Operation Manual
Table Of Contents
- Read this first
- Welcome
- Using your VAIO desktop
- Locating connectors
- Starting your computer
- Shutting down your computer
- Using the keyboard
- Using the shortcut keys
- Setting up the monitor
- Using the mouse
- Using the CD and DVD drives
- Using the floppy disk drive
- Using the modem
- Expansion capabilities
- Using the Memory Stick™
- Using the Net MD drive (depending on your model*)
- Using power saving modes
- Connecting peripheral devices
- Getting help
- Sony's support options
- Troubleshooting
- About the computer and software
- My computer does not start
- The message 'Press
to continue, to enter setup' appears at startup - My computer does not shut down
- My system is running slowly
- My computer locks up
- My computer or software program is not responding
- Windows® locks up during shutdown
- My mouse does not work
- My mouse needs to be set up for left-hand use
- About the display
- About CDs and floppy disks
- My CD/DVD tray does not open
- I cannot play a CD
- I cannot play a DVD-ROM
- My floppy disk drive cannot write to a disk
- When I double-click an application icon, a message such as 'You must insert the application CD in...
- Why does my CD/DVD-RW not record at the highest speed?
- The reading speed of CD-RWs/DVD-RWs* is slow
- About sound
- About the modem
- About peripherals
- About digital video captures and DVgate
- About i.LINK™ devices
- About the computer and software
- Upgrading your VAIO computer
- Precautions
- Glossary
Sony VAIO Desktop User Guide
Connecting peripheral devices
52
nN
Connecting to a network
Your computer comes with a preinstalled Ethernet interface.
To connect to a network, proceed as follows:
1 Go to Start, right-click on My Computer and select Properties.
2 Click the Hardware tab and select Device Manager.
The Device Manager screen appears with the list of devices.
3 Under Network Adapters, right-click on Realtek RTL 8139 Family PCI Fast Ethernet NIC.
4 Click Properties.
5 Under Device Usage, select Use this device (enable).
6 Click OK to close the Properties window.
The Ethernet connection is now enabled.
! Connect only 10BASE-T/100BASE-TX cables to the Ethernet port. Using other cables or a telephone cable may cause a malfunction, excessive heat
or even fire in the port. If using this computer in Germany, please make sure you do not use an ISDN cable. It is physically very similar, but its higher
voltage of 12V may destroy the motherboard inside the computer.
✍ For more information about connecting your VAIO desktop to the network, please consult the Hardware troubleshooting section of the VAIO-Link
website:
How to troubleshoot network problems.
For help on connecting to a network, see your network administrator.