3-100-199-23 (1) Bluetooth Audio System Bluetooth™ Audio System Operating Instructions GB Bedienungsanleitung DE Mode d’emploi FR Istruzioni per l’uso IT Gebruiksaanwijzing NL Инструкция по эксплуатации RU To cancel the demonstration (DEMO) display, see page 16. Zum Deaktivieren der Demo-Anzeige (DEMO) schlagen Sie bitte auf Seite 17 nach. Pour annuler la démonstration (DEMO), reportez-vous à la page 17. Per annullare la dimostrazione (DEMO), vedere pagina 17.
Be sure to install this unit in the dashboard of the car for safety. For installation and connections, see the supplied installation/ connections manual. This label is located on the bottom of the chassis. The nameplate indicating operating voltage, etc., is located on the bottom of the chassis. Hereby, Sony Corp., declares that this MEXBT2500 is in compliance with the essential requirements and other relevant provisions of Directive 1999/5/EC. For details, please access the following URL: http://www.
Table of Contents Welcome ! . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4 Bluetooth function Getting Started Bluetooth operations . . . . . . . . . . . . . . . . . . . . Pairing . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . About Bluetooth icons . . . . . . . . . . . . . . . . Connection . . . . . . . . . . . . . . . . . . . . . . . . . . . To switch the Bluetooth signal output of this unit to on . . . . . . . . . . . . . . . . . . . . . . . Connecting a cellular phone. . .
Welcome ! Thank you for purchasing this Sony Bluetooth™ Audio System. You can enjoy your drive with the following functions. • CD playback You can play CD-DA (also containing CD TEXT*) and CD-R/CD-RW (MP3/WMA files also containing Multi Session (page 18)). Type of discs Label on the disc CD-DA MP3 WMA • Radio reception – You can store up to 6 stations per band (FM1, FM2, FM3, MW and LW). – BTM (Best Tuning Memory): the unit selects strong signal stations and stores them.
Radio frequency exposure RF signals may affect improperly installed or inadequately shielded electronic systems in cars, such as electronic fuel injection systems, electronic antiskid (antilock) braking systems, electronic speed control systems or air bag systems. For installation or service of this device, please consult with the manufacturer or its representative of your car. Faulty installation or service may be dangerous and may invalidate any warranty that may apply to this device.
Setting the clock The clock uses a 24-hour digital indication. 1 Press and hold the select button. The setup display appears. 2 Press the select button repeatedly until “CLOCK-ADJ” appears. 3 Press (SEEK) +. The hour indication flashes. 4 Rotate the select button to set the hour and minute. To move the digital indication, press (DSPL). 5 Press the select button. The setup is complete and the clock starts.
Attaching the front panel Engage part A of the front panel with part B of the unit, as illustrated, and push the left side into position until it clicks. A B Note Do not put anything on the inner surface of the front panel.
Location of controls and basic operations Main unit 12 3 4 5 6 7 8 OFF BLUETOOTH PUSH SELECT / SOURCE EQ SEEK AUX SEEK MODE PTY DIM DSPL ALBM 1 2 REP SHUF 3 4 PAUSE 5 6 AF/TA MEX-BT2500 9 q; qa qs qd qf qg qh qj qk RESET Card remote commander RM-X304 1 4 ql OFF SOURCE ATT SEL MODE wa qs ws + wd – qd w; 8 SCRL DSPL 1 2 3 4 5 6 + VOL – wf wg Refer to the pages listed for details.
E Disc slot To insert the disc (label side up). Playback starts automatically. F Display window G AUX input jack 17 To connect a portable audio device. H Z (eject) button To eject the disc. I (front panel release) button 6 J PTY (Program Type) button 12 To select PTY in RDS. K SEEK –/+ buttons CD: To skip tracks (press); skip tracks continuously (press, then press again within about 1 second and hold); reverse/fastforward a track (press and hold).
CD Radio Storing and receiving stations Display items Caution When tuning in stations while driving, use Best Tuning Memory (BTM) to prevent an accident. Track number/Elapsed playing time, Disc/ artist name, Album number*1, Album name, Track name, Text information*2, Clock Storing automatically — BTM 1 *1 Album number is displayed only when the album is changed. *2 When playing an MP3, ID3 tag is displayed, and when playing a WMA, WMA tag is displayed. Press (SOURCE) repeatedly until “TUNER” appears.
Tip If you know the frequency of the station you want to listen to, press and hold (SEEK) –/+ to locate the approximate frequency, then press (SEEK) –/+ repeatedly to fine adjust to the desired frequency (manual tuning). Notes • Depending on the country/region, not all RDS functions may be available. • RDS will not work if the signal strength is too weak, or if the station you are tuned to is not transmitting RDS data.
Staying with one regional program — REG When the AF function is on: this unit’s factory setting restricts reception to a specific region, so you will not be switched to another regional station with a stronger frequency. If you leave this regional program’s reception area, set “REG-OFF” in setup during FM reception (page 17). Note This function does not work in the UK and in some other areas.
4 Bluetooth function Bluetooth operations To use the Bluetooth function, the following procedure is necessary. 1 Pairing: When connecting Bluetooth devices for the first time, mutual registration is required. This is called “pairing.” This registration (pairing) is required only for the first time, as this unit and the other devices will recognize each other automatically from the next time. You can pair up to 8 devices. (Depending on the device, you may need to input a passcode for each connection.
About Bluetooth icons The following icons are used by this unit. lit: flashing: off: Bluetooth signal on Pairing standby mode Bluetooth signal off lit: flashing: off: Connection successful Connecting No connection lit: flashing: off: Connection successful Connecting No connection Connection If pairing has already been achieved, start operation from here. Note While streaming Bluetooth audio, you cannot connect from this unit to the cellular phone. Connect from the cellular phone to this unit instead.
Making calls In the case of making calls from this unit, only redial is used. 1 Press (SOURCE) repeatedly until “BT PHONE” appears. 2 Press and hold (handsfree) for 3 seconds or more. The phone call starts. To end a call Press (handsfree) again. To call another phone, use your cellular phone, and then transfer the call. For call transfer details, check the following.
Other functions Changing the sound settings Adjusting the balance and fader — BAL/FAD 1 Press the select button repeatedly until “BAL” or “FAD” appears. The item changes as follows: LOW*1 t HI*1 t BAL (left-right) t FAD (front-rear) t AUX*2 t BT AU*3 *1 When EQ lite is activated (page 16). *2 When AUX source is activated (page 17). *3 When Bluetooth audio source is activated. (page 15) 2 Rotate the select button to adjust the selected item.
MONO (Monaural Mode)*2 To improve poor FM reception, select monaural reception mode. – “MONO-ON” : to hear stereo broadcast in monaural. – “MONO-OFF” (z): to hear stereo broadcast in stereo. REG*2 (Regional) To set “REG-ON” (z) or “REG-OFF” (page 12). LOUD (Loudness) To allow you to listen clearly at low volume levels. – “LOUD -ON” : to reinforce bass and treble. – “LOUD -OFF” (z) : to not reinforce bass and treble.
Additional Information Precautions • If your car has been parked in direct sunlight, allow the unit to cool off before operating it. • Power antenna (aerial) will extend automatically while the unit is operating. Moisture condensation On a rainy day or in a very damp area, moisture condensation may occur inside the lenses and display of the unit. Should this occur, the unit will not operate properly. In such a case, remove the disc and wait for about an hour until the moisture has evaporated.
Playback order of MP3/WMA files MP3/WMA Folder (album) MP3/WMA file (track) Notes • When naming an MP3 file/WMA file, be sure to add the file extension “.mp3”/“.wma” to the file name. • During playback of a VBR (variable bit rate) MP3/ WMA file or fast-forward/reverse, elapsed playing time may not display accurately. • When the disc is recorded in Multi Session, only the first track of the first session format is recognized and played (any other format is skipped).
Others Fuse replacement • Using the Bluetooth device may not function on cellular phones, depending on radio wave conditions and location where the equipment is being used. • If you experience discomfort after using the Bluetooth device, stop using the Bluetooth device immediately. Should any problem persist, consult your nearest Sony dealer. When replacing the fuse, be sure to use one matching the amperage rating stated on the original fuse.
3 Pull out the release keys to remove the protection collar. MW/LW Tuning range: MW: 531 – 1,602 kHz LW: 153 – 279 kHz Antenna (aerial) terminal: External antenna (aerial) connector Intermediate frequency: 10.7 MHz/450 kHz Sensitivity: MW: 30 µV, LW: 40 µV Wireless Communication 2 Remove the unit. 1 Insert both release keys simultaneously until they click. Hook facing inwards. 2 Pull the release keys to unseat the unit. Communication System: Bluetooth Standard version 2.
MPEG Layer-3 audio coding technology and patents licensed from Fraunhofer IIS and Thomson. Design and specifications are subject to change without notice. • Halogenated flame retardants are not used in the certain printed wiring boards. • Halogenated flame retardants are not used in cabinets. • Paper is used for the packaging cushions. Troubleshooting The following checklist will help you remedy problems you may encounter with your unit.
