User Manual

000

Chapter 2: Preparation: Assigning Inputs

Adjusting the audio level of each channel

Adjust the audio level of each channel while

viewing the audio level meters in the multi-viewer.

Perform the adjustments while considering the

overall balance.

1 Set the PGM master fader to the 0 dB position.

2 Press an AUDIO ACCESS button to display the

[AUDIO] menu.

3 Drag the slider to adjust the audio level.

You can adjust to a value between 0 to 31.

Slider

Viewing the audio level meters

The left end

represents -∞ and is

always lit green.

Over-level indicator

Lights red at 0 dB.

Lights green up to the current level.

4 Repeat the procedure to adjust each audio

input.

[Tips]

If adjustments via the unit are not sufficient, perform

adjustment on the input device as well.

Linking embedded audio to its video

To automatically enable or disable embedded

audio in response to PGM output, link the

embedded audio to its video.

When a video for which the embedded audio

channel is specified as linked is output as the

PGM output, the embedded audio is also output

in the PGM output. When the video is not being

output as the PGM output, the embedded audio

is disabled.

To link, select [LINK VIDEO].

Select (light).

[Tips]

The embedded audio can be enabled/disabled manually via

[CH ON], even when [LINK VIDEO] is selected.