User Manual
37
Recording
8
Press PAUSE (or ) button.
The standby for recording is released, and
recording starts.
lights on the display
while recording is in progress.
To pause recording
Press the PAUSE button during recording.
and the counter display flash. Press the
button again to restart recording.
The linear PCM recorder does not start
recording again automatically. Be sure to press
the
PAUSE button again to restart recording.
To stop recording
Press the STOP button.
Remaining recordable time display
When the remaining recordable time is
less than 10 minutes during recording, the
remaining recordable time flashes on the
display.
When the remaining time runs out, “Memory
Full” appears and recording stops.
Notes
While is lit on the display, do not remove the
batteries, an AC adaptor or a memory card. Doing so
may damage the data.
If the linear PCM recorder remains in stop mode for
about 10 minutes or longer, the linear PCM recorder
will enter low-power consumption mode
automatically. Power, however, is consumed during
the low-power mode. When you are not going to
use the linear PCM recorder, please turn off the
power.
Noise may be recorded if an object, such as your
finger, etc., accidentally rubs or scratches the linear
PCM recorder during recording.
Do not connect the USB cable to the linear PCM
recorder during recording. Doing so stops recording
automatically (because connection with a computer
has priority).
If the size of a file exceeds 1GB for an MP3 file and
2GB for an LPCM/DSD file during recording, a new
file is created automatically and the excess portion
will be recorded as a new file.