User Guide

Hint
The above procedure is an example. For details, refer to the operating instructions supplied with your computer.
If the computer was connected with the headset the last time, an HFP/HSP connection is made when you turn on the headset. While the headset
is on, you can make an A2DP connection (music playback) by pressing the
button.
Note
If the last-connected BLUETOOTH device is put near the headset, the headset may connect automatically to the device by simply turning on the
headset. In this case, deactivate the BLUETOOTH function on the BLUETOOTH device or turn off the power.
If you cannot connect your BLUETOOTH device to the headset, deactivate pairing on your BLUETOOTH device and perform pairing again. For
details, refer to the operating instructions supplied with your BLUETOOTH device.
Related Topic
How to make a wireless connection to BLUETOOTH devices
Pairing and connecting with a computer (Windows 8/Windows 8.1)
Select [Advanced Operation] — [Connect to audio sink device].
6.
47