01US01COV.
01US01COV.book Page 2 Monday, December 15, 2003 2:35 PM The following manuals are included with your CLIÉ handheld. Refer to the following together with this manual. Printed manual * If your CLIÉ handheld was purchased in Europe, the manual is not in printed format, but is included as a PDF file on the Installation CD-ROM. Read This First (Operating Instructions), this manual* Explains setup and operation of your CLIÉ handheld. For safe use, make sure you read the supplied “Safety & Regulations Guide”.
01US01COV.book Page 3 Monday, December 15, 2003 2:35 PM Before use Caution IN NO EVENT SHALL SONY BE LIABLE FOR ANY INCIDENTAL, INDIRECT OR CONSEQUENTIAL DAMAGES OR OTHER DAMAGES INCLUDING WITHOUT LIMITATION LOSS OF PROFITS, LOSS OF REVENUE, LOSS OF DATA, LOSS OF USE OF THE PRODUCT OR ANY ASSOCIATED EQUIPMENT, DOWNTIME, AND PURCHASER’S TIME RELATED TO OR ARISING OUT OF THE USE OF THIS PRODUCT, ITS HARDWARE AND/OR ITS SOFTWARE.
01US01COV.book Page 4 Monday, December 15, 2003 2:35 PM Table of Contents Setting up your CLIÉ™ handheld Confirming the package contents . . . . . . . . . . . . . . . . 6 Setting up your CLIÉ™ handheld . . . . . . . 8 Charging your CLIÉ handheld. . . . . . . . . . . . . 8 Restarting your CLIÉ™ handheld . . . . . . .35 Supplied applications Using CLIÉ Manuals with your computer Performing the initial setup after turning on your CLIÉ handheld for the first time . . . . . 9 Manuals Overview . . . . . . .
01US01COV.book Page 5 Monday, December 15, 2003 2:35 PM Notes on this manual • This manual supports PEG-TJ37 and PEG-TJ27. – The illustrations in this manual are for PEG-TJ37, unless specified otherwise. – Differences between PEG-TJ37 and PEG-TJ27 are specified in each corresponding section. • Screen shots in this manual may be different from the actual displays in the supplied software. • The contents of this manual are written for users with a working knowledge of Windows®.
01US01COV.book Page 6 Monday, December 15, 2003 2:35 PM Setting up your CLIÉ™ handheld This chapter explains how to charge your CLIÉ handheld, perform the initial setup, and use it with your computer. Confirming the package contents Please confirm that all the following accessories are included in the package before setting up your CLIÉ handheld. CLIÉ handheld (1) AC power adapter (1) (including AC cord) USB cable (1) Stylus (1) The stylus is inserted into your CLIÉ handheld at the factory.
01US01COV.book Page 7 Monday, December 15, 2003 2:35 PM Installation CD-ROM (1) Setting up your CLIÉ™ handheld Strap (1) Refer to the illustration below to attach the strap.
01US01COV.book Page 8 Monday, December 15, 2003 2:35 PM Setting up your CLIÉ™ handheld The following operations are required before use. Step 1: Charging your CLIÉ handheld Before using your CLIÉ handheld for the first time, make sure you fully charge the battery. To a wall outlet 1 2 3 Connect the AC power adapter to the DC IN connector of the plug adapter. Connect the plug adapter to the interface connector of your CLIÉ handheld . Connect the AC cord to the AC power adapter (1).
01US01COV.book Page 9 Monday, December 15, 2003 2:35 PM Note If the battery of your CLIÉ handheld is completely discharged, all user data stored on your CLIÉ handheld will be lost. How to remove the plug adapter Setting up your CLIÉ™ handheld Remove by pressing the plug adapter on both sides as illustrated. Step 2: Performing the initial setup after turning on your CLIÉ handheld for the first time The first time you turn on your CLIÉ handheld, you need to make some initial settings.
01US01COV.book Page 10 Monday, December 15, 2003 2:35 PM Tips If you cannot turn on your CLIÉ handheld • Did you charge your CLIÉ handheld as described on page 8? b For details, refer to “Frequently Asked Questions: I cannot turn on my CLIÉ handheld” on page 51. • Perform a soft reset if you cannot turn on your CLIÉ handheld even after charging it (page 35). 2 Take out the stylus. You can use the stylus to enter text or to select applications.