During FM reception, the “ST” indication flashes. • Tune in the frequency accurately. • The broadcast signal is too weak. t Set “MONO-ON” (page 17). An FM program broadcast in stereo is heard in monaural. The unit is in monaural reception mode. t Set “MONO-OFF” (page 17). RDS The SEEK starts after a few seconds of listening. The station is non-TP or has weak signal. t Deactivate TA (page 11). No traffic announcements. • Activate TA (page 11).
L. SEEK +/– The local seek mode is on during automatic tuning. NO AF There is no alternative frequency for the current station. t Press (SEEK) –/+ while the program service name is flashing. The unit starts searching for another frequency with the same PI (Program Identification) data (“PI SEEK” appears). NO INFO Text information is not written in the MP3/WMA file. NO MUSIC The disc is not a music file. t Insert a music CD. NO NAME An album/track name is not written in the track.
Wichtig! Bitte nehmen Sie sich etwas Zeit, um den Geräte-Pass vollständig auszufüllen. Dieser befindet sich auf der hinteren Umschlagseite dieser Bedienungsanleitung. Montieren Sie dieses Gerät aus Sicherheitsgründen im Armaturenbrett des Fahrzeugs. Zur Installation und zum Anschluss siehe die mitgelieferte Installations-/Anschlussanleitung. Dieses Etikett befindet sich an der Unterseite des Gehäuses. Das Typenschild mit Betriebsspannung usw. befindet sich an der Geräteunterseite.
Inhalt Willkommen!. . . . . . . . . . . . . . . . . . . . . . . . . . . 4 Vorbereitungen Zurücksetzen des Geräts . . . . . . . . . . . . . . . . . . 5 Vorbereiten der Kartenfernbedienung . . . . . . . . 5 Einstellen der Uhr . . . . . . . . . . . . . . . . . . . . . . . 6 Einstellen der Lautstärke der einzelnen Geräte . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6 Abnehmen der Frontplatte . . . . . . . . . . . . . . . . . 6 Anbringen der Frontplatte. . . . . . . . . . . . . . .
Willkommen! Danke, dass Sie sich für diese Bluetooth™Audioanlage von Sony entschieden haben. Mit diesem Gerät stehen Ihnen im Auto die folgenden Funktionen zur Verfügung. • CD-Wiedergabe Wiedergabe von CD-DAs (auch solche mit CD TEXT*) und CD-Rs/CD-RWs (MP3-/WMADateien, auch auf Multisession-CDs (Seite 19)). CD-Typ Beschriftung auf der CD Der Bluetooth-Schriftzug und die BluetoothLogos sind Eigentum von Bluetooth SIG, Inc., und ihre Verwendung durch die Sony Corporation erfolgt in Lizenz.
Hochfrequenzstrahlung HF-Signale beeinträchtigen möglicherweise nicht ordnungsgemäß installierte oder unzureichend abgeschirmte elektronische Systeme in Kraftfahrzeugen, wie z. B. elektronische Kraftstoffeinspritzsysteme, elektronische Antiblockiersysteme, elektronische Geschwindigkeitsregelsysteme oder AirbagSysteme. Zur Installation oder Wartung dieses Geräts wenden Sie sich bitte an den Fahrzeughersteller oder einen Vertreter des Herstellers.
Einstellen der Uhr Die Uhr zeigt die Uhrzeit im 24-Stunden-Format digital an. 1 Halten Sie die Auswahltaste gedrückt. Die Einstellanzeige erscheint. 2 Drücken Sie die Auswahltaste so oft, bis „CLOCK-ADJ“ angezeigt wird. 3 Drücken Sie (SEEK) +. Die Stundenanzeige blinkt. 4 Stellen Sie durch Drehen der Auswahltaste die Stunden und Minuten ein. Drücken Sie (DSPL), um zur jeweils nächsten Ziffer in der Digitalanzeige zu wechseln. 5 Drücken Sie die Auswahltaste.
Anbringen der Frontplatte Setzen Sie Teil A der Frontplatte wie abgebildet an Teil B am Gerät an und drücken Sie dann die linke Seite hinein, bis sie mit einem Klicken einrastet. A B Hinweis Legen Sie auf der Innenseite der Frontplatte nichts ab.
Lage und Grundfunktionen der Teile und Bedienelemente Hauptgerät 12 3 4 5 6 7 8 OFF BLUETOOTH PUSH SELECT / SOURCE EQ SEEK AUX SEEK MODE PTY DIM DSPL ALBM 1 2 REP SHUF 3 4 PAUSE 5 6 AF/TA MEX-BT2500 9 q; qa qs qd qf qj qg qh qk RESET Kartenfernbedienung RM-X304 1 4 ql OFF SOURCE ATT SEL MODE wa qs ws + wd – qd w; 8 SCRL DSPL 1 2 3 4 5 6 + VOL – wf wg Näheres finden Sie auf den angegebenen Seiten.
E CD-Einschub Legen Sie eine CD mit der beschrifteten Seite nach oben ein. Die Wiedergabe beginnt automatisch. O Taste AF (Alternativfrequenzen)/ TA (Verkehrsdurchsagen) 11 Einstellen von AF und TA bei einem RDS-Sender. F Display P Empfänger für die Kartenfernbedienung G AUX-Eingangsbuchse 18 Anschließen eines tragbaren Audiogeräts. Q Taste RESET (hinter der Frontplatte) 5 H Taste Z (Auswerfen) Auswerfen der CD.
CD Radio Informationen im Display Speichern und Empfangen von Sendern Achtung Titelnummer/Verstrichene Spieldauer, CD-/Interpretenname, Albumnummer*1, Albumname, Titelname, Textinformationen*2, Uhrzeit *1 Die Albumnummer wird nur beim Wechseln des Albums angezeigt. *2 Bei der Wiedergabe einer MP3-Datei wird das ID3Tag angezeigt, bei der Wiedergabe einer WMADatei wird das WMA-Tag angezeigt. Zum Wechseln der Informationen im Display drücken Sie (DSPL).
Automatisches Einstellen von Sendern 1 Wählen Sie den Frequenzbereich aus und starten Sie mit (SEEK) –/+ die Suche nach dem Sender. Der Suchlauf stoppt, wenn ein Sender empfangen wird. Wiederholen Sie diesen Vorgang, bis das Gerät den gewünschten Sender empfängt. Tipp Wenn Sie die Frequenz des gewünschten Senders kennen, halten Sie (SEEK) –/+ gedrückt, bis die Frequenz in etwa erreicht ist, und drücken Sie (SEEK) –/+ dann so oft, bis die gewünschte Frequenz genau eingestellt ist (manuelle Sendersuche).
Speichern der Lautstärke von Verkehrsdurchsagen Sie können die Lautstärke für die Verkehrsdurchsagen voreinstellen, so dass Sie sie nicht überhören. Auswählen des Programmtyps (PTY) 1 1 Stellen Sie durch Drehen des Lautstärkereglers die Lautstärke ein. 2 Halten Sie (AF/TA) gedrückt, bis „TA“ erscheint. Empfangen von Katastrophenwarnungen Wenn AF oder TA aktiviert ist, unterbrechen Katastrophenwarnungen automatisch die ausgewählte Tonquelle.
4 Bluetooth-Funktion Nutzen der Bluetooth-Funktion Damit Sie die Bluetooth-Funktion nutzen können, müssen Sie das folgende Verfahren ausführen. 1 Pairing: Wenn Sie zum ersten Mal eine Verbindung zwischen Bluetooth-Geräten herstellen wollen, ist eine gegenseitige Registrierung erforderlich. Dies wird als „Pairing“ bezeichnet. Diese Registrierung (Pairing) ist nur beim ersten Mal erforderlich, da dieses Gerät und die anderen Geräte sich ab dem nächsten Mal automatisch erkennen.
Die Bluetooth-Symbole Bei diesem Gerät werden die folgenden Symbole verwendet. leuchtet: blinkt: aus: Bluetooth-Signal ein Bereitschaftsmodus für das Pairing Bluetooth-Signal aus leuchtet: blinkt: aus: Verbindung erfolgreich Verbindung wird hergestellt Keine Verbindung leuchtet: blinkt: aus: Verbindung erfolgreich Verbindung wird hergestellt Keine Verbindung Verbindung Wenn das Pairing bereits erfolgt ist, fangen Sie hier an.
Freisprechen Anrufweiterleitung Entgegennehmen von Anrufen Wenn ein Anruf eingeht, wird über die Autolautsprecher ein Rufzeichen ausgegeben. Überprüfen Sie vorab, ob eine Verbindung zwischen diesem Gerät und dem Mobiltelefon besteht. 1 Drücken Sie (Freisprechen), wenn das Rufzeichen für einen eingehenden Anruf ertönt. Das Telefongespräch beginnt. Gehen Sie zum Aktivieren/Deaktivieren des jeweiligen Geräts (dieses Gerät/Mobiltelefon) folgendermaßen vor.
