SWITCHER PROCESSOR PACK DVS-9000-C DVS9000SF-C PRODUCTION SWITCHER PROCESSOR DVS-9000 DVS-9000SF BKDS-9160 BKDS-9470 BKDS-9161 BKDS-9162 BKDS-9210 MKS-8110SD MKS-8111SD HK-PSU04 OPERATION MANUAL 1st Edition [English]
WARNING To prevent fire or shock hazard, do not expose the unit to rain or moisture. To avoid electrical shock, do not open the cabinet. Refer servicing to qualified personnel only. THIS APPARATUS MUST BE EARTHED. For the customers in the USA This equipment has been tested and found to comply with the limits for a Class A digital device, pursuant to Part 15 of the FCC Rules.
AVERTISSEMENT Afin d’éviter tout risque d’incendie ou d’électrocution, ne pas exposer cet appareil à la pluie ou à l’humidité. Afin d’écarter tout risque d’électrocution, garder le coffret fermé. Ne confier l’entretien de l’appareil qu’à un personnel qualifié. CET APPAREIL DOIT ÊTRE RELIÉ À LA TERRE.
Table of Contents Overview ............................................................................... 5 Features...................................................................................... 5 Overview of the DVS-9000 Components.................................. 5 Location and Function of Parts........................................... 7 DVS-9000 Front Panel ............................................................. 7 DVS-9000 Rear Panel......................................................
Overview The DVS-9000-C or DVS9000SF-C Switcher Processor Pack is a high-performance, multi-function production switcher processor for use in an SDTV-format DVS-9000 video switcher system. It has a wide range of application, being usable in studios and the ENG and OB vans of largescale live production systems as well as in postproduction editing systems. Powerful frame memory functions Up to 222 SDTV still frames can be stored in frame memory, and up to eight frames can be called up for use simultaneously.
DVS-9000SF Production Switcher Processor DVS-9000SF Production Switcher Processor main unit. This is the main chassis unit of the DVS-9000SF Production Switcher Processor (size EIA 4RU). It is supplied with boards for 1 M/E banks, 17 inputs, and 12 outputs as standard equipment. The following options may be installed to configure different systems.
Location and Function of Parts DVS-9000 Front Panel POWER A POWER B Power A, B, C, D switches and status indicator POWER C POWER D POWER A, B, C and D switches and status indicators The POWER switches turn the unit on and off. The unit is powered on when the POWER switches are on the “?” side, and powered off when the POWER switches are on the “a” side. The status indicators light in green when the unit is powered on.
DVS-9000 Rear Panel 1SWITCHER REMOTE 1 to 4 connectors 2SWITCHER CTRL connector 3 EXT connector 4REF OUT connector 5SWITCHER DATA connector 6REF IN connectors 7DME EXT IN 1 to 4 connectors qaDME REMOTE connector qsDME GPI connector 8DME DATA connector 9DME CTRL connector qdSWITCHER GPI connector 0 DME MONI OUT 1 to 4 connectors qfTERMINAL connector 1 1 2 3 4 1 2 3 4 2 EXT IN MONI OUT - AC IN A - AC IN B - AC IN C - AC IN D 3 DATA CTRL DATA CTRL REMOTE GPI REMOTE 2 REMOTE 1 G
a SWITCHER REMOTE 1 to 4 connectors (D-sub 9-pin, RS-422A) Used to control the DVS-9000 AUX bus from external devices, and to operate the DVS-9000 from editing control systems such as the BVE-9100. Specify the types of connected devices on the center control panel. b SWITCHER CTRL (Switcher Control) connector (RJ-45) Connect to an Ethernet switch*. The DVS-9000 System is connected in the same way to the Ethernet switch to form a network for exchange of signals between the devices.
m SWITCHER GPI (Switcher General Purpose Interface) connector (D-sub 25-pin) Connect to external devices for input and output of trigger signals. Up to eight inputs and eight outputs are possible, with input and output conditions set on the center control panel. n TERMINAL connector (D-sub 9-pin, RS-232C) This connetor is used for factory adjustments. o U (signal ground) terminal Connect to the system ground.
DVS-9000SF Front Panel POWER A Power A, B switches and status indicator POWER B Power A, B switches and status indicators The POWER switches turn the unit on and off. The unit is powered on when the POWER switches are on the “?” side, and powered off when the POWER switches are on the “a” side. The status indicators light in green when the unit is powered on. Depending on the system’s configuration when shipped, there may be no optional HK-PSU04 Power Supply Unit installed.