01US01COV.book Page 11 Monday, December 15, 2003 2:35 PM 3 Following the on-screen instructions. Tap exactly in the center of the displayed mark. Tap the next targets, which are displayed at the bottom right and then in the center of the screen. The display in the screen depend on what country or region your CLIÉ handheld was purchased.
01US01COV.book Page 12 Monday, December 15, 2003 2:35 PM 5 6 Click [Yes] to confirm. (Only available for certain models or areas.) Tap the box next to [Set Time:]. The Set Time dialog box is displayed. Tip You can reconfigure the date and time settings in the Preferences screen. b For details, refer to “Customizing your CLIÉ™ handheld (Preferences): Setting up the Date & Time preferences” in the “Handbook” (PDF format). 7 Tap v or V to set the current time. Tap each box to set the hour and minute.
01US01COV.book Page 13 Monday, December 15, 2003 2:35 PM 9 Tap the box next to [Set Date:]. The Set Date screen is displayed. Setting up your CLIÉ™ handheld 10 Tap b or B to select the current year. 11 Tap the current month, then tap the current date. The Set Date screen closes. 12 Tap the box next to [Time Zone:]. The Set Time Zone screen is displayed.
01US01COV.book Page 14 Monday, December 15, 2003 2:35 PM 13 Tap the region to set the time zone, then tap [OK]. 14 Tap V next to [Daylight Saving:] and select [On] or [Off]. 15 Tap [Next].
01US01COV.book Page 15 Monday, December 15, 2003 2:35 PM 16 Tap [Next] and [Done]. Setting up your CLIÉ™ handheld b The CLIE Launcher is displayed. The initial setup is complete.
01US01COV.book Page 16 Monday, December 15, 2003 2:35 PM Using your CLIÉ™ handheld with your computer Palm™ Desktop for CLIÉ stored on the supplied Installation CD-ROM must be installed on your computer. The software is used for data transfer between your CLIÉ handheld and computer, and handling data on your computer such as Address Book. b For details on the system requirements of computer, refer to “System requirements” on page 66.
01US01COV.book Page 17 Monday, December 15, 2003 2:35 PM 1 2 Quit all applications running on Windows®. Insert the supplied Installation CD-ROM into the CD-ROM drive of your computer. The Installation CD-ROM window is displayed. 4 Select your language. (Only available for certain models or areas.) Click [Next] or [CLIÉ Basic], then click [Install] to install Palm™ Desktop for CLIÉ. The setup program starts and the InstallShield Wizard window is displayed.
01US01COV.book Page 18 Monday, December 15, 2003 2:35 PM 9 Click [Install]. Installation of Palm™ Desktop for CLIÉ starts. “InstallShield Wizard Completed” message is displayed in the InstallShield Wizard window when the installation is complete. 10 Click [Finish]. The Sony CLIÉ Handheld Registration window is displayed for models for the U.S.A., Canada, and Europe only. Tip If you do not want to sign up for the customer service, click [Register your CLIÉ].
01US01COV.book Page 19 Monday, December 15, 2003 2:35 PM Step 3: Connecting your CLIÉ handheld and computer via the USB cable Setting up your CLIÉ™ handheld You can synchronize data between your CLIÉ handheld and computer by connecting them with the supplied USB cable after installing Palm™ Desktop for CLIÉ. About the USB cable The supplied USB cable has two connectors. Connect the “A” plug to the USB port of your computer and the mini “B” plug to the plug adapter.
01US01COV.book Page 20 Monday, December 15, 2003 2:35 PM Step 4: Entering a user name for your CLIÉ handheld 1 Rotate the Jog Dial™ navigator to select (HotSync) on the CLIE Launcher and press the Jog Dial™ navigator. The HotSync screen is displayed. Tip You can also tap 2 Tap (HotSync) to display the HotSync screen. (HotSync) in the HotSync screen. The HotSync® operation starts. The Applications required for setup are installed automatically.
01US01COV.book Page 21 Monday, December 15, 2003 2:35 PM Installing the supplied applications on your CLIÉ™ handheld b For details on supplied applications, refer to “CLIÉ Application Manual” (HTML format). Note The supplied applications are designed to operate on your CLIÉ handheld only. Compatibility with other CLIÉ handhelds or Palm OS® PDAs is not guaranteed. Installing the applications from the supplied Installation CD-ROM 1 2 Quit all applications running on Windows®.
