User Manual

78
Symptom Cause/Solution
The linear PCM recorder
is not recognized by your
computer. A folder/file
cannot be transferred
from your computer.
 Disconnect the linear PCM recorder from your computer and reconnect it.
 Operation is not guaranteed if you use any system environment other than
those that the linear PCM recorder supports.
 Depending on the USB port position, the linear PCM recorder may not be
recognized. If this happens, try another port.
The file transferred from
your computer is not
displayed or cannot be
played back.
 The linear PCM recorder can recognize up to 8 levels of folders.
 The files other than those the linear PCM recorder supports may not be
displayed. Check the compatible file formats.
A character in a folder or
file name is displayed in
unreadable characters.
 The linear PCM recorder cannot support or display some special characters
and symbols that are entered on a computer using Windows Explorer or the
Mac Finder.
The “Please wait” display
does not disappear.
 If the linear PCM recorder is required to process a large amount of data, the
message may be displayed for an extended period of time. This is not a
malfunction of the linear PCM recorder. Wait until the message disappears.
In this case, do not remove the batteries or an AC adaptor (not supplied).
You cannot record files
up to the maximum
recording time noted on
page 88.
 If there are other formatted data (for example, images) saved in the
memory, you cannot record files up to the maximum.
 A memory card requires a minimum amount of memory, even when
recording very short files. As a result, the actual total recording time of the
memory card may be shorter than the maximum recording time of the
linear PCM recorder.
 The maximum recording time indicated on page 88 is estimated. It varies
depending on the number of files.
 Due to the limitations of the recording system, the sum of the total
recorded time in the counter (elapsed time) and the remaining recording
time may be shorter than the maximum recording time of the linear PCM
recorder.
 Even when “Memory Full” is displayed and the linear PCM recorder stops
recording, the linear PCM recorder has an extra memory space for editing.
This is not a malfunction of the linear PCM recorder.
 If the recording data volume of one file requires over 1 GB for an MP3 file
and 2 GB for an LPCM/DSD file, the subsequent recording starts as a new
file due to the specifications of the linear PCM recorder.
The memory card is not
recognized.
 Since the memory card may contain image data or other files, the memory
required for creating initial folders is insufficient. Use Windows Explorer or
other tools to erase unnecessary files or initialize the memory card on the
linear PCM recorder.
 Select “Memory Card” from “Select Memory” of the “Common Settings”
menu.
No sound comes from
the built-in speaker.
 Headphones are plugged in. Remove the headphones (page 45).
Troubleshooting (continued)