User's Manual
Table Of Contents
- Table of contents
- Getting started
- Overview
- What you can do with your Wireless LAN Access Point
- System requirements
- About the manuals and Help files
- Names of parts and functions
- About the Access Point initial settings
- To return the Access Point settings to the factory default settings
- MAC address
- Setting and connections
- Configuring the Access Point settings
- Before configuring the Access Point settings
- Displaying the Access Point setup page
- About the Access Point password
- Configuring and changing settings for the Access Point
- Confirming the firmware version for the Access Point
- Confirming the status of the Access Point
- Connecting
- Connecting to a DSL modem, cable modem, or ISDN router
- Precautions when mounting the Access Point on a wall
- Additional information
- Precautions
- Specifications
- Getting help
- Glossary
- Troubleshooting
17
Setting and connections
Note
Depending on the firmware version of the Access Point you are using, the displayed
screen may differ from that shown above.
Display the Access Point setup page using the Wireless
Connection Easy Setup Wizard provided on the Wireless
LAN PC Card
Note
This method can only be used with Windows Me or Windows 2000.
1 Connect the Access Point to the AC adapter.
z Hint
There is no power switch on the Access Point. Refer to the Quick Start Guide
(separate sheet) when connecting the Access Point to the AC adapter.
2 Start the Wireless Connection Easy Setup Wizard.
z Hint
To Start the Wireless Connection Easy Setup Wizard, install the Wireless Panel and
follow the onscreen instructions. However, you can start the Wireless Network Easy
Setup Wizard any time you like.
For details, refer to the Quick Start Guide.
3 Follow the onscreen instructions to configure the
communication settings for your computer.
After you have configured the communication settings for your
computer, follow the onscreen instructions to display the Access Point
setup page.
Display the Access Point setup page from the Wireless
Panel
1 Connect the Access Point to the AC adapter.
z Hint
There is no power switch on the Access Point. Refer to the Quick Start Guide
(separate sheet) when connecting the Access Point to the AC adapter.
2 Double-click the Wireless Panel icon (Received Signal Level
indicator) on the taskbar.
The main screen for the Wireless Panel appears.
3 Click AP Settings.
The web browser starts with the Access Point setup page displayed.