01US01COV.book Page 22 Monday, December 15, 2003 2:35 PM Basic operations of your CLIÉ™ handheld This chapter explains how to turn on and off your CLIÉ handheld, start an application, enter text, and perform a reset. Turning on/off your CLIÉ™ handheld Turning on your CLIÉ handheld Slide down the POWER/HOLD switch. Your CLIÉ handheld turns on, and the last screen you viewed is displayed.
01US01COV.book Page 23 Monday, December 15, 2003 2:35 PM Starting an application To work with your CLIÉ handheld, you need to start an application. The following explains how to start applications from the CLIE Launcher using the Jog Dial™ navigator. / (the Basic operations of your CLIÉ™ handheld Using the Jog Dial™ navigator and Left/Right buttons) 1 Displaying the CLIE Launcher 1 Tap (Home) (page 74). The CLIE Launcher is displayed.
01US01COV.book Page 24 Monday, December 15, 2003 2:35 PM 2 Press the Jog Dial™ navigator. The selected application starts. b Press Tip To select an application by CLIE Launcher groups If you press (the Left button) while the CLIE Launcher is displayed, you can select the CLIE Launcher groups in the left side of the screen. Rotate the Jog Dial™ navigator to select a CLIE Launcher group, and then press (the Right button) to select an application in that CLIE Launcher group.
01US01COV.book Page 25 Monday, December 15, 2003 2:35 PM Other ways to start an application You can also start an application using the stylus or application buttons. Using the stylus Start the application by pressing the screen directly with the supplied stylus. 2 Tap M m on the CLIE Launcher to display the application you want to start. Tap the application icon. The selected application starts.
01US01COV.book Page 26 Monday, December 15, 2003 2:35 PM Pressing the application buttons You can also start the applications by pressing the application buttons. The default setting of the application buttons are: Date Book, Address Book, To Do List, and Memo Pad. Tips • Even when your CLIÉ handheld is off, you can start an application by pressing one of the application buttons. • You can assign your favorite applications to the application buttons.
01US01COV.book Page 27 Monday, December 15, 2003 2:35 PM Entering text Using Graffiti® 2 writing to enter text Using the Graffiti® 2 writing area of your CLIÉ handheld Write strokes in the Graffiti® 2 writing area in the lower screen of your CLIÉ handheld to enter text. The Graffiti® 2 writing area is divided into two parts.
01US01COV.book Page 28 Monday, December 15, 2003 2:35 PM Entering text You need to start an application and display the screen in which you want to enter text. Follow the steps below to enter text. 1 2 3 Start an application, such as Date Book, in which you want to enter text. Tap the line where you want to enter text. Write the Graffiti® 2 strokes in the Graffiti® 2 writing area.
01US01COV.book Page 29 Monday, December 15, 2003 2:35 PM Other ways to enter text There are other ways to enter text into your CLIÉ handheld. You can use whichever is the most comfortable for you. z Handwriting system There is another way of using the handwriting system besides Graffiti® 2. b For details, refer to “Entering text on your CLIÉ™ handheld” in the “Handbook” Decuma Input (for PEG-TJ37 only) You can enter text using Decuma Input, which converts your handwriting into typed text as you write.
01US01COV.book Page 30 Monday, December 15, 2003 2:35 PM Synchronizing data between your CLIÉ handheld and computer (the HotSync® operation) What is the HotSync® operation? The HotSync® operation allows you to synchronize data between your CLIÉ handheld and computer, back up data from your CLIÉ handheld to your computer, and install add-on applications. b For details, refer to “Exchanging and updating files/data using the HotSync® operation (Other HotSync® operations)” in the “Handbook” (PDF format).
01US01COV.book Page 31 Monday, December 15, 2003 2:35 PM 5 Tap (HotSync) in the HotSync screen. The HotSync® operation starts. When the HotSync® operation is complete, the following screen is displayed. Double-click desktop. (Palm Desktop for CLIÉ) on the Windows Palm™ Desktop for CLIÉ starts and the Date Book window is displayed. If you select the same date you entered in Step 2, you will see the schedule for that day.
01US01COV.book Page 32 Monday, December 15, 2003 2:35 PM To display other application windows (Address Book, To Do List, and Memo Pad) Click any icon on the left side of the window. Performing the HotSync® operation using the wireless LAN function (available for PEG-TJ37 only). You can also synchronize data between your CLIÉ handheld and computer using the wireless LAN function.
