User Manual

000

Chapter 7: Settings: Configuring the Network Settings

Changing the Unit’s IP Address

You can change the IP address used for connecting to the PC UI from a computer from its default

(192.168.0.1) to a different static address. When doing so, first connect the unit to the computer in direct

mode, change the unit’s IP address via the PC UI, and then change the computer’s IP address.

1 Connect the unit to the computer in direct mode.

For details on operations, see “Connecting in direct mode” (page 23).

2 Access the unit from a web browser.

For details on operations, see “Accessing the Unit from a Web Browser” (page 23).

3 Select [Network] in the [Setup] screen of the PC UI, and display the [PC UI] tab.

4 Configure your desired IP address, and select [Set].

[IPv4 Address]: Enter the IP address.

[Subnet Mask]: Enter the subnet mask.

[Default Gateway]: Enter the default gateway.

5 Change the IP address of the computer to enable communication with the unit’s changed IP address.

6 Tap [CONNECT] in the unit’s [NETWORK (PC UI)] menu again.

If [DIRECT] is disabled, tap it to enable it.

IP address

The IP address display is updated.

7 Access the unit again from a web browser.

Enter “http://<IP address displayed in the [NETWORK (PC UI)] menu>” in the address bar of the web

browser to access the unit.

The authentication password entry screen appears.

8 Enter the authentication password, and select [Log In].

When access is successful, the [Live] screen of the PC UI appears in the web browser.