User's Manual

44
US
Table of
contents
Operation
Search
Settings
Search
Index
Setting Wi-Fi
1 Press the ON/OFF (Power) button.
2 Tap [MENU] t [Main Settings] t [Wi-Fi
Settings], and [Wi-Fi Connection] to show the
mark.
3 Select an access point to connect.
4 Enter the password.
• Network device connections and setting methods differ according to the device.
• The following are needed to connect the camera to a network:
– An Internet service provider (ISP) contract
– ADSL modem or other network device
– Access point or wireless router
– Access point setting information (SSID)
• If you do not know the settings to make, be sure to check with the person who set up the access point,
administrator, or with your service provider.
• When connected to a network, if you do not operate the camera for about xx minutes, the camera may
disconnect from the network automatically to save battery power. In these cases establish the connection
again.
Notes
zWhen using a hotspot (public Wireless LAN access
point)
When you use Wi-Fi to connect to a hotspot at a hotel or airport, tap [MENU] t [Wi-Fi
Settings] t [Hotspot Login], and perform the authentication procedure.
zWhen using a WPS-capable access point
Tap [MENU] t [Wi-Fi Settings] t [WPS].
For details, refer to the instruction manual of the access point.
Continued r