01US01COV.book Page 33 Monday, December 15, 2003 2:35 PM Using the camera You can take pictures and view image files using your CLIÉ handheld as a digital still camera. b For details on CLIE Camera, refer to “CLIÉ Application Manual” (HTML format). Taking pictures Slide the Lens Cover Lever down, as shown in the illustration. CLIE Camera starts. The screen is displayed sideways. The first time you start CLIE Camera, a message about adjustment for Flicker control setting is displayed.
01US01COV.book Page 34 Monday, December 15, 2003 2:35 PM 3 Slide the Lens Cover Lever up. The lens cover is closed. Notes • By taking pictures, hold your CLIÉ handheld firmly with both hands and press the CAPTURE button slowly. • After the CAPTURE button is pressed when the viewfinder blacks out, your CLIÉ handheld captures an image. At this moment, do not move your CLIÉ handheld, otherwise the picture will be blurred. • Your CLIÉ handheld is equipped with a flicker control feature.
01US01COV.book Page 35 Monday, December 15, 2003 2:35 PM Restarting your CLIÉ™ handheld Normally, you do not need to reset your CLIÉ handheld. However, if your CLIÉ handheld does not turn on or respond, performing a soft reset may solve the problem. To reset your CLIÉ handheld, follow the procedure below. All records and add-on applications stored on your CLIÉ handheld are retained even after performing a soft reset. Gently press the RESET button with the stylus.
01US01COV.book Page 36 Monday, December 15, 2003 2:35 PM Performing a hard reset If the soft reset does not solve the problem, you may need to perform a hard reset to restart your CLIÉ handheld. Notes • All records and add-on applications stored on your CLIÉ handheld will be erased by performing a hard reset. • Perform a hard reset only if a soft reset does not solve the problem. However, you can restore the data if you have made a backup on your computer via the HotSync® operation*.
01US01COV.book Page 37 Monday, December 15, 2003 2:35 PM 4 Press (the Left button) on your CLIÉ handheld. Press (the Left button) (the Left The hard reset is performed. After restarting, your CLIÉ handheld displays “palm POWERED”, “SONY” and “CLIÉ”, followed by the SETUP screen. Refer to “Step 2: Performing the initial setup after turning on your CLIÉ handheld for the first time” on page 9 for the initial setup. After a hard reset, only the current date and time are retained.
01US01COV.book Page 38 Monday, December 15, 2003 2:35 PM Supplied applications The following applications are supplied with your CLIÉ handheld. b For details, refer to “CLIÉ Application Manual” (HTML format).
01US01COV.book Page 39 Monday, December 15, 2003 2:35 PM Image Converter Use Image Converter to convert image files on your computer to a format suitable for viewing on your CLIÉ handheld. Install Image Converter on your computer from the Installation CD-ROM, and prepare a “Memory Stick” media. Note Depending on where you live, playback of the movie files is not supported. Kinoma Player 2 (for PEG-TJ37 only) You can view still pictures with sound or play movies with sound. Note Only supported areas.
01US01COV.book Page 40 Monday, December 15, 2003 2:35 PM CLIE Mail You can browse, send and receive e-mail messages with your CLIÉ handheld. Install CLIE Mail from the Installation CD-ROM. When you want to read e-mail messages on your computer, you need to install CLIE Mail Conduit from the Installation CD-ROM. Notes • You must be connected to the Internet to send and receive e-mail messages beforehand. • PEG-TJ27 has no communication function and be able to only display e-mail messages.
01US01COV.book Page 41 Monday, December 15, 2003 2:35 PM Data Control Mobile Manager (for PEG-TJ37 only) / Mobile Connection Wizard (for PEG-TJ37 only) You can simplify set up your CLIÉ handheld on a network. Install Mobile Connection Wizard on your computer from the Installation CD-ROM, and make sure you connect your CLIÉ handheld to your computer with the USB cable and plug adapter. Notes CLIE Update Wizard You can update the contents of your CLIÉ handheld from Sony website.
01US01COV.book Page 42 Monday, December 15, 2003 2:35 PM Using CLIÉ Manuals with your computer You can also use the other manuals of your CLIÉ handheld that are stored on the supplied Installation CD-ROM. The manuals are to be read on your computer. Note Prior to using the manuals, refer to “Step 1: Installing the software on your computer” on page 16 to install Palm™ Desktop for CLIÉ. CLIÉ Manuals will be installed at the same time. Tip You can open CLIÉ Manuals from the supplied Installation CD-ROM.
