LARGE LENS ADAPTOR HDLA1500 HDLA1505 LARGE VIEWFINDER ADAPTOR HDLA1507 OPERATION MANUAL 1st Edition [English]
WARNING To reduce the risk of fire or electric shock, do not expose this apparatus to rain or moisture. To avoid electrical shock, do not open the cabinet. Refer servicing to qualified personnel only. AVERTISSEMENT Afin de réduire les risques d’incendie ou d’électrocution, ne pas exposer cet appareil à la pluie ou à l’humidité. Afin d’écarter tout risque d’électrocution, garder le coffret fermé. Ne confier l’entretien de l’appareil qu’à un personnel qualifié.
Der Hersteller dieses Produkts ist Sony Corporation, 1-7-1 Konan, Minato-ku, Tokyo, Japan. Der autorisierte Repräsentant für EMV und Produktsicherheit ist Sony Deutschland GmbH, Hedelfinger Strasse 61, 70327 Stuttgart, Deutschland. Bei jeglichen Angelegenheiten in Bezug auf Kundendienst oder Garantie wenden Sie sich bitte an die in den separaten Kundendienst- oder Garantiedokumenten aufgeführten Anschriften.
Table of Contents Foreword................................................................................. 5 Model-Distinction Labels Used in This Manual .........................5 Overview ................................................................................. 5 Principal Differences Among the Models ...................................5 Features........................................................................................5 System Configuration ..........................................
Foreword Model-Distinction Labels Used in This Manual Indications of functions specific to particular models This manual describes three models of the HDLA1500 series: the HDLA1500 and HDLA1505 Large Lens Adaptors, and the HDLA1507 Large Viewfinder Adaptor.
between the camera and the adaptor are achieved via a special connector located on the bottom of the camera without the need for any cable. The special mechanism that requires no adjustment is employed also for connection of a lens. System Configuration Peripherals and related devices for the HDLA1500 series are shown in the figures. Note Independent lens attachment/detachment To make transportation and storage easy, you can attach/ detach the lens only, leaving the camera mounted in the adaptor.
HDLA1505 HDLA1507 HDVF-550/C730W/C950W Viewfinder HD Color Camera 1) + Lens Camera Control Unit 2) HD Color Camera 1) Camera hangers a) (supplied with HDLA1505) CAC-6 Return Video Selector Camera Control Unit 2) Intercom Headset CAC-6 Return Video Selector HDVF-700A HDVF-EL100 Viewfinder Intercom Headset Zoom Lens (for studio use) HDLA1507 HDLA1505 V-wedge shoe (supplied with the tripod) V-wedge shoe (supplied with the tripod) BKP-7911 Script Holder BKP-7911 Script Holder Tripod Tripod a) Part
Precautions Do not subject to severe shocks Damage to the case or internal components may result. Operation and storage environment Store in a level place with air conditioning.
Locations and Functions of Parts Side Panel HDLA1500 b Camera handle catch Viewfinder table (page 18) a Tally lamp Viewfinder table lock lever (opposite side) Viewfinder table release knob Lens mount (front) (page 20) Rear panel lock release lever c Holder for camera number plate e DC OUT connector Lens lock and lens lock holding knob (page 20) f Accessory bracket d Cable clamp g DC OUT connector HDLA1505 b Camera handle catch a Tally lamp Lens mount (front) (page 20) c Holder for camera number
HDLA1507 Viewfinder table (page 18) Viewfinder table lock lever (opposite side) Viewfinder table release knob c Holder for camera number plate Rear panel lock release lever e DC OUT connector d Cable clamp f Accessory bracket g DC OUT connector a Tally lamp [1500][1505] The lamp lights when a red tally signal is supplied to the mounted camera. To display the camera number, attach the supplied number plate for up tally or select the desired number on the menu of the camera.
Rear Panel HDLA1500 HDLA1507 Control panel (page 12) Control panel (page 12) POWER POWER G R R G RET 1 RET 2 2 3 4 2 3 4 RET 1 1 RET 2 2 3 4 2 3 4 1 1 1 VF DTL VF DTL CURSOR 1 2 B B OFF CURSOR 1 ON 2 OFF 3 ON CALL CALL 3 DC IN DC IN b DC IN connector a Memo clip a Memo clip b DC IN connector c Cable hanger c Cable hanger HDLA1505 a Memo clip To hold scratch paper, etc. Open it to access the control panel.
Control Panel a POWER indicator POWER b Video signal select buttons c RET 1 button and selector knob R G RET 1 RET 2 2 3 2 4 1 3 B m Back tally lamp n RET 2 button and selector knob o VF DTL switch 4 1 VF DTL CURSOR d CURSOR 1, 2, and 3 buttons e CURSOR STORE button 1 OFF 2 p CALL button ON 3 q VF DTL control CALL r VF SCAN switch STORE MIX VF VF SCAN ON 16:9 s MIX VF switch ON f CURSOR ON button OFF H-POSI MARKER V-POSI ON g H-POSI control 4:3 t SCREEN SIZE MARKE
Note When one of the CURSOR buttons is lit, the H-POSI, VPOSI, WIDTH, and HEIGHT buttons do not function. e CURSOR STORE button Press this button to store the size and position of the box cursor in memory. Note n RET 2 button and selector knob You may select from among the four return signals (1 to 4) from the CCU using the selector knob. By pressing the button, you can view the return video signal selected by the selector knob, on the viewfinder screen.
t SCREEN SIZE MARKER switch Used to control the display of the screen size marker as follows: ON ( ): Areas outside the specified ratio area will be darkened. ON ( ): The screen size marker (white lines) will be displayed. OFF: The screen size marker will not be displayed. u MARKER switch Used to control the display of the marker as follows: ON: A marker selected from the menu will be displayed on the viewfinder screen. OFF: The marker will not be displayed.
