Operating Instructions

57
Editing
Tip
 The divided files are named as follows:
 “Divide at This Position”: The divided files will be
suffixed with a sequential number (“_1,” “_2”).
 “At All Track Marks”: A suffix made up of a
sequential number (“_01,” “_02”) is added to each
of the divided files.
Notes
 You cannot divide a file if:
 The file is recorded by a device other than the
linear PCM recorder.
 The file is protected.
 You try to divide the file at a point less than 0.5
seconds from the beginning or the end of the file.
 The total number of recorded files reaches the
maximum number of recordable files.
 The new file name exceeds the maximum number
of characters.
 The file name after division is identical to an
existing file in the folder.
 There is a track mark less than 0.5 second from
the division position (only when dividing at all of
the track mark positions).
 If there is a track mark within 0.5 seconds of the
dividing position (only when you are dividing a
file at the current position), the division will be
proceeded by erasing the track mark.