01US01COV.book Page 43 Monday, December 15, 2003 2:35 PM How to perform basic operations and to use advanced features of your CLIÉ handheld Handbook “Handbook” (PDF format) describes the basic operations and advanced features of your CLIÉ handheld in detail. How to solve problems you may have Troubleshooting Q&A “Troubleshooting Q&A” (PDF format) helps solve common problems that you may have while using your CLIÉ handheld.
01US01COV.book Page 44 Monday, December 15, 2003 2:35 PM Opening CLIÉ Manuals Follow the steps below to open CLIÉ Manuals. 1 Double-click (CLIÉ Manuals PEG-TJ37 or CLIÉ Manuals PEG-TJ27) on the Windows desktop. The CLIÉ Application Guide PEG-TJ37/PEG-TJ27 window is displayed. Tip You can also click [Start], select [Programs] ([All Programs] for Windows XP)-[Sony Handheld][About PEG-TJ37] or [About PEG-TJ27], and click [CLIÉ Manuals] to start CLIÉ Manuals. 2 Click the manual you want to display it.
01US01COV.book Page 45 Monday, December 15, 2003 2:35 PM Reading the PDF manuals on your computer The following explains how to read the PDF format manuals on your computer. B Bookmarks are displayed. Click each title to display the page. Click to display the directories of the chapters. C Buttons for zooming in/out the page. D Click here and drag to scroll the page. E You can display the linked page by clicking a point where is displayed. F Buttons for displaying the previous or next page.
01US01COV.book Page 46 Monday, December 15, 2003 2:35 PM 4 Click [Install] to install Adobe Reader. Follow the on-screen instructions. 5 Click [Finish]. The Installation CD-ROM window closes. Reading the HTML manual on your computer (CLIÉ Application Manual) The following explains how to read the HTML format manual on your computer. Note You need Microsoft Internet Explorer version 5.0 or later to display “CLIÉ Application Manual” properly. A Click any application to display the explanation in detail.
01US01COV.book Page 47 Monday, December 15, 2003 2:35 PM Troubleshooting If you have problems, please follow the procedure below. Make note of any messages or alerts that are displayed. Step 1: Refer to CLIE FAQ, this manual, “Troubleshooting Q&A”, or the manual of each application • Refer to CLIE FAQ on your CLIÉ handheld. • Refer to “Troubleshooting Q&A” (PDF format). • Click (CLIÉ Manuals PEG-TJ37 or CLIÉ Manuals PEG-TJ27) on the Windows desktop for more information on applications.
01US01COV.book Page 48 Monday, December 15, 2003 2:35 PM Making a backup of the data or applications on your CLIÉ handheld Sony recommends that you make a backup of your data in case of unexpected problems. Backing up your data will ensure that it can be restored again on your CLIÉ handheld, even if you have to perform a hard reset. Making a backup using Memory Stick Backup Use “Memory Stick” media and Memory Stick Backup on your CLIÉ handheld to back up data and applications on your CLIÉ handheld.
01US01COV.book Page 49 Monday, December 15, 2003 2:35 PM Frequently Asked Questions If the solutions mentioned in this section do not solve your problem, refer to “Troubleshooting Q&A” (PDF format).
01US01COV.book Page 50 Monday, December 15, 2003 2:35 PM • HotSync Manager does not start.
01US01COV.book Page 51 Monday, December 15, 2003 2:35 PM My CLIÉ handheld does not work properly I cannot turn on my CLIÉ handheld B Is the POWER/HOLD switch of your CLIÉ handheld in HOLD mode (page 71)? Your CLIÉ handheld does not work when the POWER/HOLD switch is in HOLD mode. Make sure you release HOLD mode.
01US01COV.book Page 52 Monday, December 15, 2003 2:35 PM My CLIÉ handheld keeps turning itself off B Your CLIÉ handheld is designed to turn itself off after a period of inactivity (Automatic power-off). You can set the automatic power-off time by selecting time for [Auto-off After:] in [General] of the Preferences screen. Notes • The maximum idle time is 3 minutes. b For details, refer to “Customizing your CLIÉ™ handheld (Preferences): Setting the automatic power-off time” in the “Handbook” (PDF format).
