User Manual
Table Of Contents
- Before Use
- Getting Started
- Using Your VAIO Computer
- Using the Keyboard
- Using the Touch Pad
- Using Special-function Buttons
- Using the Quick Web Access Function
- Using the Built-in Camera
- Using the Optical Disc Drive
- Using "Memory Stick"
- Using Other Modules / Memory Cards
- Using the Internet
- Using the Network (LAN)
- Using the Wireless LAN
- Using the Wireless WAN
- Using the International Roaming Service
- Using the BLUETOOTH Function
- Using Fingerprint Authentication
- Using the TPM
- Using Peripheral Devices
- Customizing Your VAIO Computer
- Upgrading Your VAIO Computer
- Precautions
- Troubleshooting
- Trademarks
- Notice
127
nN
Customizing Your VAIO Computer >
Setting the Password
To change or remove the power-on password (user password)
1 Turn on the computer and press the F2 key repeatedly until the VAIO logo disappears.
The BIOS setup screen appears. If the screen does not appear, restart the computer and try again.
2 Enter the user password and press the Enter key.
3 Press the < or , key to select Security to display the Security tab, select Set User Password, and then press the
Enter key.
4 On the password entry screen, enter the current password once and a new password twice, and then press the Enter key.
To remove the password, leave the Enter New Password and Confirm New Password fields blank and press the Enter
key.
5 Press the < or , key to select Exit, select Exit Setup, and then press the Enter key.
At the confirmation prompt, press the Enter key.