User's Manual
Table Of Contents
- Before Use
- Getting Started
- Using Your VAIO Computer
- Using the Keyboard
- Using the Pointing Device
- Using Special-function Buttons
- Using the Built-in MOTION EYE Camera
- Using the Memory Stick
- Using the SD Memory Card
- Using the Internet
- Using the Network (LAN)
- Using the Wireless LAN (WLAN)
- Using the Bluetooth Function
- Using the Bluetooth® Function
- Using the Global Positioning System (GPS) Function
- Using Peripheral Devices
- Customizing Your VAIO Computer
- Precautions
- Troubleshooting
- Support Options
- Trademarks
93
nN
Customizing Your VAIO Computer
To add the power-on password (machine password)
1 Turn on the computer.
2 Press the F2 key when the VAIO logo appears.
The BIOS setup screen appears. If not, restart the computer and press the F2 key several times when the VAIO logo
appears.
3 Press the < or , key to select Security to display the Security tab, select Set Machine Password, and then press the
Enter key.
4 On the password entry screen, enter the password twice and press the Enter key.
The password can be up to 32 alphanumeric characters (including spaces) long.
5 Select Password when Power On under Security and press the Enter key.
6 Change the setting from Disabled to Enabled.
7 Press the < or , key to select Exit, select Exit Setup, and then press the Enter key.
At the confirmation prompt, press the Enter key.
To add the power-on password (user password)
!
Make sure you set the machine password before setting the user password.
1 Turn on the computer.
2 Press the F2 key when the VAIO logo appears.
The BIOS setup screen appears. If not, restart the computer and press the F2 key several times when the VAIO logo
appears.
3 Enter the machine password and press the Enter key.
4 Press the < or , key to select Security to display the Security tab, select Set User Password, and then press the
Enter key.