DVS-9000SF Rear Panel 1EXT connector 2REF OUT connector 3SWITCHER CTRL connector 4SWITCHER DATA connector 5REF IN connectors 0DME REMOTE connector 6DME EXT IN 1 to 4 connectors qaDME GPI connector 7DME DATA connector qsSWITCHER GPI connector 8DME CTRL connector qdSWITCHER REMOTE 1 to 4 connectors 9 DME MONI OUT 1 to 4 connectors 1 2 3 4 1 2 3 qfTERMINAL connector 4 1 EXT IN MONI OUT 2 DATA CTRL DATA CTRL REMOTE GPI REMOTE 2 REMOTE 1 GPI REMOTE 4 REMOTE 3 TERMINAL 3 REF IN - A
d SWITCHER DATA connector (RJ-45) Connect to an Ethernet switch. The DVS-9000 System is connected in the same way to the Ethernet switch to form a network for exchange of signals between the devices. This network is used primarily for exchange of various types of data (key frame effects, snapshots, etc.) and still pictures of frame memory. Caution When using a LAN cable: For safety, do not connect to a connector for peripheral device wiring that might have excessive voltage.
r OUTPUTS 1 to 24 connectors (BNC type) (BKDS-9162) These connectors output serial digital signals. They can be freely assigned to program output, preview output, AUX output and so on. There are two BNC connectors for the lower numbers on each slot (1 to 4, 13 to 16) and one BNC connector for the upper numbers (5 to 12, 17 to 24) (the BKDS-9162 is required 13 to 24). Make output assignments using the center control panel of the DVS-9000 system.
Example System Configuration DVS-9000 System Configuration The figure below shows the configuration of a DVS-9000 system. DME REMOTE DME CTRL SWITCHER DATA BVE-9100 Editing Control System Ethernet switch a) Ethernet switch a) DME DATA The same type of configuration is possible with a DVS9000SF system.
Flow of Video Signals The figure below shows the flow of video signals in a DVS-9000 system. Camera, VTR, routing switcher The flow of signals is the same in a DVS-9000SF system.
Power Supply Unit Status Indicators The power supply unit status indicators show the status of the power supply unit during operation and when the unit is powered on. Whenever a power error is detected, it is reflected immediately by the indicator.
Specifications The following specifications show the reference performance for this unit and individual option boards/ modules. Design and specifications are subject to change without notice.
Analog sync Signal level ±300 mV ±10% Phase variation range −90H to +90H DVS-9000SF Production Switcher Processor General Power requirements 100 to 240 V AC, 50/60 Hz Current consumption 100 V: 5.4 A, 240 V: 2.
Mass CN board: 274×94 mm (107/8×33/4 inches) (using 2 boards) Approx. 2 kg (4 lb 6 oz) Output Outputs 24 (BNC type), 1 to 4 and 13 to 16, each with 2 outputs Signal format SMPTE259M-C Signal level 0.8 Vp-p ±10% Signal transfer rate 270 Mbps Accessories supplied Operation and Installation Guide (1) (supplied only when product is purchased separately) BKDS-9161 Monitor Output Board General Power requirements 12 V DC Power consumption Max.
Relay contact outputs: 4 (30V AC/DC, 0.1A) Open collector outputs: 4 MKS-8111SD Additional 12 Input Board Input General Inputs 4 (BNC type) Signal format SMPTE259M-C Signal level 0.8 V p-p ±10% Signal tansfer rate 270 Mbps Return loss 15 dB Cable length 200 m (5C-2V cable, BELDEN8281 or equivalent) Power requirements 12 V DC Power consumption Max. 10 W Dimensions (w/h) 274×94 mm (107/8×33/4 inches) Mass Approx.
Specifications
The material contained in this manual consists of information that is the property of Sony Corporation and is intended solely for use by the purchasers of the equipment described in this manual. Sony Corporation expressly prohibits the duplication of any portion of this manual or the use thereof for any purpose other than the operation or maintenance of the equipment described in this manual without the express written permission of Sony Corporation.
Sony Corporation B & P Company DVS-9000 Printed in Japan (WW) 3-690-433-01 (1) 2002.07.