Weitere Funktionen Steuern eines Audiogeräts mit diesem Gerät Ändern der Klangeinstellungen Sie können die folgenden Funktionen an diesem Gerät ausführen, wenn das Audiogerät das Bluetooth-Profil AVRCP (Audio Video Remote Control Profile) unterstützt. Das Vorgehen hängt vom Audiogerät ab. Einstellen der Balance und des Faders — BAL/FAD Funktion Taste 1 Wiedergabe (6) (PAUSE) an diesem Gerät. Unterbrechen (6) (PAUSE)* an diesem der Wiedergabe Gerät.
Nach 3 Sekunden ist die Einstellung abgeschlossen und im Display erscheint wieder die Anzeige für den normalen Wiedergabemodus bzw. Empfangsmodus. Tipp Andere Equalizer-Typen lassen sich ebenfalls einstellen. Mit der Kartenfernbedienung Drücken Sie in Schritt 3 die Taste <, M, , oder m, um die ausgewählte Option einzustellen. Einstellen von Konfigurationsoptionen — SET 1 Halten Sie die Auswahltaste gedrückt. Die Einstellanzeige erscheint.
Einstellen des Lautstärkepegels Verwenden gesondert erhältlicher Geräte Stellen Sie unbedingt vor der Wiedergabe die Lautstärke der einzelnen angeschlossenen Audiogeräte ein. Zusätzliche Audiogeräte Wenn Sie ein gesondert erhältliches tragbares Audiogerät an die AUX-Eingangsbuchse (Stereominibuchse) am Gerät anschließen und dann einfach die Tonquelle auswählen, können Sie den Ton über die Lautsprecher des Fahrzeugs wiedergeben lassen.
Weitere Informationen Sicherheitsmaßnahmen • Wenn das Fahrzeug längere Zeit in direktem Sonnenlicht geparkt war, lassen Sie das Gerät etwas abkühlen, bevor Sie es einschalten. • Motorantennen werden automatisch ausgefahren, wenn das Gerät eingeschaltet wird. Feuchtigkeitskondensation Bei Regen oder bei sehr hoher Luftfeuchtigkeit kann sich auf den Linsen im Inneren des Geräts und im Display Feuchtigkeit niederschlagen. In diesem Fall funktioniert das Gerät nicht mehr richtig.
WMA steht für Windows Media Audio. Dabei handelt es sich um einen weiteren Formatstandard zum Komprimieren von Musikdateien. Hierbei werden Audio-CD-Daten auf etwa 1/22* ihrer ursprünglichen Größe komprimiert. * nur bei 64 Kbps • Das Gerät ist mit dem Format ISO 9660, Stufe 1/Stufe 2, dem erweiterten Joliet- bzw. Romeo-Format sowie dem Multisession-Format kompatibel. • Höchstzahl an: – Ordnern (Alben): 150 (einschließlich Stammordner und leerer Ordner).
• Da Bluetooth-Geräte und WLANs (IEEE802.11b/g) mit derselben Frequenz arbeiten, kann es zu Interferenzen im Mikrowellenbereich kommen. Daher kann sich die Kommunikationsgeschwindigkeit verringern oder Rauschen und Störungen usw. können auftreten, wenn dieses Gerät in der Nähe eines WLANGeräts verwendet wird. Gehen Sie in einem solchen Fall folgendermaßen vor: – Verwenden Sie dieses Gerät in einem Abstand von mindestens 10 m vom WLAN-Gerät.
Entsorgungshinweis: Bitte werfen Sie nur entladene Batterien in die Sammelboxen beim Handel oder den Kommunen. Entladen sind Batterien in der Regel dann, wenn das Gerät abschaltet und „Batterie leer“ signalisiert oder nach längerer Gebrauchsdauer der Batterien nicht mehr einwandfrei funktioniert. Um sicherzugehen, kleben Sie die Batteriepole z. B. mit einem Klebestreifen ab oder geben Sie die Batterien einzeln in einen Plastikbeutel. Ausbauen des Geräts 1 Entfernen Sie die Schutzumrandung.
Technische Daten CD-Player Signal-Rauschabstand: 95 dB Frequenzgang: 10 – 20.000 Hz Gleichlaufschwankungen: Unterhalb der Messgrenze Tuner FM (UKW) Empfangsbereich: 87,5 – 108,0 MHz Antennenanschluss: Anschluss für Außenantenne Zwischenfrequenz: 10,7 MHz/450 kHz Nutzbare Empfindlichkeit: 9 dBf Trennschärfe: 75 dB bei 400 kHz Signal-Rauschabstand: 67 dB (stereo), 69 dB (mono) Harmonische Verzerrung bei 1 kHz: 0,5 % (stereo), 0,3 % (mono) Kanaltrennung: 35 dB bei 1 kHz Frequenzgang: 30 – 15.
Kein Signalton ertönt. Der Signalton ist deaktiviert (Seite 17). Der Speicherinhalt wurde gelöscht. • Die Taste RESET wurde gedrückt. t Speichern Sie die Einstellungen erneut. • Das Stromversorgungskabel wurde gelöst oder die Verbindung zur Batterie besteht nicht mehr. • Das Stromversorgungskabel ist nicht richtig angeschlossen. Gespeicherte Sender und die korrekte Uhrzeit werden gelöscht. Die Sicherung ist durchgebrannt. Störgeräusche sind zu hören, wenn der Zündschlüssel gedreht wird.
Es sind keine Verkehrsdurchsagen zu hören. • Aktivieren Sie TA (Seite 11). • Der Sender sendet keine Verkehrsdurchsagen, obwohl es sich um einen Verkehrsfunksender (TP) handelt. t Stellen Sie einen anderen Sender ein. Bei der PTY-Funktion wird „- - - - - - - -“ angezeigt. • Der aktuelle Sender ist kein RDS-Sender. • Es wurden keine RDS-Daten empfangen. • Der Sender gibt den Programmtyp nicht an. Bluetooth-Funktion Das zu verbindende Gerät kann dieses Gerät nicht erkennen.
FAILURE Die Lautsprecheranschlüsse sind nicht korrekt. t Schlagen Sie in der Installationsanleitung nach, wie die Anschlüsse korrekt vorgenommen werden müssen. L. SEEK +/– Beim automatischen Sendersuchlauf ist der lokale Suchmodus aktiviert. NO AF Für den aktuellen Sender gibt es keine Alternativfrequenz. t Drücken Sie (SEEK) –/+, solange der Programmdienstname blinkt. Das Gerät beginnt dann mit der Suche nach einer Frequenz mit denselben PI-Daten (Programmkennung). „PI SEEK“ wird angezeigt.
Pour plus de sécurité, installez cet appareil dans le tableau de bord de votre véhicule. Pour de plus amples informations sur l’installation et les raccordements, reportez-vous au manuel d’installation et de raccordements fourni. Cette étiquette est située sur la partie inférieure du châssis. La plaque signalétique indiquant la tension de fonctionnement, etc. se trouve sous le boîtier de l’appareil. Par la présente, Sony Corp.
Table des matières Félicitations ! . . . . . . . . . . . . . . . . . . . . . . . . . . . 4 Fonction Bluetooth Préparation Opérations Bluetooth . . . . . . . . . . . . . . . . . . . 13 Pairage . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 13 A propos des icônes Bluetooth. . . . . . . . . . 14 Connexion. . . . . . . . . . . . . . . . . . . . . . . . . . . . 14 Pour activer la sortie du signal Bluetooth sur cet appareil . . . . . . . . . . . . . . . . . . . . . . . . .
Félicitations ! Nous vous remercions d’avoir fait l’acquisition de ce système audio Bluetooth™ Sony. Vous pouvez profiter de votre trajet grâce aux fonctions ci-dessous. • Lecture de CD Vous pouvez lire des CD-DA (contenant également des informations CD TEXT*) et des CD-R/CD-RW (fichiers MP3/WMA contenant également des multisessions (page 19)). Type de disque Symbole indiqué sur le disque CD-DA MP3 WMA La marque Bluetooth et les logos appartiennent à Bluetooth SIG, Inc.
Exposition aux fréquences radio Les signaux RF peuvent perturber des systèmes électroniques automobiles mal installés ou insuffisamment protégés, tels que les systèmes d’injection électronique, les dispositifs d’antiblocage de frein électronique (ABS), les systèmes de contrôle de vitesse électroniques ou les systèmes airbag. Veuillez confier l’installation ou l’entretien de cet appareil au constructeur ou au concessionnaire de votre véhicule.
Réglage de l’horloge L’horloge numérique fonctionne suivant un cycle de 24 heures. 1 Appuyez sur la touche de sélection et maintenez-la enfoncée. L’écran de configuration apparaît. 2 Appuyez plusieurs fois sur la touche de sélection jusqu’à ce que « CLOCKADJ » s’affiche. 3 Appuyez sur (SEEK) +. L’indication des heures clignote. 4 Tournez la touche de sélection pour régler l’heure et les minutes. Appuyez sur (DSPL) pour déplacer l’indication numérique. 5 Appuyez sur la touche de sélection.
