© 2006 Sony Corporation Printed in Malaysia 2-695-812-11 (1) Quick Start Guide NW-E002F / E003F / E005F / E002 / E003 / E005
Table of Contents Introduction............................................................ 6 Getting Started ...................................................... 8 Owner’s Record The model and serial numbers are located on the back of the player. Record them in the space provided below. Refer to these numbers in the spaces whenever you call upon your Sony dealer regarding this product. Model No. __________________________ Serial No.
WARNING To reduce the risk of fire or electric shock, do not expose this apparatus to rain or moisture. Do not install the appliance in a confined space, such as a bookcase or built-in cabinet. To reduce the risk of fire, do not cover the ventilation of the apparatus with newspapers, tablecloths, curtains, etc. And don’t place lighted candles on the apparatus. To reduce the risk of fire or electric shock, do not place objects filled with liquids, such as vases, on the apparatus.
Introduction Thank you for purchasing the NW-E002F/E003F/E005F/E002/E003/E005. Be sure to install the “SonicStage” software from the supplied CD-ROM in your computer. To begin using the player, first import music songs into your computer using the SonicStage software, and then transfer them to the player. After transferring the music songs to the player, you can enjoy them wherever you go.
Getting Started Supplied Items Check the following items. Headphones (1) CD-ROM* (1) - SonicStage software - Operation Guide (PDF file) Quick Start Guide (this manual) (1) * Do not attempt to play this CD-ROM in an audio CD player. 8 Installing SonicStage Install SonicStage according to the following instructions. If SonicStage is already installed, it will be overwritten. All functions and audio data from the previous installation will be preserved on the new installation.
Getting Started (continued) – CD-ROM drive (supporting Digital Music CD playback capabilities using WDM) To create original CDs or to back up audio CDs, a CD-R/RW drive is required. – Sound board – USB port (Hi speed USB is recommended) • Internet connection is required to use the CD Data Base (CDDB). • To use Electronic Music Distribution (EMD), you need Internet connection, and Internet Explorer 5.5 or later needs to be installed.
Importing Music Import audio data to your computer using the SonicStage. The methods of importing tracks of CD are described here. 3 Place the pointer over [Music Source] at the top of the screen and click [Import a CD]. 4 Importing audio data starts. The screen for importing is displayed, and the song list of the CD appears. Click at the right of the screen. Hint • SonicStage also offers the following additional features. For details, refer to SonicStage Help.
Transferring Music Connect the player to your computer and transfer the audio data to the player. 2 3 4 5 Connect the USB connector of the player to your computer. Place the pointer over [Transfer] and select [ATRAC Audio Device] from the transfer destination list. Select an audio file(s) or album you want to transfer. Click to start transferring. To stop transferring, click . Notes • Do not disconnect the player from your computer while data is being transferred.
Playing Music Basic Operation – Parts and Controls Front A B Headphones HOME C / button Selects a song, album, artist, or menu item. You can also skip to the beginning of the song/album/artist, fast-rewind or fastforward as follows. • Pressing the () button: Skips to the beginning of the current (or next) song/ album/artist. • Pressing and holding the () button during playback and releasing it at the desired point: Fast-rewinds (or fastforwards) the current (or next) song.
Playing Music (continued) Rear F Display G K HOLD HOLD switch Strap hole 18 J To remove the USB cap Remove the USB cap as shown below. USB connector RESET button Resets the player. For details, refer to Operation Guide. This is used to attach a strap. VOL +/– button USB cap Adjusts the volume. Remove the USB cap and connect the USB connector to a USB port on your computer directly.
Listening to FM Tuner (NW-E002F/E003F/E005F only) / button /HOME button HOME button and hold the 1 Press appears. /HOME button until the HOME screen the / button to select 2 Press button to confirm. Hint In Preset Tuning, you cannot select broadcast stations if no preset stations are entered. Preset receivable broadcast stations in your area automatically by selecting “FM Auto Preset” in the Setting menu.