User Manual

33
Recording
When rotating both capsules of
the microphones to 120˚ to face
outside (Wide stereo position)
The microphone on the right records sound
from the right; the microphone on the left
records sound from the left.
You can obtain dynamic stereo sound
recording. This position is recommended for
recording a remote sound source such as a
chorus, an orchestra, or other performance of
a large number of people.
Records
sound from
the right.
Records
sound from
the left.
To switch the microphone input
sensitivity
Use the MIC ATT switch.
Usually set it to the “0” position. When
recording loud sounds, set it to the “20”
position.
We recommend a trial recording
The recording environment, including the size
of the room and the speaker’s voice level,
is different for each recording. The desired
sound quality also differs depending on the
subject of the recording. A trial recording
is very effective to prevent failure of an
important recording and create an optimum
recording environment for your recording
purposes.
Continued on the next page