01US01COV.book Page 53 Monday, December 15, 2003 2:35 PM Applications do not operate properly after a soft reset is performed B If you encounter application problems (such as improper operations, unusual display, or freezing during a soft reset) after you performed a reset, the reset may not be completed properly. In such a case, perform a soft reset once again (page 35). If you still cannot solve your problem, try a hard reset (page 36).
01US01COV.book Page 54 Monday, December 15, 2003 2:35 PM B Check that Graffiti® 2 is not shifted into Symbol mode. b For details, refer to “Entering text on your CLIÉ™ handheld: Using Graffiti® 2 writing to enter text” in the “Handbook” (PDF format). B If the letter “L” is registered as a menu command for an application, the letters “K”, “T”, “I”, and “X” will not work as menu command. B How to enter Graffiti® 2 characters faster and more accurately.
01US01COV.book Page 55 Monday, December 15, 2003 2:35 PM B If you are using Windows 2000 Professional or Windows XP, log in as an “Administrator.” B Is the USB cable properly connected to your computer (page 19)? B Is (HotSync) displayed in the task tray (Notification area) at the bottom right of your computer window? If not, click [Start], select [Programs] ([All Programs] for Windows XP)-[Sony Handheld], and click [HotSync Manager] to start HotSync Manager.
01US01COV.book Page 56 Monday, December 15, 2003 2:35 PM Data cannot be synchronized with some applications when the HotSync® operation is performed B Does the user name for Palm™ Desktop for CLIÉ match the one for your CLIÉ handheld? In Palm™ Desktop for CLIÉ, select the user name corresponding to your CLIÉ handheld user name. B Is the application set not to synchronize files? Click (HotSync) in the task tray (Notification area) at the bottom right of your computer window and select [Custom...
01US01COV.book Page 57 Monday, December 15, 2003 2:35 PM HotSync Manager does not start. (HotSync) is not displayed in the task tray (Notification area) at the bottom right of my computer window B Reinstall Palm™ Desktop for CLIÉ. If you still cannot perform the HotSync® operation If you cannot solve your HotSync® operation problem by following the troubleshooting tips in this manual, follow the procedure below.
01US01COV.book Page 58 Monday, December 15, 2003 2:35 PM Windows XP, click [Hardware].) Click [Device Manager] and check that [USB controller] is displayed in the Device Manager window. If USB controller is not displayed b For details, refer to the manual of your computer. I cannot play music (for PEG-TJ37 only) MP3 files cannot be read or played B Check that the MP3 files are located in [PALM/Programs/MSAUDIO] directory on the “Memory Stick” media.
01US01COV.book Page 59 Monday, December 15, 2003 2:35 PM Customer Support and Customer Registration ■ For customer support information Double-click (CLIÉ Info) on the Windows desktop, and select [CLIÉ™ Handheld Support]. ■ For online customer registration (For customers in the U.S.A. , Canada, and Europe only) Double-click (CLIÉ Info) on the Windows desktop, and select [Sony CLIÉ™ Registration].
01US01COV.book Page 60 Monday, December 15, 2003 2:35 PM Notes on use Handling your CLIÉ handheld • Make sure you do not scratch or damage your CLIÉ handheld’s screen. Always use the supplied stylus to tap on the screen. Do not use a writing pen, pencil, or other sharp object on the screen. • Do not expose your CLIÉ handheld to rain or moisture. Should water enter the circuitry through the buttons or switches, your CLIÉ handheld may be damaged. • Your CLIÉ handheld’s screen is made of glass.
01US01COV.book Page 61 Monday, December 15, 2003 2:35 PM Battery considerations Battery safety Charging • It takes approximately four hours to fully charge your CLIÉ handheld when the battery is completely drained. • If you charge your CLIÉ handheld every day, it takes only a few minutes to charge the battery. • You can operate your CLIÉ handheld while the battery is being charged.
01US01COV.book Page 62 Monday, December 15, 2003 2:35 PM Using peripheral devices If a low battery warning is displayed while using a peripheral device, charge your CLIÉ handheld as soon as possible, otherwise your CLIÉ handheld may shut of suddenly. When the battery power gets low • When the battery power gets low, a warning message is displayed on the screen, the “Memory Stick” media becomes inaccessible, and the backlight adjustment will no longer operate.