Installation de la façade Insérez la partie A de la façade dans la partie B de l’appareil, tel qu’illustré, puis poussez sur le côté gauche jusqu’au déclic indiquant qu’elle est en position. A B Remarque Ne posez rien sur la face interne de la façade.
Emplacement des commandes et opérations de base Appareil principal 12 3 4 5 6 7 8 OFF BLUETOOTH PUSH SELECT / SOURCE EQ SEEK AUX SEEK MODE PTY DIM DSPL ALBM 1 2 REP SHUF 3 4 PAUSE 5 6 AF/TA MEX-BT2500 9 q; qa qs qd qf qj qg qh qk RESET Mini-télécommande RM-X304 1 4 ql OFF SOURCE ATT SEL MODE wa qs ws + wd – qd w; 8 SCRL DSPL 1 2 3 4 5 6 + VOL – wf wg Pour plus de détails, reportez-vous aux numéros de pages indiqués.
E Fente d’insertion des disques Permet d’insérer le disque (côté imprimé vers le haut). La lecture commence automatiquement. F Fenêtre d’affichage G Prise d’entrée AUX 18 Permet de raccorder un appareil audio portatif. H Touche Z (éjecter) Permet d’éjecter le disque. I Touche (déverrouillage de la façade) 6 J Touche PTY (Type d’émission) 12 Permet de sélectionner PTY en RDS.
CD Radio Rubriques d’affichage Mémorisation et réception des stations Attention Numéro de plage/temps de lecture écoulée, nom du disque/de l’artiste, numéro de l’album*1, nom de l’album, nom de la plage, informations textuelles*2, horloge *1 Le numéro de l’album s’affiche uniquement lorsque l’album est modifié. *2 Lorsque vous lisez un fichier MP3, l’étiquette ID3 s’affiche. La lecture d’un fichier WMA s’accompagne de l’affichage de l’étiquette WMA.
Recherche automatique des fréquences 1 Sélectionnez la bande, puis appuyez sur (SEEK) –/+ pour rechercher la station. Le balayage s’interrompt lorsque l’appareil capte une station. Répétez cette procédure jusqu’à ce que vous captiez la station souhaitée.
2 Appuyez sur la touche (AF/TA) et maintenezla enfoncée jusqu’à ce que l’indication « TA » apparaisse. Réception de messages d’urgence Lorsque la fonction AF ou TA est activée, les messages d’urgence interrompent automatiquement la source sélectionnée en cours de diffusion.
4 Fonction Bluetooth Opérations Bluetooth La procédure suivante est nécessaire afin d’utiliser la fonction Bluetooth. 1 Pairage : Lorsque vous connectez des périphériques Bluetooth pour la première fois, il est nécessaire que les périphériques se reconnaissent mutuellement. C’est ce qu’on appelle le « pairage ». Cette reconnaissance (pairage) est nécessaire la première fois uniquement ; à partir de la seconde connexion, cet appareil et le périphérique se reconnaissent automatiquement.
A propos des icônes Bluetooth Cet appareil utilise les icônes suivantes. allumé : Signal Bluetooth activé clignotant : Mode de veille de pairage Signal Bluetooth désactivé éteint : allumé : Connexion établie clignotant : Connexion en cours Aucune connexion éteint : allumé : Connexion établie clignotant : Connexion en cours Aucune connexion éteint : Connexion Si le pairage a déjà été effectué, commencez l’opération à partir de ce point.
1 Appuyez sur (mains libres) lorsqu’un appel est reçu avec une sonnerie. L’appel commence. Pour terminer un appel Appuyez à nouveau sur (mains libres). Pour rejeter un appel entrant, appuyez sur (mains libres) et maintenez la touche enfoncée pendant 2 secondes. Remarque Le micro de cet appareil est situé à l’arrière de la façade (page 9). Ne masquez pas le microphone avec du ruban adhésif, etc.
Fonctionnement d’un périphérique audio avec cet appareil Autres fonctions Vous pouvez effectuer les opérations suivantes sur cet appareil si le périphérique audio prend en charge le profil AVRCP (Audio Video Remote Control Profile) de la technologie Bluetooth. (Le fonctionnement diffère selon le périphérique audio.) Modification des caractéristiques du son Pour Appuyez sur Réglage de la balance gauche/ droite et de l’équilibre avant/arrière — BAL/FAD lire (6) (PAUSE) sur cet appareil.
Le réglage est terminé après 3 secondes et la fenêtre d’affichage revient au mode de lecture/réception normale. Conseil D’autres types d’égaliseur peuvent aussi être réglés. Avec la mini-télécommande A l’étape 3, appuyez sur <, M, , ou m pour régler le paramètre sélectionné. Réglage des paramètres de configuration — SET 1 Appuyez sur la touche de sélection et maintenez-la enfoncée. L’écran de configuration apparaît.
Utilisation d’un appareil en option Appareil audio auxiliaire En raccordant un appareil audio portatif en option à la prise d’entrée AUX (mini-prise stéréo) de l’appareil, puis en sélectionnant simplement la source, vous pouvez l’écouter par l’intermédiaire des haut-parleurs du véhicule. Le niveau de volume peut être réglé pour corriger toutes les différences entre l’appareil et l’appareil audio portatif.
Informations complémentaires Précautions • Si votre véhicule est resté garé en plein soleil, laissez l’appareil refroidir avant de l’utiliser. • L’antenne électrique se déploie automatiquement lorsque l’appareil est en fonctionnement. Condensation Par temps de pluie ou dans des régions très humides, de l’humidité peut se condenser à l’intérieur des lentilles et dans la fenêtre d’affichage de l’appareil. Si cela se produit, l’appareil ne fonctionne pas correctement.
• L’appareil est compatible avec le format ISO 9660 niveau 1/niveau 2, avec les extensions Joliet/ Romeo et les multisessions. • Nombre maximal de : – dossiers (albums) : 150 (y compris le répertoire racine et les dossiers vides). – fichiers (plages) MP3/WMA et de dossiers contenus sur un disque : 300 (voire moins si des noms de fichier/de dossier contiennent de nombreux caractères). – caractères affichables pour un nom de dossier/ fichier : 32 (Joliet) ou 64 (Romeo). • Versions 1.0, 1.1, 2.2, 2.3 et 2.
• • • • – à proximité de portes automatiques ou d’alarmes incendie. Cet appareil prend en charge les capacités de sécurité conformes à la norme Bluetooth pour offrir une connexion sécurisée lors de l’utilisation de la technologie sans fil Bluetooth. Cependant, la sécurité peut être insuffisante selon le réglage. Soyez prudent lorsque vous communiquez au moyen de la technologie sans fil Bluetooth. Nous ne pouvons être tenus responsables de la fuite d’informations lors d’une communication Bluetooth.
Nettoyage des connecteurs L’appareil peut ne pas fonctionner correctement si les connecteurs entre l’appareil et la façade sont souillés. Pour éviter cette situation, enlevez la façade (page 6) et nettoyez les connecteurs à l’aide d’un coton-tige. N’exercez pas une pression trop forte, sinon les connecteurs peuvent être endommagés. Appareil principal Arrière de la façade 2 Retirez l’appareil. 1 Insérez simultanément les deux clés de déblocage jusqu’à ce qu’elles émettent un déclic.
Communication sans fil Système de communication : Norme Bluetooth version 2.0 Sortie : Norme Bluetooth Power Class 2 (Max. + 4 dBm) Portée de communication maximale : En ligne directe : environ 10 m*1 Bande de fréquences : bande de 2,4 GHz (2,4000 – 2,4835 GHz) Méthode de modulation : FHSS Profils Bluetooth compatibles*2 : A2DP (Advanced Audio Distribution Profile) AVRCP (Audio Video Remote Control Profile) HFP (Handsfree Profile) 1.
L’affichage disparaît de la fenêtre d’affichage ou il ne s’affiche pas. • Le régulateur de luminosité est réglé sur « DIM-ON » (page 17). • L’affichage est désactivé si vous maintenez la touche (OFF) enfoncée. t Maintenez de nouveau la touche (OFF) de l’appareil enfoncée jusqu’à ce que l’affichage apparaisse. • Les connecteurs sont sales (page 22). La fonction arrêt automatique est inopérante. L’appareil est mis sous tension. La fonction arrêt automatique s’active après la mise hors tension de l’appareil.
Fonction Bluetooth Le périphérique à connecter ne détecte pas cet appareil. • Avant d’effectuer le pairage, réglez cet appareil en mode de veille de pairage. • Lorsqu’il est connecté à un périphérique Bluetooth, cet appareil ne peut pas être détecté par un autre périphérique. Désactivez la connexion en cours et recherchez l’appareil à partir de l’autre périphérique. • Une fois le pairage du périphérique effectué, activez la sortie du signal Bluetooth (page 14). Impossible d’établir la connexion.
NO AF Il n’existe aucune fréquence alternative pour la station actuelle. t Appuyez sur (SEEK) –/+ pendant que le nom du service de l’émission clignote. L’appareil commence à rechercher une autre fréquence avec les mêmes données d’identification de programme (PI) (l’indication « PI SEEK » apparaît). NO INFO Les informations textuelles ne sont pas écrites dans le fichier MP3/WMA. NO MUSIC Le disque n’est pas un fichier audio. t Insérez un CD musical.
