MiniDisc Deck Operating Instructions

12
GB
Recording into a new group
You can create new groups by CD album or
artist, etc.
1 Do steps 1 to 4 of “Recording to an MD”
on page 10.
2 Press GROUP ON/OFF.
The GROUP ON/OFF button lights up.
3 Press REC z.
“New Group” flashes and the deck changes
to recording pause.
4 Do steps 6 to 7 of “Recording to an MD”
on page 10.
To continue and record into another new
group, press x repeatedly after the
recording to display the disc name and the
total number of groups, then do steps 3 and
4.
If “Group Full!” appears when you
press REC z to start recording
You cannot start recording because there is
insufficient character space for group
management.
Delete unnecessary characters (disc name or
track names) until group recording is possible
(see “Erasing a track or disc name” on page 33).
Notes
The new group is added after any existing groups
with tracks registered into them.
Up to 99 groups can be registered on a single MD.
If “Group Full!” appears while recording, track
numbers are not marked.
Recording into an existing
group
You can add tracks to an existing group.
1 Do steps 1 to 4 of “Recording to an MD”
on page 10.
2 Press GROUP ON/OFF.
The GROUP ON/OFF button lights up.
3 Press GROUP SKIP repeatedly until the
group you want to record in appears.
4 Press REC z.
“New Track” flashes and the deck changes
to recording pause.
5 Do steps 6 to 7 of “Recording to an MD”
on page 10.
If “Group Full!” appears when you
press REC z to start recording
You cannot start recording because there is
insufficient character space for group
management.
Delete unnecessary characters (disc name or
track names) until group recording is possible
(see “Erasing a track or disc name” on page 33).
Notes
The recorded track is added to the end of the group.
When you newly record a track into an existing
group, the track numbers following the newly
recorded track may change when the Group function
is turned off.
If “Group Full!” appears while recording, track
numbers are not marked.