Operating Instructions

23
Getting Started
Setting the clock
Recorded audio files are named using the
date and time of the clock. By setting the clock
before recording, recordings will be saved with
the correct date and time.
Setting the clock just after
purchasing
When the linear PCM recorder is turned
on before the clock has been set, “Set
Date&Time?” appears on the display.
After a while, the message disappears
automatically and a confirmation message
appears.
1
Press  and  to select “Yes” and
press the
 button.
The “Date&Time” window is displayed.
2
Press  and  to set the year (y), and
then press the
 button to fix the
value.
You can move the cursor to the year,
month, day, hour and minute by pressing
 and .
3
Repeat step 2 to set the month (m),
day (d), hour, and minute. Press the
 button after setting the minute to
start the clock.
“Setting completed” is displayed and the
clock reflects the setting.
To reset the clock
1 While the recorder is stopped, press and
hold the HOME/BACK button for 1 second
or more.
The HOME menu is displayed.
2 Press  and  to select “ Settings“ and
then press the
 button.
The Settings menu is displayed.
3 Press  and  to select “Common
Settings,” and then press the
 button.
4 Press
 and  to select “Date&Time,” and
then press the
 button.
The “Date&Time” display appears.
5 While the current time setting is being
selected, press the
 button.
6 Press
 and  to set year (y), and then
press the
 button.
7 Repeat this procedure to set the month
(m), day (d), hours and minutes in this
order.
You can move the cursor to the year,
month, day, hour and minute by pressing
 and .
When you set the minute and press the

button, “Setting completed” is displayed
and the clock reflects the setting.
Notes
 The time is displayed either in “12-Hour” with “AM”
or “PM,” or in “24-Hour,” depending on the “Time
Display” setting in the menu. The default setting
differs depending on the country or region you
purchased the linear PCM recorder.
 If you leave the recorder for several weeks with no
batteries inserted, the date and time change to the
default settings. In this case, reset the clock.