Si dichiara che l’apparecchio è stato fabbricato in conformità all’art.2, Comma l del D.M.28.08.1995 n.548. Per motivi di sicurezza, assicurarsi di installare il presente apparecchio nel cruscotto dell’auto. Per l’installazione e i collegamenti, consultare il manuale di istruzioni per l’installazione e i collegamenti in dotazione. Questa etichetta è posta nella parte inferiore esterna. La targhetta indicante la tensione operativa e informazioni simili è situata nella parte inferiore del rivestimento.
Indice Congratulazioni! . . . . . . . . . . . . . . . . . . . . . . . . 4 Funzione Bluetooth Operazioni preliminari Operazioni Bluetooth . . . . . . . . . . . . . . . . . . . 13 Associazione . . . . . . . . . . . . . . . . . . . . . . . . . . 13 Icone Bluetooth . . . . . . . . . . . . . . . . . . . . . 14 Connessione . . . . . . . . . . . . . . . . . . . . . . . . . . 14 Per attivare l’uscita del segnale Bluetooth del presente apparecchio . . . . . . . . . . . . . . . . .
Congratulazioni! Complimenti per l’acquisto del presente sistema audio Bluetooth™ Sony. Durante la guida, è possibile utilizzare le funzioni riportate di seguito. • Riproduzione di CD È possibile riprodurre CD-DA (contenenti inoltre CD TEXT*), CD-R/CD-RW (file MP3/ WMA contenenti inoltre registrazioni in multisessione (pagina 19)). Tipo di disco Bluetooth e i relativi loghi sono di proprietà di Bluetooth SIG, Inc. L’uso di tali marchi è concesso in licenza a Sony Corporation.
Esposizione alle radiofrequenze I segnali RF possono influire su sistemi elettronici in automobili installati in modo errato o schermati in modo non adeguato, quali ad esempio sistemi a iniezione diretta elettronici, sistemi ABS antisbandamento (antiblocco) elettronici, sistemi di controllo della velocità elettronici o sistemi con airbag. Per informazioni sull’installazione o l’assistenza del presente dispositivo, consultare il produttore o i rappresentanti dell’automobile in questione.
Impostazione dell’orologio L’orologio mostra l’indicazione digitale dell’ora in base al sistema delle 24 ore. 1 Tenere premuto il tasto di selezione. Viene visualizzato il display di impostazione. 2 Premere più volte il tasto di selezione fino a visualizzare “CLOCK-ADJ”. 3 Premere (SEEK) +. L’indicazione dell’ora lampeggia. 4 Ruotare il tasto di selezione per impostare l’ora e i minuti. Per passare da una cifra all’altra dell’indicazione digitale, premere (DSPL). 5 Premere il tasto di selezione.
Installazione del pannello anteriore Inserire la parte A del pannello anteriore nella parte B dell’apparecchio, come illustrato, quindi premere il lato sinistro finché non scatta in posizione. A B Nota Non collocare alcun oggetto sulla superficie interna del pannello anteriore.
Posizione dei comandi e operazioni di base Unità principale 12 3 4 5 6 7 8 OFF BLUETOOTH PUSH SELECT / SOURCE EQ SEEK AUX SEEK MODE PTY DIM DSPL ALBM 1 2 REP SHUF 3 4 PAUSE 5 6 AF/TA MEX-BT2500 9 q; qa qs qd qf qj qg qh qk RESET Telecomando a scheda RM-X304 1 4 ql OFF SOURCE ATT SEL MODE wa qs ws + wd – qd w; 8 SCRL DSPL 1 2 3 4 5 6 + VOL – wf wg Per ulteriori informazioni, fare riferimento alle pagine indicate.
E Alloggiamento del disco Per inserire il disco (lato etichetta verso l’alto). La riproduzione viene avviata automaticamente. F Finestra del display G Presa di ingresso AUX 18 Per collegare un dispositivo audio portatile. H Tasto Z (espulsione) Per estrarre il disco. I Tasto (rilascio pannello anteriore) 6 J Tasto PTY (tipo di programma) 12 Per selezionare il tipo di programma (PTY) nel modo RDS.
CD Radio Memorizzazione e ricezione delle stazioni Voci del display Attenzione Numero del brano/Tempo di riproduzione trascorso, Nome del disco/dell’artista, Numero dell’album*1, Nome dell’album, Nome del brano, Informazioni di testo*2, Orologio *1 Il numero dell’album viene visualizzato solo quando si cambia album. *2 Durante la riproduzione di un file MP3, viene visualizzato il tag ID3; durante la riproduzione di un file WMA, viene visualizzato il tag WMA.
Sintonizzazione automatica 1 Selezionare la banda, quindi premere (SEEK) –/+ per ricercare la stazione. La ricerca si arresta non appena l’apparecchio riceve una stazione. Ripetere questa procedura fino alla ricezione della stazione desiderata.
Preimpostazione del volume dei notiziari sul traffico È possibile preimpostare il livello del volume dei notiziari sul traffico in modo da poterli udire chiaramente. Selezione del modo PTY 1 1 Ruotare la manopola di controllo del volume per regolare il livello di volume. 2 Tenere premuto (AF/TA) fino a visualizzare “TA”. Ricezione dei notiziari di emergenza Se è attivato il modo AF o TA, gli annunci di emergenza interrompono automaticamente la riproduzione della sorgente selezionata.
L’apparecchio entra nel modo di attesa dell’associazione. Funzione Bluetooth Operazioni Bluetooth Per utilizzare la funzione Bluetooth, attenersi alla seguente procedura. 1 Associazione: Quando si stabilisce la connessione di dispositivi Bluetooth per la prima volta, è necessario che questi ultimi si registrino reciprocamente.
Icone Bluetooth Sul presente apparecchio vengono utilizzate le seguenti icone.
Uso della funzione vivavoce Ricezione di chiamate Quando si riceve una chiamata, dai diffusori dell’auto viene emesso un tono di chiamata. Innanzitutto, verificare che il presente apparecchio e il telefono cellulare siano connessi. 1 Alla ricezione di una chiamata, premere (vivavoce). La chiamata telefonica viene avviata. Per terminare una chiamata Premere di nuovo (vivavoce). Per rifiutare una chiamata in entrata, tenere premuto (vivavoce) per 2 secondi.
Uso di un dispositivo audio tramite il presente apparecchio Altre funzioni Se il dispositivo audio supporta il profilo AVRCP (Audio Video Remote Control Profile) della tecnologia Bluetooth, è possibile eseguire le operazioni riportate di seguito sul presente apparecchio (il funzionamento varia in base al dispositivo audio). Modifica delle impostazioni audio Per Premere Riprodurre (6) (PAUSE) sul presente apparecchio. Effettuare una pausa (6) (PAUSE)* sul presente apparecchio.
Dopo 3 secondi, l’impostazione è completata e il display torna al modo di riproduzione/ ricezione normale. Suggerimento È possibile regolare anche altri tipi di equalizzatore. Con il telecomando a scheda Al punto 3, per regolare la voce selezionata, premere <, M, , o m. Regolazione delle voci di impostazione — SET 1 Tenere premuto il tasto di selezione. Viene visualizzato il display di impostazione. 2 Premere più volte il tasto di selezione fino a visualizzare la voce desiderata.
Uso di apparecchi opzionali Apparecchio audio ausiliare Collegando un dispositivo audio portatile opzionale alla prese di ingresso AUX (minipresa stereo) sull’apparecchio e quindi selezionando la sorgente, è possibile ascoltare l’audio del dispositivo portatile mediante i diffusori dell’auto. Il livello del volume è regolabile per intervenire sulle differenze fra l’apparecchio e i dispositivo audio portatile.
• Non riprodurre dischi dalla forma irregolare (ad esempio a forma di cuore, quadrato o stella) con questo apparecchio, onde evitare problemi di funzionamento all’apparecchio stesso. Non utilizzare questo genere di dischi. • Non è possibile riprodurre CD da 8 cm. • Prima della riproduzione, pulire i dischi con un panno apposito disponibile in commercio. Pulire il disco procedendo dal centro verso l’esterno.
Funzione Bluetooth Informazioni sulla tecnologia Bluetooth • La tecnologia senza fili Bluetooth è una tecnologia senza fili a breve raggio che consente la comunicazione di dati senza fili tra dispositivi compatibili, quali un telefono cellulare e un auricolare. La tecnologia senza fili Bluetooth funziona entro un raggio di circa 10 m. Di solito vengono collegati due dispositivi, sebbene alcuni apparecchi supportino il collegamento di più dispositivi contemporaneamente.
Pulizia dei connettori Manutenzione Sostituzione della pila al litio del telecomando a scheda In condizioni normali, la pila dura circa 1 anno (il ciclo di vita può risultare più breve in funzione delle condizioni di utilizzo). Quando la pila si scarica, il raggio d’azione del telecomando a scheda risulta ridotto. Sostituire la pila con una pila al litio CR2025 nuova. L’uso di pile diverse potrebbe comportare il rischio di incendi o esplosioni.
