User's Manual
Table Of Contents
- Table of contents
- Getting started
- Overview
- What you can do with your Wireless LAN Access Point
- System requirements
- About the manuals and Help files
- Names of parts and functions
- About the Access Point initial settings
- To return the Access Point settings to the factory default settings
- MAC address
- Setting and connections
- Configuring the Access Point settings
- Before configuring the Access Point settings
- Displaying the Access Point setup page
- About the Access Point password
- Configuring and changing settings for the Access Point
- Confirming the firmware version for the Access Point
- Confirming the status of the Access Point
- Connecting
- Connecting to a DSL modem, cable modem, or ISDN router
- Precautions when mounting the Access Point on a wall
- Additional information
- Precautions
- Specifications
- Getting help
- Glossary
- Troubleshooting
12
About the Access Point initial settings
The Access Point is configured as follows at shipment.
To return the Access Point settings to the factory default settings, see page
13.
Note
In the table below, “–” indicates that no setting is made at the time of shipment.
Common
Host Name homegate
Administrator Password –
Guest Password –
Time Server (NTP Server) –
DNS Server –
Operating Mode NAT Router Mode
NETWORK 1
Connection Method
Obtain an IP address automatically
Speed Auto-Detect
DHCP Client ID –
NETWORK 2
IP Address 192.168.11.1
Netmask 255.255.255.0
DHCP IP Address Pool Size 16
Speed Auto-Detect
WIRELESS
Network Name (SSID) ID printed on the ID label at the
rear of the product
Encryption (WEP) Disabled
WEP Key –
Key Length 40 bits (5 characters)
Frequency (Channel) 5.180 GHz (Channel 36)