Operation Manual
Table Of Contents
- Read this first
- Welcome
- Using your VAIO desktop
- Locating connectors
- Starting your computer
- Shutting down your computer
- Using the keyboard
- Using the shortcut keys
- Setting up the monitor
- Using the mouse
- Using the CD and DVD drives
- Using the floppy disk drive
- Using the modem
- Expansion capabilities
- Using the Memory Stick™
- Using the Net MD drive (depending on your model*)
- Using power saving modes
- Connecting peripheral devices
- Getting help
- Sony's support options
- Troubleshooting
- About the computer and software
- My computer does not start
- The message 'Press
to continue, to enter setup' appears at startup - My computer does not shut down
- My system is running slowly
- My computer locks up
- My computer or software program is not responding
- Windows® locks up during shutdown
- My mouse does not work
- My mouse needs to be set up for left-hand use
- About the display
- About CDs and floppy disks
- My CD/DVD tray does not open
- I cannot play a CD
- I cannot play a DVD-ROM
- My floppy disk drive cannot write to a disk
- When I double-click an application icon, a message such as 'You must insert the application CD in...
- Why does my CD/DVD-RW not record at the highest speed?
- The reading speed of CD-RWs/DVD-RWs* is slow
- About sound
- About the modem
- About peripherals
- About digital video captures and DVgate
- About i.LINK™ devices
- About the computer and software
- Upgrading your VAIO computer
- Precautions
- Glossary
Sony VAIO Desktop User Guide
Getting help
70
nN
I cannot establish an i.LINK™ connection between two VAIO computers
❑ Disconnect then reconnect the i.LINK™ cable.
❑ If you still have no connection after waiting for a while, restart both computers.
❑ If either computer has just returned from a power saving mode, the connection may be affected. In this
case, make sure you perform a full restart before connecting them.
❑ Check that both units are in the same workgroup, and that the Sharing option is enabled.