Bottom of the adaptor [1500][1507] Feet Feet Remove the blind bush from the screw hole on the side panel. Cable hanger V-wedge shoe When attaching the V-wedge shoe, taking the total weight of the adaptor, camera, studio lens and viewfinder, and the size of the pan and tilt head of the tripod into consideration, choose a position such that the unit will be mounted stably on the tripod. Attach the stopper using the supplied screw.
2 Check that the cover of the SHUTTER switch of the camera is closed. [1500][1505] 3 Fix the viewfinder base of the camera in the position closest to the handle. 3 Viewfinder base Camera lock lever For the HDLA1500, proceed to step 2. For the HDLA1505, proceed to step 3. 2 Pull the viewfinder table lock lever 1 toward the rear panel, then pull the release knob 2 and slide the viewfinder table in the direction of the arrow 3.
Caution [1500][1505] Check that the rear panel is locked firmly. To remove the camera While the figures of the adaptors in the following steps show the states where the studio lens and the large viewfinder have been already removed, the camera can also be removed with the lens and viewfinder attached to the adaptor. For the HDLA1505, start from step 2. For the HDLA1507 Place the camera inside and slide it forward until it locks in place.
[1500][1505] (The figure shows HDLA1500.) Camera lock lever (The figure shows HDLA1500.) Caution Check that the rear panel is locked firmly. Attaching a Large Viewfinder (HDLA1500/1507) For the HDLA1507 While holding the camera lock lever on the front panel upward, and pull the camera rearward until it stops then remove it. Attach a large viewfinder to the panning base mounting plate of the adaptor.
Example: Attaching a 7-type or 9-type viewfinder For details on the attaching procedure, refer to the instruction manual furnished with the viewfinder. Note Before attaching the viewfinder to the adaptor, check to be sure that the VF connector on the panning base mounting plate faces in the direction 90 degrees clockwise from the rear panel of the adaptor as shown in the figure for step 1 below. 1 3 Turn the viewfinder counterclockwise.
You cannot detach the viewfinder from the camera unless it is in this position. [1500] Handle catch 2 While pushing in on the lock release tabs, grip the viewfinder handle and lift the viewfinder to remove it from the adaptor. Attaching a Large Studio Lens (HDLA1500/1505) 3 Notes While pulling the release knob 1 on the left side to release the viewfinder table, slide the table as 2 to an appropriate position. Then push the lock lever 3 toward the front to lock the viewfinder table in place.
3 Push the rear face of the lens onto the front face of the lens adaptor then turn the lens lock holding knob clockwise. Make sure that the lens lock stands back and holds the tonguelike protrusion at the lens bottom. If not, turn the lens lock holding knob counterclockwise to perform this step again. Note Some tripods cannot be attached unless the feet and cable hanger are removed from the adaptor. Remove the feet and hanger to use such a tripod (see page 14).
Specifications Dimensions HDLA1500 Unit: mm (inches) 539 (21 1/4) Operation manual (1) Camera hangers (2) (HDLA1500/1505) Angle-adjusting plates (2) Cable clamps (2) Number plates for side panel (2 sets) Number plates for up-tally lamp (1 set) (HDLA1500/1505) Stopper (1) (HDLA1500/1507) Fixing screw for stopper (1) (HDLA1500/1507) Optional accessories HD Electronic Viewfinder HDVF-700A (7-type, monochrome) HDVF-EL100 (11-type, color) BKP-7911 Script Holder 318 (12 5/8) HDLA1505 Unit: mm (inches) 69 (
HDLA1507 Unit: mm (inches) 90 (3 5/8) 407 (16 1/8) 531 (21) 12 (1/2) 3 236 (9 /8) 200 (7 7/8) 318 (12 5/8) 336 (13 1/4) 292 (11 1/2) 200 (7 7/8) 539 (21 1/4) Design and specifications are subject to change without notice. Note Always verify that the unit is operating properly before use.
Specifications
The material contained in this manual consists of information that is the property of Sony Corporation and is intended solely for use by the purchasers of the equipment described in this manual. Sony Corporation expressly prohibits the duplication of any portion of this manual or the use thereof for any purpose other than the operation or maintenance of the equipment described in this manual without the express written permission of Sony Corporation.
Sony Corporation HDLA1500 (JN/CE) HDLA1505 (JN/CE) HDLA1507 (JN/CE) 4-145-591-01(1) Printed in Japan 2009.