User's Manual
Table Of Contents
- Table of contents
- Getting started
- Overview
- What you can do with your Wireless LAN Access Point
- System requirements
- About the manuals and Help files
- Names of parts and functions
- About the Access Point initial settings
- To return the Access Point settings to the factory default settings
- MAC address
- Setting and connections
- Configuring the Access Point settings
- Before configuring the Access Point settings
- Displaying the Access Point setup page
- About the Access Point password
- Configuring and changing settings for the Access Point
- Confirming the firmware version for the Access Point
- Confirming the status of the Access Point
- Connecting
- Connecting to a DSL modem, cable modem, or ISDN router
- Precautions when mounting the Access Point on a wall
- Additional information
- Precautions
- Specifications
- Getting help
- Glossary
- Troubleshooting
16
Displaying the Access Point setup page
To configure Access Point settings, go to the Access Point setup page. Use
one of the following three methods to display the Access Point setup page.
• Display the Access Point setup page using the Wireless Connection Easy
Setup Wizard provided on the Wireless LAN PC Card. (page 17)
Note
This method can only be used with Windows Me or Windows 2000.
• Display the Access Point setup page from the Wireless Panel. (page 17)
• Display the Access Point setup page by entering the IP address in the
web browser. (page 18)
Note
If your web browser is configured to use a web proxy server, set the browser proxy
settings so that the browser does not use a proxy server for the Access Point IP address.
(The factory default setting for the Access Point IP address is 192.168.11.1.)
z Hints
• The Access Point setup page for configuring Access Point settings is saved in the
Access Point internal memory. To display the Access Point setup page, it is not
necessary to connect to the Internet.
• When using an Ethernet connection to display the Access Point from your computer,
see “Display the Access Point setup page by entering the IP address in the web
browser. ” (page 18).