE FOR THE PERSONAL USE OF A CONSUMER OR OTHER USES IN WHICH IT DOES NOT RECEIVE REMUNERATION TO (i) ENCODE VIDEO IN COMPLIANCE WITH THE AVC STANDARD (“AVC VIDEO”) AND /OR (ii) DECODE AVC VIDEO THAT WAS ENCODED BY A CONSUMER ENGAGED IN A PERSONAL ACTIVITY AND/OR WAS OBTAINED FROM A VIDEO PROVIDER LICENSED TO PROVIDE AVC VIDEO. NO LICENSE IS GRANTED OR SHALL BE IMPLIED FOR ANY OTHER USE.
000 91 Chapter 8: Appendix Glossary Chroma keying Encoding Monitor XLR A method of compositing images that removes components in the foreground image that contain a specified color (chroma). Typically, a subject is captured in front of a blue background, commonly referred to as a “blue screen,” and the blue background is removed, leaving only to subject for compositing.
000 92 Chapter 8: Appendix Index A G N R Aspect ratio....................................................................................... 69 GUI video fader............................................................................... 33 [NETWORK (PC UI)] menu......................................................... 22 Recording........................................................................................... 63 ASSIGN button............................................................
000 93 Chapter 8: Appendix: Index U USB ports............................................................................................ 10 Utilities.................................................................................................. 56 UTILITY button................................................................................... 8 [UTILITY] menu................................................................................ 56 V VIDEO input connectors...................................
