MiniDisc Deck Operating Instructions

36
GB
Tips
• To create a group without registering any tracks, turn
AMS (or press ./> repeatedly) until “None”
appears, then press AMS or YES.
“Complete!” appears for a few seconds and new
group is created.
• You can also register tracks that were recorded on a
system that does not support the Group function.
Notes
• You cannot register the same track to multiple
groups.
• If all the tracks on an MD are registered into groups,
“Assign None” appears after step 4 and you cannot
register tracks.
• When creating a group without registering any
tracks, you must enter the group name.
• If you do not enter a group name in step 4,
“Group ** (group number)” appears instead of the
group name.
These functions allow you to release group
registrations simply by specifying the group for
which you want to release the registrations. In
addition, you can also release the group
registrations of all tracks on an MD at once.
Releasing a single group
— Group Release Function
You can release the group registrations of all
tracks within the specified group and erase that
group. (However, note that the tracks are not
erased.)
1 While the deck is stopped, press
GROUP ON/OFF.
The GROUP ON/OFF button lights up.
2 Press GROUP SKIP repeatedly until the
group you want to release appears.
3 Press MENU/NO.
“Edit Menu” appears in the display.
4 Turn AMS (or press ./>
repeatedly) until “Gp Release?”
appears.
5 Press AMS or YES.
“REL Gp ** (selected group number) ??”
and the group name appears.
6 Press AMS or YES again.
“Complete!” appears.
Releasing group
registrations
— Release Function