User Manual
Table Of Contents
- Before Use
- Getting Started
- Using Your VAIO Computer
- Using the Keyboard
- Using the Touch Pad
- Using Special-function Buttons
- Using the Quick Web Access Function
- Using the Built-in Camera
- Using the Optical Disc Drive
- Using "Memory Stick"
- Using Other Modules / Memory Cards
- Using the Internet
- Using the Network (LAN)
- Using the Wireless LAN
- Using the Wireless WAN
- Using the International Roaming Service
- Using the BLUETOOTH Function
- Using Fingerprint Authentication
- Using the TPM
- Using Peripheral Devices
- Customizing Your VAIO Computer
- Upgrading Your VAIO Computer
- Precautions
- Troubleshooting
- Trademarks
- Notice
141
nN
Upgrading Your VAIO Computer >
Adding and Removing Memory
8 Slide the memory module into the memory module slot and push it in until it clicks into place.
!
Do not touch any components on the motherboard other than the memory module.
Be careful not to touch the wires and the projections inside the bottom cover.
Be sure to insert the connector edge of the memory module into the slot while aligning the notch on the module with the small projection in the open
slot. Do not force the memory module into the slot in a wrong orientation, as it may cause damage to the slot and the module.
9 Replace the cover and the removed screws and then tighten the screws.
10 Turn on the computer.