Operating Instructions Personal Entertainment Organizer PEG-T665C
Table Of Contents
- Table of Contents
- About this manual
- Which manual to read?
- Chapter 1: What is the Sony CLIÉ Handheld?
- Chapter 2: Setting up your Sony CLIÉ Handheld – Basics
- Step 1: Charging your Sony CLIÉ Handheld
- Step 2: Turning on your Sony CLIÉ Handheld for the first time
- Step 3: Entering data into your Sony CLIÉ Handheld
- Step 4: Installing the Palm™ Desktop for CLIÉ software on your computer
- Step 5: Connecting your Sony CLIÉ Handheld and your computer via the cradle
- Step 6: Performing a HotSync® operation for the first time
- Chapter 3: Setting up your Sony CLIÉ Handheld – Advanced
61
Setting up your Sony CLIÉ Handheld – Advanced
Chapter 3
5
Tap the application you want to transfer.
Note
Some applications are copy-protected and cannot be beamed. These are
listed with the lock icon next to them.
6
Tap Beam.
7
When the Beam dialog box appears, point the IR port
directly at the IR port of the receiving handheld.
Tip
For best results, the handhelds should be 4 to 8 inches (approximately 10 to
20 centimeters) apart, and the path between the two handhelds must be clear
of obstacles. Beaming distance to other Palm OS PDA devices may be
different.
8
Wait for the Beam dialog box to indicate that the
transfer is complete before you continue using your CLIÉ
handheld.