Owner's Manual

Table Of Contents

The NFC function is turned on as a default. If you want to turn off the NFC function, tap the menu items in the following

order to remove the check mark.

– [Settings] – [NFC] ([Bluetooth]).

Hint

Take the following measures if the connection is poor.

Move the smartphone over the mark on the Walkman (

If the Walkman or the smartphone is inside a case, take it out of the case.

Make sure that the NFC function is on. Check if the N mark appears in the information area. If not, exit the Bluetooth Receiver

function, and then tap the menu items in the following order to turn on the NFC function.

– [Settings] – [NFC] ([Bluetooth]).

Note

Turn on the screen of the Walkman before you make the connection. If the screen is turned off, you cannot connect the

smartphone by touching the smartphone to the Walkman (NFC).

The battery life becomes considerably shorter when the Bluetooth Receiver function is active.

You cannot use the Bluetooth Receiver function while any of the following functions is active. Turn off the function and switch to

the Bluetooth Receiver function.

USB-DAC function