User's Manual

103
Setup Menu
Chapter 7 Menus
713 VIDEO SETUP REFERENCE
LEVEL
Set the video setup amount to be added to the composite output signal (in
59.94i mode only).
Sub-item
OUTPUT
LEVEL
In 59.94i mode
(UC)
Add the setup level selected by this item to the output signal.
0.0%, 7.5
%
In 59.94i mode (J) Add the setup level selected by this item to the output signal.
0.0%, 7.5%
715 VIDEO GAIN CONTROL Adjust the video output level.
–2048 to 0
to 848
716 CHROMA GAIN CONTROL Adjust the chroma output level.
–2048 to 0
to 848
717 CHROMA PHASE CONTROL Adjust the chroma phase.
–128 to 0
to 127
718 SETUP LEVEL (59.94i mode)/
BLACK LEVEL (50i mode)
Adjust the setup level (black level).
–272 to 0
to 272
719 SYSTEM PHASE SYNC Adjust the output signal sync phase.
–128 to 0
to 127
720 SYSTEM PHASE SC Adjust the output signal subcarrier phase.
0
to 511
726 H BLANKING WIDTH Select the horizontal blanking width of the output analog video signal.
narow (narrow)
: Digital blanking (narrow)
wide: Analog blanking (wide)
When “wide” is selected, the horizontal blanking width complies with
RS170A, and normally the blanking is widened and the image becomes
narrower. It is recommended to select “narow” at the editing stage, then
later, for broadcast transmission to select “wide”, to output a signal
conforming to the standard. Note, however, that “narow” has to be always
selected for SDI signals.
728 OUTPUT SCH PHASE Set the subcarrier H phase.
–512 (–512 (DEC))... 0 (0 (DEC))
... 511 (511 (DEC))
731
WIDE MODE
Specify whether to record and play back with the addition of wide picture
information.
Sub-Item
OUTPUT Select whether to add wide picture information to the signal output when
down-converter output is set to squeeze mode.
thru (through)
: Do not add.
auto: Add.
Notes
• To add wide picture information to the output signal, another setting is
required in addition to this item. In setup menu item 703, set line 16
(59.94i mode (J)), line 20 (59.94i mode (UC)), or line 23(50i mode) to
“thru”.
• In 59.94i mode (J), output of wide picture information is given priority if
the VITC insertion line is set to line 16 in setup menu item 601 or 602.
• In 59.94i mode (UC), output of wide picture information is given priority
if the VITC insertion line is set to line 20 in setup menu item 601 or 602.
740 MASTER LEVEL (HD) Adjust the high-definition video signal output from the HDSDI OUTPUT 1,
2 (SUPER) connectors. This adjusts the Y, PB, and PR levels
simultaneously.
–2048 to 0
to 846
741 Y LEVEL (HD) Adjust the Y level of the high-definition video signal output from the
HDSDI OUTPUT 1, 2 (SUPER) connectors.
–2048 to 0
to 846
742 PB LEVEL (HD) Adjust the PB level of the high-definition video signal output from the
HDSDI OUTPUT 1, 2 (SUPER) connectors.
–2048 to 0
to 846
Menu items in the 700s, relating to video control
Item number Item name Settings