User Guide

Help Guide

Wireless Noise Canceling Stereo Headset

MDR-XB950N1

Switching the sound quality mode

The sound quality is set to the “Priority on sound quality” mode as the default setting.

When using an SBC, AAC, or aptX compatible device, use with the “Priority on sound quality” mode.

If the connection is unstable, such as when producing only intermittent sound, select the “Priority on stable connection” mode.

Sound quality and indicator (blue) of each mode

When you switch the sound quality mode, the indicator flashes in blue to show the current sound quality mode.

“Priority on sound quality” mode: 3 times

- - - -

SBC, AAC, or aptX is selected automatically.

“Priority on stable connection” mode: 1 time

SBC

To check the sound quality mode

While the headset is powered on, press and hold the button, then press the + or - button within 2 seconds (before the power

is turned off). The indicator will flash in blue 3 times (“Priority on sound quality” mode) or 1 time (“Priority on stable connection”

mode).

Note

When you turn on the headset by pressing the button only, the indicator (blue) flashes two times to indicate the power-on, but the headset

does not indicate the sound quality mode with flashes of the indicator (blue).

Turn on the headset by pressing the button for more than 2 seconds while holding the + or - button

down.

To select “Priority on stable connection,” turn on the headset while holding the - button down.

To select “Priority on sound quality,” turn on the headset while holding the + button down.