User's Manual
Table Of Contents
- Table of contents
- Getting started
- Overview
- What you can do with your Wireless LAN Access Point
- System requirements
- About the manuals and Help files
- Names of parts and functions
- About the Access Point initial settings
- To return the Access Point settings to the factory default settings
- MAC address
- Setting and connections
- Configuring the Access Point settings
- Before configuring the Access Point settings
- Displaying the Access Point setup page
- About the Access Point password
- Configuring and changing settings for the Access Point
- Confirming the firmware version for the Access Point
- Confirming the status of the Access Point
- Connecting
- Connecting to a DSL modem, cable modem, or ISDN router
- Precautions when mounting the Access Point on a wall
- Additional information
- Precautions
- Specifications
- Getting help
- Glossary
- Troubleshooting
18
Display the Access Point setup page by entering the IP
address in the web browser.
1 Connect the Access Point to the AC adapter.
z Hint
There is no power switch on the Access Point. Refer to the Quick Start Guide
(separate sheet) when connecting the Access Point to the AC adapter.
2 Start up your web browser.
3 Type “http://192.168.11.1/” in the URL entry field, then press
Enter.
The Access Point setup page is displayed.
z Hints
• The IP address above is the factory default setting for the Access Point. If the IP
address has been changed, contact your network administrator.
• When using the NAT Router mode, the Access Point IP address is set to the
default gateway for that network.
• When using the Bridge mode, contact your network administrator for the Access
Point IP address.
About the Access Point password
You can set two types of Access Point passwords, administrator password
and guest password. Neither of these passwords is set when the Access
Point is shipped from the factory. Therefore, all users are able to configure
Access Point settings and display the status of the Access Point. If you want
to restrict the privileges of users, you can set a password as described on
the Easy Setup page or the various mode setting pages of Advanced Setup.
Passwords and restrictions on executable functions are as follows.
Password types and ability to use executable functions
Function Administrator Guest
Status display Possible Possible
Easy Setup Possible Not possible
Advanced Setup Possible Not possible
Display Indicator Possible Not possible
Firmware update Possible Not possible