01US01COV.book Page 63 Monday, December 15, 2003 2:35 PM Specifications OS Palm OS® 5(Ver.5.2) Audio frequency response (for PEG-TJ37 only) 20 Hz to 20,000 Hz CPU i.MXL Application Processor Memory 32 MB (RAM) User memory range:approx. 23 MB External input/output Interface connector IrDA (1.2) “Memory Stick” slot Wireless LAN (IEEE802.
01US01COV.book Page 64 Monday, December 15, 2003 2:35 PM Formats (when viewing) Image file: JPEG (DCF) format Movie file (for PEG-TJ37 only)*: * Only supported areas. QuickTime file format* * The playback is only capable for the files created for Mobile Movie products. Maximum image file recording capacity (when using a 128MB “Memory Stick” media in the standard mode) 640 × 480 dpts : Approx. 1,000 files 320 × 480 dpts : Approx. 1,500 files 320 × 240 dpts : Approx. 2,000 files 160 × 120 dpts : Approx.
01US01COV.book Page 65 Monday, December 15, 2003 2:35 PM Camera Effective pixels Approx. 310,000 pixels Image pickup device 1/4 inch CMOS image sensor Lens Wireless LAN function (for PEG-TJ37only) Applied standard IEEE 802.11b Frequency band 2.4 GHz band (1 - 11ch, ISM band) F2.8/focal length 3.6 mm (35 mm film equivalent f=approx. 35 mm) Focus range 0.
01US01COV.book Page 66 Monday, December 15, 2003 2:35 PM System requirements Design and specifications are subject to change without notice. The following are the system specifications required to run Palm™ Desktop for CLIÉ and software supplied on the Installation CD-ROM.
01US01COV.book Page 67 Monday, December 15, 2003 2:35 PM CLIÉ™ handheld components This chapter explains each part of your CLIÉ handheld, the supplied accessories, and additional information.
01US01COV.book Page 68 Monday, December 15, 2003 2:35 PM A Cover slots (Page 79) For attaching the protective soft cover B POWER LED (Page 8) Lights or blinks when turned on. The LED shows the status of your CLIÉ handheld by its color. Lights green: The power is on. (It also lights in HOLD mode) Blinks green: Blinks a few moments when you operate any button on your CLIÉ handheld in HOLD mode. Lights orange: The battery is being charged.
01US01COV.
01US01COV.book Page 70 Monday, December 15, 2003 2:35 PM A Stylus (Page 10) A pointed tool to operate your CLIÉ handheld by touching the screen with it. H “Memory Stick” Slot (Page 72) Insert a “Memory Stick” media into this slot. B Speaker (for PEG-TJ37 only) Buzzer (for PEG-TJ27 only) I RESET Button (Pages 35, 36) Press to restart your CLIÉ handheld. C POWER/HOLD Switch (Pages 9, 71) Turns your CLIÉ handheld on and off, and sets your CLIÉ handheld to HOLD mode.
01US01COV.book Page 71 Monday, December 15, 2003 2:35 PM POWER/HOLD switch z Turning on/off your CLIÉ handheld Slide down the POWER/HOLD switch The POWER/HOLD switch will return to the center position after being released. Your CLIÉ handheld powers on, the last screen viewed is displayed, and the POWER LED lights green. To turn off your CLIÉ handheld, slide down the POWER/HOLD switch again and then release.
01US01COV.book Page 72 Monday, December 15, 2003 2:35 PM Using “Memory Stick” media z Inserting “Memory Stick” media The “Memory Stick” LED blinks orange while your CLIÉ handheld is writing data to, or reading data from a “Memory Stick” media. Note Insert a “Memory Stick” media in the right direction. If you forcibly insert a “Memory Stick” media in the wrong direction, the “Memory Stick” slot may be damaged.
01US01COV.book Page 73 Monday, December 15, 2003 2:35 PM IR port You can beam data or applications between your CLIÉ handheld and another CLIÉ handheld or Palm OS® PDA. b For details, refer to “Beaming” in the “Handbook” (PDF format). * Move your CLIÉ handheld gradually to find the most sensitive direction.
01US01COV.book Page 74 Monday, December 15, 2003 2:35 PM Locating the components of the CLIE Launcher Tip If a different screen is displayed, tap A Time Indicator Displays the current time. To change the display format, specify [Time:] from [Formats] in the Preferences screen. b For details, refer to “Customizing your CLIÉ™ handheld (Preferences): Setting the display format for time, date, and numbers” in the “Handbook” (PDF format).