2 Rimuovere l’apparecchio. MW/LW 1 Inserire contemporaneamente entrambe le chiavi di rilascio fino a farle scattare in posizione. Gamma di frequenze: MW: 531 – 1.602 kHz LW: 153 – 279 kHz Terminale dell’antenna: connettore dell’antenna esterna Frequenza intermedia: 10,7 MHz/450 kHz Sensibilità: MW: 30 µV, LW: 40 µV Gancio rivolto verso l’interno. * di cui al par. 3 dell’Allegato A al D.M. 25/06/85 e al par. 3 dell’Allegato 1 al D.M.
Tecnologia di codifica audio MPEG Layer-3 e brevetti su licenza del Fraunhofer IIS e della Thomson. Il design e le caratteristiche tecniche sono soggetti a modifiche senza preavviso. • Determinati circuiti stampati non contengono ritardanti alla fiamma alogenati. • Le parti estetiche non contengono ritardanti alla fiamma alogenati. • Come materiale di riempimento per l’imballaggio viene utilizzata carta.
Ricezione radiofonica Non è possibile ricevere le stazioni. L’audio è disturbato. • Collegare il cavo di controllo (blu) dell’antenna elettrica o il cavo di alimentazione accessoria (rosso) al cavo di alimentazione di un preamplificatore di antenne per auto (solo se lauto dispone di antenna FM/MW/LW incorporata sul vetro posteriore/ laterale). • Verificare il collegamento dell’antenna dell’auto. • L’antenna dell’auto non si estende. t Verificare il collegamento del cavo di controllo dell’antenna elettrica.
Non è possibile controllare il dispositivo audio Bluetooth connesso. Verificare che il dispositivo audio Bluetooth connesso supporti il profilo AVRCP. Non è possibile utilizzare alcune funzioni. Verificare che il dispositivo di connessione supporti le funzioni in questione. Una chiamata viene accettata accidentalmente. Sul telefono connesso è stata impostata la risposta automatica ad una chiamata. Durante le chiamate con funzione vivavoce, l’audio non viene trasmesso dai diffusori dell’auto.
Uit veiligheidsoverwegingen moet u dit apparaat in het dashboard van de auto installeren. Raadpleeg de bijgeleverde handleiding voor installatie/aansluitingen voor meer informatie over de installatie en aansluitingen. Dit label bevindt zich aan de onderkant van het apparaat. Het naamplaatje met de bedrijfsspanning, enzovoort bevindt zich aan de onderkant van de behuizing. Hierbij verklaart Sony Corp.
Inhoudsopgave Welkom! . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4 Bluetooth-functie Aan de slag Bluetooth-bewerkingen. . . . . . . . . . . . . . . . . . 13 Koppelen . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 13 Informatie over Bluetoothpictogrammen. . . . . . . . . . . . . . . . . . . . . . . 14 Verbinding . . . . . . . . . . . . . . . . . . . . . . . . . . . 14 De uitvoer van het Bluetooth-signaal van dit apparaat overschakelen naar ingeschakeld . . . . . . . . . . . . .
Welkom! Dank u voor de aankoop van dit Sony Bluetooth™-audiosysteem. U kunt tijdens het rijden genieten van de volgende functies. • CD's afspelen U kunt CD-DA's (met CD TEXT*) en CD-R's/ CD-RW's (ook MP3-/WMA-bestanden die in Multi Session (meerdere sessies) zijn opgenomen (pagina 19)) afspelen. Soorten discs Het woordmerk Bluetooth en de logo's van Bluetooth zijn eigendom van Bluetooth SIG, Inc. en Sony Corporation gebruikt deze items onder licentie.
Blootstelling aan radiofrequenties RF-signalen beïnvloeden wellicht onjuist geïnstalleerde of onvoldoende afgeschermde elektronische systemen in auto's, zoals elektronische brandstofinjectiesystemen, elektronische antiblokkeersystemen (anti-slip), elektronische snelheidsbeperkingssystemen of airbagsystemen. Voor installatie van of onderhoud aan dit apparaat kunt u het beste contact opnemen met de fabrikant van uw auto of een vertegenwoordiger van de fabrikant.
De klok instellen De digitale klok werkt met het 24-uurs apparaat. 1 Houd de selectietoets ingedrukt. Het installatievenster wordt weergegeven. 2 Druk herhaaldelijk op de selectietoets tot "CLOCK-ADJ" wordt weergegeven. 3 Druk op (SEEK) +. De aanduiding voor het uur begint te knipperen. 4 Draai de selectietoets om het uur en de minuten in te stellen. Als u de digitale aanduiding wilt verplaatsen, drukt u op (DSPL). 5 Druk op de selectietoets. Het instellen is voltooid en de klok begint te lopen.
Het voorpaneel bevestigen Plaats deel A van het voorpaneel op deel B van het apparaat, zoals wordt weergegeven, en druk de linkerzijde vast tot deze klikt. A B Opmerking Plaats niets op de binnenkant van het voorpaneel.
Bedieningselementen en algemene handelingen Hoofdeenheid 12 3 4 5 6 7 8 OFF BLUETOOTH PUSH SELECT / SOURCE EQ SEEK AUX SEEK MODE PTY DIM DSPL ALBM 1 2 REP SHUF 3 4 PAUSE 5 6 AF/TA MEX-BT2500 9 q; qa qs qd qf qg qh qj qk RESET Kaartafstandsbediening RM-X304 1 4 ql OFF SOURCE ATT SEL MODE wa qs ws + wd – qd w; 8 SCRL DSPL 1 2 3 4 5 6 + VOL – wf wg Zie de volgende pagina's voor meer informatie.
E Discsleuf De disc plaatsen (met het label naar boven). Het afspelen wordt automatisch gestart. P Ontvanger voor de kaartafstandsbediening F Display Q RESET toets (bevindt zich achter het voorpaneel) 5 G AUX-ingang 18 Een draagbaar audioapparaat aansluiten. R Microfoon 15 H Z (uitwerpen) toets De disc uitwerpen. I (voorpaneel loslaten) toets 6 J PTY (programmatype) toets 12 PTY in RDS selecteren.
CD Radio Zenders opslaan en ontvangen Displayitems Let op Tracknummer/verstreken speelduur, naam van disc/artiest, albumnummer*1, albumnaam, tracknaam, tekstinformatie*2, klok *1 Het albumnummer wordt alleen weergegeven als het album wordt gewijzigd. *2 Als u MP3-bestanden afspeelt, wordt de ID3-tag weergegeven en wanneer u WMA-bestanden afspeelt, wordt de WMA-tag weergegeven. Als u de displayitems wilt wijzigen, drukt u op (DSPL). Wilt u de displayitems rollen, dan stelt u "A.SCRL-ON" in (pagina 17).
Tip Als u de frequentie kent van de zender die u wilt beluisteren, houdt u (SEEK) –/+ ingedrukt tot de frequentie ongeveer is bereikt en drukt u vervolgens herhaaldelijk op (SEEK) –/+ om nauwkeurig af te stemmen op de gewenste frequentie (handmatig afstemmen). Opmerkingen • In bepaalde landen/regio's zijn wellicht niet alle RDS-functies beschikbaar. • RDS functioneert wellicht niet als het ontvangstsignaal zwak is of als de zender waarop u hebt afgestemd, geen RDS-gegevens verzendt.
Een regionaal programma beluisteren — REG Als de AF-functie is ingeschakeld: de fabrieksinstelling van het apparaat beperkt de ontvangst tot een bepaalde regio, zodat er niet wordt overgeschakeld naar een andere regionale zender met een sterkere frequentie. Wanneer u het ontvangstgebied van het regionale programma verlaat, stelt u tijdens FM-ontvangst "REG-OFF" in bij de instellingen (pagina 17). Opmerking Deze functie werkt niet in het Verenigd Koninkrijk en bepaalde andere gebieden.
4 Bluetooth-functie Bluetooth-bewerkingen Als u de Bluetooth-functie wilt gebruiken, is de volgende procedure vereist. 1 Koppelen: Wanneer u Bluetooth-apparaten voor het eerst aansluit, moeten de apparaten onderling worden geregistreerd. Dit wordt "koppelen" genoemd. Deze registratie (koppelen) is alleen de eerste keer vereist. Daarna herkennen dit apparaat en de andere apparaten elkaar automatisch. U kunt maximaal 8 apparaten koppelen.
Informatie over Bluetoothpictogrammen De volgende pictogrammen worden gebruikt door dit apparaat. brandt: knippert: uit: Bluetooth-signaal ingeschakeld Stand-bymodus voor koppelen Bluetooth-signaal uitgeschakeld brandt: knippert: uit: Verbinding gemaakt Verbinden Geen verbinding brandt: knippert: uit: Verbinding gemaakt Verbinden Geen verbinding Verbinding Als de koppeling al is gemaakt, begint u de bewerking vanaf dit punt.
