PCG-GRT Series Hard Disk Drive Replacement Instructions

PCG-GRT Series Hard Disk Drive
Replacement Instructions
P/N T99860135 Rev. B 2/2
Step 4. Remove the HDD Bay.
Using the enclosed magnetic
screwdriver, remove the two (2)
screws securing the hard disk drive
bay.
Step 5. Release the HDD Bay.
Slide out the HDD Bay as shown.
Some force may be required to
unlock the HDD Bay.
Step 6. Gently pull the original HDD
Bay away from the computer as
shown.
Step 7. Install New HDD Bay.
Hold the new HDD Bay by the edges
and align it with the opening. With an
even force slide in the new HDD
Bay.
Step 8. Reinstall the two (2) screws
previously removed.
Reinstall the Battery Pack and
reconnect the AC Adapter.
Step 9. Power on your computer
and continue with the recovery
process by following the
instructions described on the back
of the recovery disk’s case.
Return the old HDD Bay to Sony
following the included shipping
instructions.