01US01COV.book Page 75 Monday, December 15, 2003 2:35 PM H Application Manager icons You can manage your applications with the application manager icons. The following are featured as standard functions. : Beam I Application icon J Position indicator K Calculator Tap to display the on-screen Calculator. L Find icon Tap to display the dialog box finding data or applications.
01US01COV.book Page 76 Monday, December 15, 2003 2:35 PM Status Information You can display the Status Info dialog box by dragging the stylus from the Graffiti 2 writing area toward the upper left of the screen. b The status information displays the following icons. Additional icons will be displayed according to the applications in use. Tap each icon to get further information in detail. Displays the battery’s remaining charge. is displayed while the battery is being charged.
01US01COV.book Page 77 Monday, December 15, 2003 2:35 PM Each icon indicates the information on the “Memory Stick” media inserted into your CLIÉ handheld. “Memory Stick” media is inserted. “Memory Stick” media is not inserted. “Memory Stick” media is write-protected. “Memory Stick” media is not read correctly. A “Memory Stick” compatible device is inserted. Tap the icon to display the Media Info dialog box when “Memory Stick” media is inserted.
01US01COV.book Page 78 Monday, December 15, 2003 2:35 PM Tap to display the Adjust Volume dialog box. 1 Turns off the sound of your CLIÉ handheld. When Muting mode is selected, is displayed in the Status Info dialog box*. 2 Adjusts the volume level for playing back audio files*. 3 Adjusts the volume level for System sound, Alarm sound, and Game sound. This affects the [General] settings in Preferences screen.
01US01COV.book Page 79 Monday, December 15, 2003 2:35 PM Removing the protective soft cover from your CLIÉ handheld Slide the cover downwards (1), then remove it (2). Attaching the protective soft cover to your CLIÉ handheld 79 Sony Personal Entertainment Organizer PEG-TJ37/TJ27 3-088-727-12 (1) CLIÉ™ handheld components Place the tabs into the cover slots of your CLIÉ handheld (1), then slide the cover upwards until it locks into place (2).
01US01COV.book Page 80 Monday, December 15, 2003 2:35 PM z INDEX A G AC power adapter . . . . . . . . . . . . . 6, 8 AeroPlayer for CLIE (for PEG-TJ37 only) . . . . . . . . . . . . . . 39 Applications Installing . . . . . . . . . . . . . . . . . . . . 21 Quitting . . . . . . . . . . . . . . . . . . . . 24 Starting . . . . . . . . . . . . . . . . . . . . . 23 Giga Pocket Plugin (for PEG-TJ37 only) . . . . . . . . . . . . . . 39 H HotSync® operation . . . . . . . . . . . . . 30 I B Backup . . . . . . .
01US01COV.book Page 81 Monday, December 15, 2003 2:35 PM P Palm™ Desktop for CLIÉ . . . . . . . . . 16 Picsel Viewer for CLIE (for PEG-TJ37 only) . . . . . . . . . . . . . . 40 R Restarting Hard reset . . . . . . . . . . . . . . . . . . . 36 Soft reset . . . . . . . . . . . . . . . . . . . 35 S Set date . . . . . . . . . . . . . . . . . . . . . . 13 Set time . . . . . . . . . . . . . . . . . . . . . . 12 Setting up . . . . . . . . . . . . . . . . . . . . . . 8 Specifications . . . . . . . . . . . . . . .
01US01COV.
01US01COV.book Page 83 Monday, December 15, 2003 2:35 PM On the trademarks Before using your CLIÉ handheld, make sure you read the accompanying End-User’s License Agreement. • Sony, CLIÉ, “Memory Stick”, “Memory Stick Duo”, “Memory Stick PRO”, “Memory Stick PRO Duo”, “MagicGate Memory Stick”, Jog Dial, and their logos are trademarks of Sony Corporation. • Palm, Palm Powered, the Palm logo, the Palm Powered logo, Palm OS, Graffiti, HotSync and the HotSync logo are trademarks of PalmSource, Inc.
01US01COV.book Page 84 Monday, December 15, 2003 2:35 PM For the latest information on support, CLIÉ products and accessories, check our official Sony CLIÉ website For customers in the U.S.A. and Canada http://www.sony.com/clie/ For customers in Australia, Hong Kong, Malaysia, Mexico, New Zealand, Singapore, Taiwan, Thailand, and U.A.E. http://www.sony.net/clie-online/ For customers in Europe http://www.sony-europe.