User's Manual

118
nN
Precautions
Handling the Built-in MOTION EYE Camera
❑ Do not touch the lens protection cover of the built-in MOTION EYE camera, as it may cause scratches on the cover and
such scratches will appear on the captured images.
❑ Do not let the direct sunlight get into the lens of the built-in MOTION EYE camera regardless of your computer's power
state, as it may cause the camera to malfunction.
❑ The built-in MOTION EYE camera is disabled while videos or still images are imported from an i.LINK-compatible device
connected to the i.LINK port.
❑ Clean the lens protection cover of the built-in MOTION EYE camera with a blower brush or a soft brush. If the cover is
extremely dirty, wipe it off with a soft dry cloth. Do not rub the cover, as it is sensitive to pressure.
Handling Floppy Disks
❑ Do not open the shutter manually and touch the internal components of the floppy disk.
❑ Keep floppy disks away from magnets.
❑ Keep floppy disks away from direct sunlight and other sources of heat.
❑ Keep floppy disks away from any liquid. Do not let them get wet. When you are not using your floppy disk, always remove
it from the floppy disk drive and put it in a storage case.
❑ If the floppy disk comes with a label, make sure that the label is properly affixed. If the edge of the label is curled up, the
label may stick to the inside of the floppy disk drive and cause a malfunction or damage your floppy disk.
Handling Discs
❑ Do not touch the surface of the disc.
❑ Fingerprints and dust on the surface of a disc may cause read errors. Always hold the disc by its edges and central hole,
as shown below: