User Manual
Table Of Contents
- Before Use
- Getting Started
- Using Your VAIO Computer
- Using the Keyboard
- Using the Touch Pad
- Using Special-function Buttons
- Using the Quick Web Access Function
- Using the Built-in Camera
- Using the Optical Disc Drive
- Using "Memory Stick"
- Using Other Modules / Memory Cards
- Using the Internet
- Using the Network (LAN)
- Using the Wireless LAN
- Using the Wireless WAN
- Using the International Roaming Service
- Using the BLUETOOTH Function
- Using Fingerprint Authentication
- Using the TPM
- Using Peripheral Devices
- Customizing Your VAIO Computer
- Upgrading Your VAIO Computer
- Precautions
- Troubleshooting
- Trademarks
- Notice
49
nN
Using Your VAIO Computer >
Using the Optical Disc Drive
3 Place a disc in the middle of the drive tray with the label side facing upward and gently push it down until the disc clicks
into place.
!
Do not exert pressure on the drive tray. Be sure to hold the bottom of the drive tray when placing/removing a disc onto/from the tray.
4 Close the drive tray by pushing it in gently.
!
Do not remove the optical disc while your computer is in a power saving mode (Sleep or Hibernate). Be sure to bring the computer back into Normal
mode before removing the disc.
You cannot use optical discs if you disable the optical disc drive in the BIOS setup screen. To enable the drive, follow the steps in Disabling Built-in
Devices (page 133).