Handsfree bellen Gesprekken ontvangen Als u een gesprek ontvangt, hoort u de beltoon via de autoluidsprekers. Controleer vooraf of er verbinding is gemaakt tussen dit apparaat en de mobiele telefoon. 1 Druk op (handsfree) wanneer een gesprek wordt ontvangen met een beltoon. Het telefoongesprek wordt gestart.
Tip U kunt een mobiele telefoon die ondersteuning biedt voor A2DP (Advanced Audio Distribution Profile), verbinden als audioapparaat en naar muziek luisteren. De registratie van alle gekoppelde apparaten verwijderen 1 Druk op (OFF). Het apparaat wordt uitgeschakeld. 2 Als " " gaat branden, houdt u (EQ/ BLUETOOTH) ingedrukt tot " uitgaat.
Met de kaartafstandsbediening Als u in stap 3 het geselecteerde item wilt aanpassen, drukt u op <, M, , of m. Instelitems aanpassen — SET 1 Houd de selectietoets ingedrukt. Het installatievenster wordt weergegeven. 2 Druk herhaaldelijk op de selectietoets tot het gewenste item wordt weergegeven. 3 Draai de selectietoets om de instelling te selecteren (bijvoorbeeld "ON" of "OFF"). 4 Houd de selectietoets ingedrukt.
Optionele apparaten gebruiken Aanvullende informatie Voorzorgsmaatregelen Extra audioapparatuur Door een optioneel draagbaar audioapparaat aan te sluiten op de AUX-ingang (stereo miniaansluiting) op het apparaat en vervolgens de bron te selecteren, kunt u het audioapparaat beluisteren via de autoluidsprekers. Het volume kan worden aangepast voor elk verschil tussen het apparaat en het draagbare audioapparaat.
• Maak een disc voor het afspelen altijd schoon met een in de handel verkrijgbare reinigingsdoek. Veeg de disc van binnen naar buiten schoon. Gebruik geen oplosmiddelen zoals benzine, thinner en in de handel verkrijgbare reinigingsmiddelen of antistatische sprays voor grammofoonplaten. Opmerkingen over CD-R's/CD-RW's • Sommige CD-R's/CD-RW's (afhankelijk van de opnameapparatuur of de staat van de disc) kunnen niet met dit apparaat worden afgespeeld.
Informatie over de Bluetoothfunctie Wat is Bluetooth-technologie? • Draadloze Bluetooth-technologie is een draadloze technologie met een klein bereik waarmee draadloze communicatie van gegevens tussen digitale apparaten, zoals een mobiele telefoon en een hoofdtelefoon, mogelijk wordt gemaakt. Draadloze Bluetooth-technologie functioneert binnen een straal van ongeveer 10 meter.
Aansluitingen schoonmaken Onderhoud De lithiumbatterij van de kaartafstandsbediening vervangen Onder normale omstandigheden gaat de batterij ongeveer 1 jaar mee. (Afhankelijk van de gebruiksomstandigheden kan de levensduur korter zijn.) Wanneer de batterij verzwakt, wordt het bereik van de kaartafstandsbediening kleiner. Vervang de batterij door een nieuwe CR2025lithiumbatterij. Bij een andere batterij bestaat er brand- of explosiegevaar.
2 Verwijder het apparaat. MW/LW 1 Plaats beide ontgrendelingssleutels tegelijkertijd en duw hierop tot deze vastklikken. Afstembereik: MW: 531 – 1.602 kHz LW: 153 – 279 kHz Antenne-aansluiting: Aansluiting voor externe antenne Tussenfrequentie: 10,7 MHz/450 kHz Gevoeligheid: MW: 30 µV, LW: 40 µV Haakje wijst naar binnen. Draadloze communicatie 2 Trek de ontgrendelingssleutels naar u toe om het apparaat los te maken. 3 Schuif het apparaat uit de houder.
MPEG Layer-3 audio-codeertechnologie en -patenten gebruikt onder licentie van Fraunhofer IIS en Thomson. Wijzigingen in ontwerp en technische gegevens voorbehouden zonder voorafgaande kennisgeving. • Er werden geen halogene brandvertragende producten gebruikt in de betreffende printplaat/printplaten. • In het omhulsel werden geen halogeen bevattende brandvertragende producten gebruikt. • Als beschermings- en opvulmateriaal werd er papier gebruikt.
Er kan niet worden afgestemd op voorkeurzenders. • Sla de juiste frequentie op in het geheugen. • Het ontvangstsignaal is te zwak. Er kan niet automatisch worden afgestemd op zenders. • De lokale zoekfunctie is niet correct ingesteld. t Het afstemmen wordt te vaak onderbroken: Stel "LOCAL-ON" in (pagina 17). t Het afstemmen stopt niet bij een zender: Stel "MONO-ON" in (pagina 17). • Het ontvangstsignaal is te zwak. t Stem handmatig af. Tijdens FM-ontvangst knippert de aanduiding "ST".
"OFF BT" verschijnt tijdens het initialiseren. Druk op (OFF). Houd (EQ/BLUETOOTH) ingedrukt tot " " uit gaat. Initialiseer opnieuw. Foutmeldingen/berichten ERROR • De disc is vuil of is omgekeerd geplaatst. t Reinig de disc of plaats deze op de juiste manier. • Er is een lege disc in het apparaat geplaatst. • De disc kan niet worden afgespeeld wegens een probleem. t Plaats een andere disc. FAILURE De luidsprekers zijn niet correct aangesloten.
Ayдиoсистемa Bluetooth Сделано в Таиланде Для обеспечения безопасности установите это устройство на приборной панели автомобиля. Перед установкой и подсоединениями прочитайте прилагаемую инструкцию по установке и подсоединению. Табличка с указанием рабочего напряжения и других характеристик находится на нижней панели корпуса. Настоящим корпорация Sony заявляет, что данное устройство MEX-BT2500 удовлетворяет основным требованиям и другим положениям Директивы 1999/5/EC.
Содержание Поздравляем с покупкой! . . . . . . . . . . . . . . 4 Функция Bluetooth Начало работы Операции Bluetooth . . . . . . . . . . . . . . . . . . 13 Согласование. . . . . . . . . . . . . . . . . . . . . . . . 13 Значки Bluetooth . . . . . . . . . . . . . . . . . . 14 Соединение . . . . . . . . . . . . . . . . . . . . . . . . . 14 Включение передачи сигнала Bluetooth на этом устройстве . . . . . . . . . . . . . . . . 14 Соединение с сотовым телефоном . . . . . . . . . . . . . . . . . . . . . . . .
Поздравляем с покупкой! Благодарим вас за приобретение аудиосистемы Sony Bluetooth™. В поездке Вы сможете использовать следующие функции проигрывателя. • Воспроизведение компакт-дисков Можно воспроизводить диски CD-DA (содержащие также информацию CD TEXT*) и CD-R/CD-RW (с файлами MP3/WMA и диски в формате Multi Session (стр. 20)). Тип диска Метка на диске CD-DA MP3 WMA • Прием радиостанций – Можно хранить в памяти до 6 станций в каждом диапазоне (FM1, FM2, FM3, MW и LW).
Подключение к другим устройствам Начало работы При подключении к другому устройству прочтите прилагаемое к нему руководство пользователя, чтобы ознакомиться с подробными инструкциями по безопасности.
Установка часов Часы данного устройства имеют 24часовую индикацию. 1 Нажмите и удерживайте кнопку выбора. Отобразится дисплей установок. 2 Нажимайте кнопку выбора, пока не появится индикация “CLOCK-ADJ”. 3 Нажмите кнопку (SEEK) +. Замигает индикация часа. 4 Поверните кнопку выбора для установки значения часов и минут. Чтобы переместить индикацию, нажмите кнопку (DSPL). 5 Нажмите кнопку выбора. Установка завершена, и часы начинают отсчет времени. Чтобы отобразить часы, нажмите кнопку (DSPL).
Установка передней панели Прикрепите часть A передней панели к части B устройства, как показано на рисунке, и установите левую сторону на место до щелчка. A B Примечание Не ставьте ничего на внутреннюю поверхность передней панели.
Расположение органов управления и основные операции Основное устройство 12 3 4 5 6 7 8 OFF BLUETOOTH PUSH SELECT / SOURCE EQ SEEK AUX SEEK MODE PTY DIM DSPL ALBM 1 2 REP SHUF 3 4 PAUSE 5 6 AF/TA MEX-BT2500 9 q; qa qs qd qj qf qg qh qk RESET Пульт дистанционного управления RM-X304 1 4 ql OFF SOURCE ATT SEL MODE wa qs ws + wd – qd w; 8 SCRL DSPL 1 2 3 4 5 6 + VOL – wf wg Подробную информацию см. на указанных страницах.
E Слот для дисков Вставка диска (этикеткой вверх). Воспроизведение начнется автоматически. F Окошко дисплея G Входное гнездо AUX 18 Подсоединение переносного аудиоустройства. H Кнопка Z (извлечение) Извлечение диска. I Кнопка (снятия передней панели) 6 J Кнопка PTY (тип программы) 12 Выбор функции PTY в системе RDS.
