User Manual

000
Chapter 2: Preparation: Assigning Inputs
27
5 After finishing configurations, press and
unlight the ASSIGN button.
The [INPUT] menu disappears.
6 Check the assigned video input in the multi-
viewer.
[Tips]
INT input cannot be checked in the multi-viewer.
Pre-Adjustments and Settings for Audio Inputs
Determine whether to use each channel, adjust input levels, and configure settings for the audio inputs.
9 INPUT TERMINALS
VIDEO
SDI
VIDEO
SDI
HDMI
SDI
HDMI
SDI
TITLE
INPUT
TALLY
MULTI VIEWER
PGM LINE
OUTPUT
Select the target audio input button.
Set to the 0 dB position.
Adjust or configure settings for each input here.
[Tips]
Decrease the volume before connecting or disconnecting input devices (input signals).
Determining whether to use each channel
Specify whether to use or disable each channel.
Press an AUDIO ACCESS button to display the
[AUDIO] menu, and select (use) or deselect [CH
ON]. When [CH ON] is deselected, the audio will be
disabled.
To use
Deselect (unlight).
To disable
Select (light).
Channel number being
configuredv
When SDI or HDMI signals are assigned to inputs
1 to 4, the embedded audio is automatically
assigned to the respectively numbered audio
inputs. However, you can disable the audio via this
setting.