User Manual

46
Playing a file (continued)
Operations during playback
To
Operation
Stop playback
Press the
 STOP button.
Pause playback
Press the
 PAUSE button.
and the counter display
flash. To resume play after
pausing, press the
 PAUSE
button again.
Fast forward
(Cue)
Press and hold the

button.*
Fast reverse
(Review)
Press and hold the

button.*
Go back to the
beginning of the
current file
Press the
 button once.
Go back to
previous files
Press the
 button
repeatedly.**
Go to the
beginning of the
next file
Press the
 button once.**
Go to the
beginning of
subsequent files
Press the
 button
repeatedly.
* If you press and hold the button, the linear PCM
recorder moves forward or backward slowly at first,
and then at a gradually higher speed.
** These operations are for when “EASY SEARCH” in
the OPTION menu is set to “OFF.”
Displaying the current file information
In play or playback stop mode, display the
OPTION menu and select “File Information.”
You can display various information on the
current file including the recording date, file
size, title, artist information, record mode, or
LCF/LIMITER settings.
You can scroll the display by pressing
 and .
When files are played to the end of the
last file
 When you play or fast play to the end of the
last file, “FILE END” lights up for 5 seconds.
When “FILE END” lights off, the linear PCM
recorder will stop at the beginning of the
last file.
 If you press and hold the  button while
“FILE END” is lit, the files are played rapidly,
and normal playback will start at the point
where you release the button.
 If the last file is long and you wish to start
playback at a later part of the file, press and
hold the
 button to go to the end of the
file and then press the
 button while
“FILE END” is lit to go back to the desired
point.
 For files other than the last one, go to the
beginning of the next file and then fast-
rewind to the desired point during playback.
Notes
 During playback, do not remove the batteries or AC
adaptor. Doing so may cause noise in audio output
from the LINE OUT (OPT) jack and
 (headphones)
jack.
 To jump to the recording function quickly, press the
REC button or select “Go to REC” from the OPTION
menu.
 Do not set the volume to an excessively high
level. The volume is set at a higher level than a
conventional device due to the high output level of
headphones. Please set the volume to a moderate
level.