Компакт-диск Радиоприемник Элементы дисплея Сохранение и прием радиостанций Предупреждение Номер композиции/время с начала воспроизведения, название диска/имя исполнителя, номер альбома*1, название альбома, название дорожки, текстовая информация*2, часы *1 Номер альбома отображается только при смене альбома. *2 При воспроизведении файла MP3 отображается тег ID3, а при воспроизведении файла WMA отображается тег WMA.
Прием радиостанций, сохраненных в памяти 1 Выберите диапазон, затем нажмите номерную кнопку ((1) - (6)). Автоматическая настройка 1 Выберите диапазон, затем нажмите кнопку (SEEK) –/+ для поиска радиостанции. Поиск остановится, когда устройство найдет радиостанцию. Повторяйте процедуру, пока не будет найдена нужная радиостанция.
Сохранение станций RDS с параметрами AF и TA Функция местной привязки (только для Великобритании) Можно выполнить предварительную настройку станций RDS с параметрами AF/TA. При использовании функции BTM сохраняются только станции RDS с теми же параметрами AF/TA. При выполнении предварительной настройки вручную можно сохранить как станции RDS, так и станции без RDS с индивидуальными параметрами AF/TA.
Тип программ NEWS (новости), AFFAIRS (текущие события), INFO (информация), SPORT (спорт), EDUCATE (образование), DRAMA (радиоспектакли), CULTURE (культура), SCIENCE (наука), VARIED (интервью, игры и комедии), POP M (популярная музыка), ROCK M (рокмузыка), EASY M (легкая музыка), LIGHT M (легкая классика), CLASSICS (классика), OTHER M (прочие типы музыки), WEATHER (погода), FINANCE (финансы), CHILDREN (детские программы), SOCIAL A (общественная жизнь), RELIGION (религия), PHONE IN (звонки в прямой эфир), TRA
3 Нажмите и удерживайте кнопку (EQ/BLUETOOTH) до тех пор, пока не заминает индикатор “ ” (около 7 секунд). Устройство перейдет в режим ожидания согласования. Значки Bluetooth В этом устройстве используются следующие значки.
Соединение с данного устройства с сотовым телефоном, с которым в последний раз устанавливалось устройство 1 Убедитесь, что сигнал Bluetooth включен и на этом устройстве, и на сотовом телефоне. 2 Нажимайте кнопку (SOURCE), пока не появится индикация “BT PHONE”. 3 Нажмите кнопку (гарнитура). “ ” мигает во время установления соединения. Затем после установления соединения “ ” продолжает гореть.
Перевод вызовов Чтобы включить или отключить соответствующее устройство (данное устройство или сотовый телефон), проверьте следующее. 1 Нажмите и удерживайте кнопку (гарнитуры) или используйте сотовый телефон. Использование аудиоустройства вместе с данным устройством Если аудиоустройство поддерживает профиль AVRCP (Audio Video Remote Control Profile) технологии Bluetooth, то на данном устройстве можно выполнить следующие операции. (Набор операций зависит от типа аудиоустройства.
Повторите шаги 2 и 3, чтобы настроить кривую эквалайзера. Чтобы восстановить заводскую настройку кривой эквалайзера, нажмите и удерживайте кнопку выбора перед завершением настройки. Через 3 секунды по окончании настройки дисплей возвращается в обычный режим воспроизведения/ приема. Другие функции Изменение настроек звука Настройка баланса и фейдера — BAL/FAD 1 Нажимайте кнопку выбора, пока не появится индикация “BAL” или “FAD”.
AUX-A*1 (AUX Audio) Используется, чтобы установить для дисплея источника AUX значение “AUXA-ON” (z) или “AUX-A-OFF” (стр. 18). A.OFF (Автоматическое выключение) Для автоматического отключения через определенное время, если устройство выключено: “A.OFF-NO” (z), “A.OFF-30S (Секунды),” “A.OFF-30M (Минуты)” или “A.OFF-60M (Минуты)”. DEMO*1 (демонстрация) Используется для установки значения “DEMO-ON” (z) или “DEMO-OFF”. DIM (диммер) Используется для изменения яркости дисплея.
4 Установите обычный уровень громкости для прослушивания на аппарате. 5 Нажимайте кнопку выбора, пока не появится индикация “AUX”, и поверните регулятор громкости, чтобы настроить входной уровень (с шагом от –8 дБ до +18 дБ). Дополнительная информация Меры предосторожности • Если автомобиль был припаркован в солнечном месте, не включайте устройство до тех пор, пока оно не охладится. • При работе устройства автоматически выдвигается антенна с электрическим приводом.
– Невозможность правильного чтения аудиоданных (например, скачки при воспроизведении или отсутствие воспроизведения) из-за того, что ярлык или наклейка деформировались от тепла, что привело к перекосу диска. • Диски нестандартной формы (например, в форме сердца, квадрата, звезды) нельзя воспроизводить на этом устройстве. В противном случае это может привести к повреждению устройства. Не пользуйтесь такими дисками. • Нельзя воспроизводить компакт-диски диаметром 8 см.
• Если диск записан в формате Multi Session, будет распознан формат только первой композиции первой сессии, и будут воспроизводиться композиции только этого формата (все другие форматы воспроизводиться не будут). Форматы имеют следующий приоритет: CD-DA и MP3/WMA. – Если первая композиция записана в формате CD-DA, то будут воспроизводиться композиции первой сессии, имеющие только формат CDDA. – Если первая композиция имеет формат, отличный от CD-DA, будут воспроизводиться композиции формата MP3/WMA.
• Данное устройство поддерживает функции безопасности, удовлетворяющие требованиям стандарта Bluetooth, для обеспечения защищенного соединения, устанавливаемого с помощью технологии беспроводной связи Bluetooth, однако существующие настройки безопасности могут быть недостаточными. Будьте осторожны, используя технологию беспроводной связи Bluetooth для обмена данными. • Мы не принимаем на себя никакой ответственности в случае утечки информации во время сеанса связи Bluetooth.
2 Чистка контактов Возможно, устройство не будет работать надлежащим образом из-за загрязнения контактов, служащих для соединения передней панели с устройством. Во избежание этого отсоедините переднюю панель (стр. 6) и протрите контакты ватным тампоном. Не прикладывайте излишних усилий. В противном случае можно повредить контакты. Извлеките устройство. 1 Вставьте одновременно оба ключа для демонтажа до щелчка. Крючком внутрь. 2 Потяните ключи для демонтажа, чтобы извлечь устройство.
MW/LW Диапазон настройки: MW: 531 – 1602 кГц LW: 153 – 279 кГц Антенное гнездо: разъем внешней антенны Промежуточная частота: 10,7 МГц/450 кГц Чувствительность: MW: 30 мкВ, LW: 40 мкВ Прилагаемые принадлежности: пульт дистанционного управления: RM-X304 детали для установки и подключений (1 комплект) Беспроводная связь Система связи: стандарт Bluetooth версии 2.0 Выход: класс мощности 2 по стандарту Bluetooth (макс.
Из памяти удалены запрограммированные радиостанции и установка времени. Перегорел предохранитель. Слышен шум при переключении положения ключа зажигания. Провода неправильно подсоединены к разъему электропитания вспомогательного оборудования автомобиля. Пропала/не отображается индикация в окошке дисплея. •Для диммера установлено значение “DIMON” (стр. 18). •Дисплей отключится, если нажать и удерживать кнопку (OFF). t Нажмите кнопку (OFF) еще раз и удерживайте ее нажатой, пока дисплей не включится.
RDS После нескольких секунд прослушивания включается функция SEEK. Станция не передает данные TP или передает слишком слабый сигнал. t Отключите TA (стр. 11). Дорожные сообщения не передаются. •Включите функцию TA (стр. 11). •Станция не транслирует дорожных сообщений, хотя и относится к типу TP. t Настройтесь на другую станцию. При включении функции PTY отображается индикация “- - - - - - - -”. •Принимаемая станция не передает данные RDS. •Данные RDS не принимаются. •Станция не указывает тип программы.
Индикация/сообщения об ошибках ERROR •Компакт-диск загрязнен или вставлен нижней стороной вверх. t Почистите или правильно вставьте компакт-диск. •Вставлен пустой диск. •Диск не воспроизводится по какой-либо причине. t Вставьте другой компакт-диск. FAILURE Громкоговорители подключены неправильно. t Для проверки подключения см. руководство по установке. L. SEEK +/– Во время автоматической настройки включен режим местного поиска.
Support site If you have any questions or for the latest support information on this product, visit the web site below: http://support.sony-europe.com Tragen Sie die Seriennummer (SERIAL NO.) in dem reservierten Feld ein. Sie finden diese auf einem Aufkleber, der auf dem Gerätegehäuse angebracht ist. Nehmen Sie den ausgefüllten Geräte-Pass anschließend unbedingt aus der Bedienungsanleitung heraus, falls Sie diese im Fahrzeug aufbewahren möchten.