User Manual

80
Message Meaning/Solution
Set Date&Time The clock is not set. Set it before operating the linear PCM recorder (page
22).
Only activated for 16-bit
LPCM
The “SBM” item is effective only when the quantifying bit number is set to 16
bit (page 68).
File full The total number of files including folders has reached the maximum (4,095
files), and you cannot record or divide any more files. To reduce the number of
files, record new files in another folder, erase unnecessary files (page 58),
or store some of the files on your computer (page 63).
Memory full There is no remaining data space in the built-in memory or the memory card.
Erase unnecessary files (page 58), or store some of the files on your
computer (page 63) and then erase the contents of the memory.
Memory Card locked The inserted memory card is write-protected. Remove the memory card, and
release the write-protect setting.
Read only Memory Card A read-only memory card is inserted. Use a memory card that the linear PCM
recorder supports (page 25).
Memory Card access
denied
A memory card with an access control function is inserted. Functions
including recording and playback are limited, and you cannot use the memory
card with the linear PCM recorder. Use a memory card that the linear PCM
recorder supports (page 25).
Memory Card not
supported
An incompatible memory card is inserted. Use a memory card that the linear
PCM recorder supports (page 25).
Unknown Memory Card A memory card that is not supported is inserted. Use a memory card that the
linear PCM recorder supports (page 25). We cannot guarantee operations
with unknown media.
No Memory Card A memory card is not inserted into the linear PCM recorder, and you therefore
cannot perform operations including “Copy to Memory Card,” “Move to
Memory Card,” “Memory Card” from “Select Memory,” or “Cross-Memory
Recording.” Insert a memory card that the linear PCM recorder supports
(page 25).
File protected For Windows computers
You cannot erase files that are set to “Read-only” on the computer. Display
the file using Windows Explorer and remove the check for “Read-only” under
“Properties.”
For Mac computers
You cannot erase files that are set to “Locked” on the computer. Display the
file in the Mac Finder and remove the check for “Locked” under “GetInfo” of
“File.”
Unknown data The file you are trying to play or record is an unsupported type of data or a
different file format. It cannot be played or recorded on the linear PCM
recorder.
Error messages